Commit Graph

184 Commits

Author SHA1 Message Date
Paul Spooren
f922a3e00e config: add KERNEL_LSM symbol
The LSM (Linux security mechanism) list is the successor of the now
legacy *major LSM*. Instead of defining a single security mechanism the
LSM symbol is a comma separated list of mechanisms to load.

Until recently OpenWrt would only support DAC (Unix discretionary access
controls) which don't require an additional entry in the LSM list. With
the newly introduced SELinux support the LSM needs to be extended else
only a manual modified Kernel cmdline (`security=selinux`) would
activate SELinux.

As the default OpenWrt Kernel config sets DAC as default security
mechanism, SELinux is stripped from the LSM list, even if
`KERNEL_DEFAULT_SECURITY_SELINUX` is activated. To allow SELinux without
a modified cmdline this commit sets a specific LSM list if
`KERNEL_SECURITY_SELINUX` is enabled.

The upstream Kconfig adds even more mechanisms
(smack,selinux,tomoyo,apparmor), but until they're ported to OpenWrt,
these can be ignored.

To compile SELinux Kernel support but disable it from loading, the
already present options `KERNEL_SECURITY_SELINUX_DISABLE` or
`KERNEL_SECURITY_SELINUX_BOOTPARAM` (with custom cmdline `selinux=0`)
can be used. Further it's possible to edit `/etc/selinux/config`.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-09-03 14:14:33 +01:00
Adrian Schmutzler
6362a04725 kernel: remove obsolete kernel version switches for 4.14
This removes switches dependent on kernel version 4.14 as well as
several packages/modules selected only for that version.

This also removes sched-cake-virtual, which is not required anymore
now that we have only one variant of cake.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-02 16:29:23 +02:00
Adrian Schmutzler
94198e2a1c rb532: drop target
This target is still on kernel 4.14, and recent attempts to move it to
kernel 5.4 have not led to success. The device tester reported that it
wouldn't boot with the following messages:

From sysupgrade:

  Press any key within 4 seconds to enter setup....
  loading kernel from nand... OK
  setting up elf image... OK
  jumping to kernel code

At this point the system hangs.

From CompactFlash:

  Press any key within 4 seconds to enter setup....
  Booting CF
  Loading kernel... done
  setting up elf image... kernel out of range kernel loading failed

The tester reported that the same was observed with current master
(kernel 4.14) as well. This looks like some kernel size restriction.

Since this target is quite old and only supports one device, and since
nobody else seemed interested in working on this for quite some time,
I decided to not put further work into analyzing the problem and drop
this together with the other 4.14-only targets.

Patchwork series:
https://patchwork.ozlabs.org/project/openwrt/list/?series=197066&state=*

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-02 16:29:22 +02:00
Thomas Petazzoni
168faef443 kernel: add options needed for SELinux
This adds a number of options to config/Config-kernel.in so that
packages related to SELinux support can enable the appropriate Linux
kernel support.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[rebase; add ext4, F2FS, UBIFS, and JFFS2 support; add commit message]
Signed-off-by: W. Michael Petullo <mike@flyn.org>
2020-08-31 01:15:41 +01:00
Thomas Petazzoni
aee58d52ce build: add support for SELinux to include/image.mk
This allows the build process to prepare a squashfs filesystem for use
with SELinux.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[rebase, add commit message]
Signed-off-by: W. Michael Petullo <mike@flyn.org>
2020-08-31 01:15:41 +01:00
Adrian Schmutzler
4e4ee46495 ar71xx: drop target
This target has been mostly replaced by ath79 and won't be included
in the upcoming release anymore. Finally put it to rest.

This also removes all references in packages, tools, etc. as well as
the uboot-ar71xx and vsc73x5-ucode packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-30 22:18:35 +02:00
Yuan Tao
ba2ddba56b config: kernel: fix missed CGROUP_HUGETLB symbol
The symbol KERNEL_CGROUP_HUGETLB is always used whenever KERNEL_CGROUPS is enabled.
The absence of this notation will cause the user to be asked to enter this parameter the first time it is compiled.

Signed-off-by: Yuan Tao <ty@wevs.org>
2020-08-24 01:09:30 +01:00
Daniel Golle
42abe56f1b kernel: further clean-up options and defaults
Remove `if !SMALL_FLASH` in places which are anyway already augmented
by `if !SMALL_FLASH`.
Always enable CONFIG_BLK_DEV_THROTTLING on !SMALL_FLASH devices rather
than just enabling it on bcm27xx.
Enabled CPU bandwidth provisioning for FAIR_GROUP_SCHED on !SMALL_FLASH
devices as CONFIG_FAIR_GROUP_SCHED is already enabled and becomes more
useful for cgroups with that option enbled as well.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-08-10 09:54:14 +01:00
Felix Fietkau
eb155f755a build: make prefix mapping of debug information optional
Remapping the local build path in debug information makes debugging
using ./scripts/remote-gdb harder, because files no longer refer to the full
path on the build host.

For local builds, debug information does not need to be reproducible,
since it will be stripped out of packages anyway.

For buildbot builds, it makes sense to keep debug information reproducible,
since the full path is not needed (nor desired) anywhere.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-08-06 12:36:24 +02:00
Stijn Tintel
5c3e83fa88 kernel: fix missing TRANSPARENT_HUGEPAGE symbols
Enabling KERNEL_TRANSPARENT_HUGEPAGE exposes 2 missing symbols:
* CONFIG_READ_ONLY_THP_FOR_FS
* TRANSPARENT_HUGEPAGE_ALWAYS
* TRANSPARENT_HUGEPAGE_MADVISE

The first one was added in 5.4, and is marked experimental there so just
disable it in the generic config.

For the latter two, we should not force the user to use either of them,
so add them as build-configurable kernel options.

Fixes: d1a8217d87 ("kernel: clean-up build-configurable kernel config symbols")
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2020-08-01 14:33:46 +01:00
Daniel Golle
9950bc92e3 kernel: add menuconfig entry for kernel CONFIG_CGROUP_NET_CLASSID
It was removed from target defaults though it didn't exist in the
build-systems kernel configuration options. Add it there.

Fixes: d1a8217d87 ("kernel: clean-up build-configurable kernel config symbols")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-07-31 22:50:38 +01:00
Adrian Schmutzler
1d5260cf72 build: add option to mark devices as BROKEN
By specifying "BROKEN := 1" or "BROKEN := y" for a device, it will be
hidden (and deselected) by default. By that, it provides a stronger
option to "disable" a device beyond just using DEFAULT := n.

To make these devices visible, just enable the BROKEN option in
developer settings as already implemented for targets and packages.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-07-30 21:49:07 +02:00
Daniel Golle
d1a8217d87 kernel: clean-up build-configurable kernel config symbols
Don't explicitely disable options in target/linux/generic/config-* if
they are already controlled in config/Config-kernel.in.
Add a bunch of new symbols  and prepare defaults for using only unified
hierarchy (ie. cgroup2). Update symbol dependencies while at it

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2020-07-30 16:59:47 +01:00
Hauke Mehrtens
f94b09867d build: Remove dependency of user space stack cookies from kernel
Currently the user space stack cookies work well also when the kernel
stack cookies are not activated. This is handled completely in user
space and does not need kernel support.

This dependency was probably needed some years ago when the libc did not
support stack cookies.

Reviewed-by: Ian Cooper <iancooper@hotmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-24 00:35:21 +02:00
Roman Yeryomin
2ca084ccaa build: improve ccache support
Set CCACHE_DIR to $(TOPDIR)/.ccache and CCACHE_BASEDIR to $(TOPDIR).
This allows to do clean and dirclean. Cache hit rate for test build
after dirclean is ~65%.
If CCACHE is enabled stats are printed out at the end of building process.
CCACHE_DIR config variable allows to override default, which could be useful
when sharing cache with many builds.
cacheclean make target allows to clean the cache.

Changes from v1:
- remove ccache directory using CCACHE_DIR variable
- remove ccache leftovers from sdk and toolchain make files
- introduce CONFIG_CCACHE_DIR variable
- introduce cacheclean make target

Signed-off-by: Roman Yeryomin <roman@advem.lv>
2020-07-11 15:19:53 +02:00
Javier Marcet
caf09f2b84 kernel: rename CONFIG_NETPRIO_CGROUP to CONFIG_CGROUP_NET_PRIO
This has been changed in kernel 3.14.

Signed-off-by: Javier Marcet <javier@marcet.info>
2020-06-27 00:19:13 +02:00
Ian Cooper
b933f9cf0c toolchain: remove gcc libssp and use libc variant
Removes the standalone implementation of stack smashing protection
in gcc's libssp in favour of the native implementation available
in glibc and uclibc. Musl libc already uses its native ssp, so this
patch does not affect musl-based toolchains.

Stack smashing protection configuration options are now uniform
across all supported libc variants.

This also makes kernel-level stack smashing protection available
for x86_64 and i386 builds using non-musl libc.

Signed-off-by: Ian Cooper <iancooper@hotmail.com>
2020-06-17 23:57:07 +02:00
Christopher Hill
b7a8a54542 ath79: add support for MikroTik RouterBOARD 493G (rb4xx series)
This patch adds support for the MikroTik RouterBOARD RB493G, ported
from the ar71xx target.

See https://routerboard.com/RB493G for details

Specification:
- SoC Qualcomm Atheros AR7161
- RAM: 256 MiB
- Storage: 128MiB NAND
- Ethernet: 9x 1000/100/10 Mbps
- USB 1x 2.0 / 1.0 type A
- PCIe: 3x Mini slot
- MicroSD slot

Working:
- Board/system detection
- Ethernet
- SPI
- NAND
- LEDs
- USB
- Sysupgrade

Enabled (but untested due to lack of hardware):
- PCIe - ath79_pci_irq struct has the slot/pin/IRQ mappings if needed

Installation methods:
- tftp boot initramfs image, scp then flash via "sysupgrade -n"
- nand boot existing OpenWrt, scp then flash via "sysupgrade -n"

Notes:
- initramfs image will not work if uncompressed image size over ~8.5Mb
- The "rb4xx" drivers have been enabled

Signed-off-by: Christopher Hill <ch6574@gmail.com>
2020-06-15 21:16:18 +02:00
Paul Spooren
07449f692c build: refactor JSON info files to profiles.json
JSON info files contain machine readable information of built profiles
and resulting images. These files were added in commit 881ed09ee6
("build: create JSON files containing image info").

They are useful for firmware wizards and script checking for
reproducibility.

Currently all JSON files are stored next to the built images, resulting
in up to 168 individual files for the ath79/generic target.

This patch refactors the JSON creation to store individual per image
(not per profile) files in $(BUILD_DIR)/json_info_files and create an
single overview file called `profiles.json` in the target directory.

Storing per image files and not per profile solves the problem of
parallel file writes. If a profiles sysupgrade and factory image are
finished at the same time both processes would write to the same JSON
file, resulting in randomly broken outputs.

Some target like x86/64 do not use the image code yet, resulting in
missing JSON files. If no JSON info files were created, no
`profiles.json` files is created as it would be empty anyway.

As before, this creation is enabled by default only if `BUILDBOT` is set.

Tested via buildroot & ImageBuilder on ath79/generic, imx6 and x86/64.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[json_info_files dir handling in Make, if case refactoring]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-03 12:17:45 +02:00
李国
a6b7c3e672 x86: generate EFI platform bootable images
Add EFI platform bootable images for x86 platforms. These images can
also boot from legacy BIOS platform.

EFI System Partition need to be fat12/fat16/fat32 (not need to load
filesystem drivers), so the first partition of EFI images are not ext4
filesystem any more.

GPT partition table has an alternate partition table, we did not
generate it. This may cause problems when use these images as qemu disk
(kernel can not find rootfs), we pad enough sectors will be ok.

Signed-off-by: 李国 <uxgood.org@gmail.com>
[part_magic_* refactoring, removed genisoimage checks]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-31 16:20:47 +02:00
Paul Spooren
cb007a7bf6 x86: switch image generation to new code
This commit introduces few related changes which need to be done in
single commit to keep images buildable between git revisions. In result
it retains all previous image creation possibilities with slight name
change of generated images. Brief summary of the commit:

* Split up image generation recipe to smaller chunks to make it more
  generic and reusable.

* Make iso images x86 specific and drop their definition as root
  filesystem.

* Convert image creation process to generic code specified in image.mk.

* Make geode subtarget inherit features from the main target instead of
  redefining them.

* For subtargets create device definitions with basic packages set.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
[rebased]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2020-03-21 10:36:00 +00:00
Chen Minqiang
ec5e8461c1 x86: make crashdump works
1. KERNEL_CRASH_DUMP should depends on KERNEL_PROC_KCORE (kexec use it)
2. select crashkernel mem size by totalmem
   mem <= 256M disable crashkernel by default
   mem >= 4G use 256M for crashkernel
   mem >= 8G use 512M for crashkernel
   default use 128M
3. set BOOT_IMAGE in kdump.init
4. resolve a "Unhandled rela relocation: R_X86_64_PLT32" error

Tested on x86_64

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
2020-03-20 21:45:06 +00:00
Hauke Mehrtens
69d179ec81 kernel: Use new symbol to deactivate MIPS FPU support
With kernel 5.4 the upstream kernel supports deactivating the FPU
support on MIPS. Use this new upstream feature instead of our older
patch which was removed when porting the kernel patches to kernel 5.4.

This way both options are set which should work for older kernel
versions and also new ones.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-02-28 17:50:46 +01:00
Xu Wang
2299808c68 base-files: add all buildinfo with INCLUDE_CONFIG
CONFIG_INCLUDE_CONFIG option is helpful for being able to rebuild the
exact same firmware as you see on a live OpenWRT instance, but it's
crucially missing feeds information, so we can't rebuild the exact same
package versions. This commit fixes this by adding the remaining feeds
(and version) buildinfo files to the image.

Signed-off-by: Xu Wang <xwang1498@gmx.com>
2020-02-27 12:14:09 +01:00
Hauke Mehrtens
b951f53fba build: Add additional kernel debug options
Make it possible to activate some additional kernel debug options.
This can be used to debug some problems in kernel drivers.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2020-02-22 16:34:57 +01:00
Hauke Mehrtens
947d2e0a70 build: Add KCOV kernel code coverage for fuzzing
The adds an option to activate KCOV (Code coverage for fuzzing).

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2020-02-22 16:34:57 +01:00
Hauke Mehrtens
431594a978 build: Add option KERNEL_KASAN
The kernel kernel address sanitizer is able to detect some memory
bugs in the kernel like out of range array accesses.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2020-02-22 16:34:57 +01:00
Hauke Mehrtens
d9b043c03c build: Add option KERNEL_UBSAN
The kernel Undefined Behavior Sanitizer is able to detect some memory
bugs in the kernel like out of range array accesses.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2020-02-22 16:34:57 +01:00
Adrian Schmutzler
7d7aa2fd92 brcm2708: rename target to bcm27xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-02-14 14:10:51 +01:00
Hauke Mehrtens
19cbac7d26 buildsystem: Make PIE ASLR option tristate
This tristate choose allows to select to build only some applications
with PIE enabled. On MIPS binaries are getting about 30% bigger when PIE
is activated for the, which is a huge increase.

Network exposed applications like dnsmasq should then be build with PIE
enabled, but some applications which are normally not parsing data from
the network do not have it activated. The regular option should give a
good trade off between extra flash and RAM memory usage and security.

This changes the default from building no applications with PIE to build
some specifically marked applications with PIE enabled. This option is
only activated for targets with bigger flash and RAM to not consume
extra memory on the very small targets. On SDK builds the Regular option
should always be selected, because some tiny targets share the
applications with big targets and only the images for the tiny targets
should contain the none PIE applications, but the images for the normal
targets should use PIE. The shared packages should always use PIE when
it should be normally activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
2020-01-13 15:34:36 +01:00
Rosen Penev
fb19fb868c libcxx: Depenency fixes
Don't build with uClibc-ng. It's totally unsupported as several functions
are missing.

Make the musl libc support conditional.

Fix hash with make check FIXUP=1. Apparently I based the Makefile off of
libedit and forgot to fix the hash.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Fixes: 856ea2bad3 ("libcxx: Add package")
2019-12-23 12:08:23 +01:00
Rosen Penev
856ea2bad3 libcxx: Add package
Currently in OpenWrt, there are two libc++: libstdcpp and uClibc++. The
former is huge and the latter supports only C++98 with some basic support
for C++11. Those C++ versions seem to be specific to the compiler version

libcxx supports C++11 and above while being much smaller than libstdcpp.
On mt7621, these are the sizes of the ipks that I get:

libstdcpp: 460786
libcxx: 182881
uClibc++:67720

libcxx is faster than uClibc++ and is under active development as part of
the LLVM project while uClibc++ is effectively dead.

This PR modifies uclibc++.mk to expose the make menuconfig option. Further
cleanup is beyond the scope of this PR. What that means is, this is not
used by default.

A g++-libcxx wrapper based on the uClibc++ one was added. Works the same
way.

Compile tested with all packages that use uclibc++.mk in their Makefiles
under mipsel_24kc. kismet fails compilation but that package needs to be
cleaned up and updated.

Runtime tested with gddrescue, gdisk, dcwapd, bonnie++, and aircrack-ng
on a TP-Link Archer C7v2.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2019-12-23 00:22:07 +01:00
Stijn Tintel
5f68333952 config: kernel: fix typo in HFSPLUG_FS_POSIX_ACL
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2019-11-28 02:02:17 +02:00
John Crispin
f4aaee01fa Revert "build: separate signing logic"
This reverts commit 4a45e69d19.

This broke the buildbots

Signed-off-by: John Crispin <john@phrozen.org>
2019-10-21 16:26:24 +02:00
Paul Spooren
4a45e69d19 build: separate signing logic
This separates the options for signature creation and verification

* SIGNED_PACKAGES create Packages.sig
* SIGNED_IMAGES add ucert signature to created images
* CHECK_SIGNATURE add verification capabilities to images
* INSTALL_LOCAL_KEY add local key-build to /etc/opkg/keys

Right now the buildbot.git contains some hacks to create images that
have signature verification capabilities while not storing private keys
on buildbot slaves. This commit allows to disable these steps for the
buildbots and only perform signing on the master.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-10-21 14:06:42 +02:00
Paul Spooren
419eff50f9 config: remove unused GCC_VERSION_4_8 config symbols
Lets remove unused GCC_VERSION_4_8 symbol after the series of patches
which has switched to target gcc-8 by default.

Signed-off-by: Paul Spooren <mail@aparcar.org>
[refactored into separate commit]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-10-09 09:13:44 +02:00
Paul Spooren
881ed09ee6 build: create JSON files containing image info
The JSON info files contain details about the created firmware images
per device and are stored next to the created images.

The JSON files are stored as "$(IMAGE_PREFIX).json" and contain some
device/image meta data as well as a list of created firmware images.

An example of openwrt-ramips-rt305x-aztech_hw550-3g.json

    {
      "id": "aztech_hw550-3g",
      "image_prefix": "openwrt-ramips-rt305x-aztech_hw550-3g",
      "images": [
        {
          "name": "openwrt-ramips-rt305x-aztech_hw550-3g-squashfs-sysupgrade.bin",
          "sha256": "db2b34b0ec4a83d9bf612cf66fab0dc3722b191cb9bedf111e5627a4298baf20",
          "type": "sysupgrade"
        }
      ],
      "metadata_version": 1,
      "supported_devices": [
        "aztech,hw550-3g",
        "hw550-3g"
      ],
      "target": "ramips/rt305x",
      "titles": [
        {
          "model": "HW550-3G",
          "vendor": "Aztech"
        },
        {
          "model": "ALL0239-3G",
          "vendor": "Allnet"
        }
      ],
      "version_commit": "r10920+123-0cc87b3bac",
      "version_number": "SNAPSHOT"
    }

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-09-29 13:51:28 +02:00
Paul Spooren
e78c1baa9f rules: allow arbitrary log destination
Add option BUILD_LOG_DIR to menuconfig to change log destination.

The mix-up of *DIR* and *FOLDER* is confusing however.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-09-29 00:08:20 +02:00
Matthias Schiffer
61c57af618
build: set TARGET_ROOTFS_PARTSIZE to make combined image fit in 128MB
Change TARGET_ROOTFS_PARTSIZE from 128 to 104 MiB, so the whole image
(bootloader + boot + root) will fit on a 128MB CF card by default.

With these settings, the generated images (tested on x86-generic and
x86-64) have 126,353,408 bytes; the smallest CF card marketed as "128MB"
that I found a datasheet for (a Transcend TS128MCF80) has 126,959,616
bytes.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2019-09-21 13:48:15 +02:00
Daniel Golle
7cc22d72e9 config: kernel: only enable container features if !SMALL_FLASH
KERNEL_DEVPTS_MULTIPLE_INSTANCES and KERNEL_POSIX_MQUEUE were
previously enabled by default only if KERNEL_LXC_MISC was selected.
KERNEL_LXC_MISC was enabled only if the SMALL_FLASH (anti-)feature
was not selected.
Now that KERNEL_LXC_MISC no longer exists, make sure that those
options are also only enabled by default for !SMALL_FLASH targets.

Fixes: 4f94a331 ("config: kernel: remove KERNEL_LXC_MISC")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-09-12 13:17:24 +02:00
Yousong Zhou
4f94a331e1 config: kernel: remove KERNEL_LXC_MISC
Kernel features are neutral.  The two cascaded features can also be
useful for other container related tools

It's also less error-prone if only kconfig symbols from the kernel are
prefixed KERNEL_

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-09-12 02:30:26 +00:00
Yousong Zhou
083bb9b6a4 config: kernel: add KERNEL_X86_VSYSCALL_EMULATION
Binaries in container images may need this.  E.g. nginx:1.7.9 used in
k8s default deployment manifest file for demostration [1]

 [1] https://kubernetes.io/docs/concepts/workloads/controllers/deployment/#creating-a-deployment

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2019-09-12 02:30:26 +00:00
Paul Spooren
454021581f build: add buildinfo files for reproducibility
generate feeds.buildinfo and version.buildinfo in build dir after
containing the feed revisions (via ./scripts/feeds list -sf) as well as
the current revision of buildroot (via ./scripts/getver.sh).

With this information it should be possible to reproduce any build,
especially the release builds.

Usage would be to move feeds.buildinfo to feeds.conf and git checkout the
revision hash of version.buildinfo.

Content of feeds.buildinfo would look similar to this:

    src-git routing https://git.openwrt.org/feed/routing.git^bf475d6
    src-git telephony https://git.openwrt.org/feed/telephony.git^470eb8e
    ...

Content of version.buildinfo would look similar to this:

    r10203+1-c12bd3a21b

Without the exact feed revision it is not possible to determine
installed package versions.

Also rename config.seed to config.buildinfo to follow the recommended
style of https://reproducible-builds.org/docs/recording/

Signed-off-by: Paul Spooren <mail@aparcar.org>
2019-08-13 10:40:36 +02:00
Jo-Philipp Wich
f565f276e2 config: introduce separate CONFIG_SIGNATURE_CHECK option
Introduce a new option CONFIG_SIGNATURE_CHECK which defaults to the value
of CONFIG_SIGNED_PACKAGES and thus is enabled by default.

This option is needed to support building target opkg with enabled
signature verification while having the signed package lists disabled.

Our buildbots currently disable package signing globally in the
buildroot and SDK to avoid the need to ship private signing keys to
the build workers and to prevent the triggering of random key generation
on the worker nodes since package signing happens off-line on the master
nodes.

As unintended side-effect, updated opkg packages will get built with
disabled signature verification, hence the need for a new override option.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2019-08-06 21:22:27 +02:00
Álvaro Fernández Rojas
4295485719 brcm2708: add linux 4.19 support
Boot tested on Raspberry Pi B+ (BCM2708) and Raspberry Pi 2 (BCM2709)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-14 12:44:14 +02:00
Alexander Couzens
fdd0a8d491
Make linux kernel builds reproducible when BUILDBOT selected
The linux kernel is not reproducible because the build user
and domain is included into the kernel. Set the build user
to `builder` and build domain to buildhost.

It's also possible to build reproducible builds by setting
KERNEL_BUILD_USER KERNEL_BUILD_DOMAIN to static values.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2019-07-02 16:32:47 +02:00
Petr Štetiar
9c8e0b0e8a build: enable gzipped images for armvirt and malta
As we're now going to pad all images by default to 128MiB let's enable
compression of the images for armvirt and malta in order to save some
space and bandwidth.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-25 14:12:22 +00:00
Petr Štetiar
469ba337a7 build: make TARGET_ROOTFS_PARTSIZE 128MiB by default
As we're now going to pad all images by default, lets decrease the
default rootfs partition size from 256MiB to 128MiB in order to save
some space.

I'm keeping it above 100MiB in order to keep current behavior, where
overlay filesystem is using F2FS.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-25 14:12:21 +00:00
Petr Štetiar
d03ef97c1b build: remove TARGET_IMAGES_PAD option
It's being used only in x86 target to produce combined images, where
it's mandatory to have padded images in order to produce working
squashfs combined images usable in QEMU.

Currently we're producing unusable x86 combined squashfs images
(18.06.1, 18.06.2 and snapshots) as we don't enable TARGET_IMAGES_PAD,
thus providing very small space for the overlay filesystem, leading to
the following with OpenWrt 18.06.1 r7258-5eb055306f images on x86 QEMU:

 root@(none):/# mount | egrep 'root|overlay'
  /dev/root on /rom type squashfs
  /dev/loop0 on /overlay type ext4
  overlayfs:/overlay on / type overlay

 root@(none):/# df -h | egrep 'root|overlay|Size'
  Filesystem                Size      Used Available Use% Mounted on
  /dev/root                 2.5M      2.5M         0 100% /rom
  /dev/loop0              113.0K      8.0K     97.0K   8% /overlay
  overlayfs:/overlay      113.0K      8.0K     97.0K   8% /

So we should rather ensure proper image padding in image generation code
and we shouldn't rely on config options in order to generate usable
images.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-06-25 14:12:21 +00:00
Daniel Golle
fcb41decf6 config: enable some useful features on !SMALL_FLASH devices
enable kernel features needed for procd-ujail, procd-seccomp, lxc and
more on devices with big enough flash. Those packages are currently
useless in binary builds due to missing kernel features.
Enable the features on devices which can bare with the extra space
consumption.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2019-06-12 23:33:45 +02:00