Commit Graph

10 Commits

Author SHA1 Message Date
Adrian Schmutzler
85b1f4d8ca treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.

Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.

Note:

This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 11:30:06 +01:00
Luis Araneda
192838e018 zynq: rename zedboard with correct manufacturer
The board is made by Avnet, so rename it accordingly as
upstream has done it

Also move the device to maintain alphabetic order

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-09-10 08:56:16 +02:00
Luis Araneda
64f4c3ef35 zynq: add support for the Zybo Z7 board
The board is manufactured by Digilent
Main features:
- Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20)
- RAM: 1 GB DDR3L
- FLASH: 16 MB QSPI
- 1 Gbps Ethernet
- USB 2.0
- microSD slot
- Pcam camera connector
- HDMI Tx and Rx
- Audio codec: stereo out, stereo in, mic
- 5 (Z7-10) or 6 (Z7-20) Pmod ports
- 6 push-buttons, 4 switches, 5 LEDs
- 1 (Z7-10) or 2 (Z7-20) RGB LEDs

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-08-25 15:33:51 +02:00
Luis Araneda
61b977fa2c zynq: fix detection of the zybo board
The board_name was being tested for "xlnx,zynq-zybo",
but the .dts compatible string is "digilent,zynq-zybo"

Also, sorted the boards alphabetically, and added an
error message for unsupported boards

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-06-07 09:00:49 +02:00
Luis Araneda
7967e6c067 zynq: remove hard-coded network configuration
This is no longer necessary since commit 57776e6
(base-files: remove default /etc/config/network,
generate it via board.d instead)

Run-tested: ZedBoard

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
2018-06-07 09:00:49 +02:00
Mathias Kresin
e4e984f2a0 treewide: use only board_name function to get name
Do not parse /tmp/sysinfo/board_name, /proc/cpuinfo or the device tree
compatible string directly. Always use the board_name function to get
the board name.

The admswconfig package still reads /proc/cpuinfo directly. The code
looks somehow broken and the whole adm5120 which uses this package
looks unmaintained. Leave it as it is for now.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
John Crispin
be1985471e zynq: Add Zybo device support
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49257
2016-04-26 11:44:29 +00:00
John Crispin
869d3adc37 Zynq: Add Zedboard device support
Tested-by: Joe Zhang <jz21082@gmail.com>
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49256
2016-04-26 11:44:26 +00:00
John Crispin
2d45ad07fc zynq: add new target
Add support for Xilinx ZC702 Dev board

Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.

Patch is tested with Xilinx ZC702 Dev board with SD boot mode.

known issues:
 - no QSPI driver in 4.4 kernel: no QSPI flash support
 - USB is not working in 4.4 kernel

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

 create mode 100644 package/boot/uboot-zynq/Makefile
 create mode 100644 target/linux/zynq/Makefile
 create mode 100644 target/linux/zynq/base-files.mk
 create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
 create mode 100644 target/linux/zynq/base-files/etc/config/network
 create mode 100644 target/linux/zynq/base-files/etc/inittab
 create mode 100644 target/linux/zynq/config-4.4
 create mode 100644 target/linux/zynq/image/Makefile
 create mode 100755 target/linux/zynq/image/mkits.sh
 create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
 create mode 100644 target/linux/zynq/profiles/zc702.mk

SVN-Revision: 48697
2016-02-12 08:29:24 +00:00