Commit Graph

314 Commits

Author SHA1 Message Date
Tomasz Maciej Nowak
3a3d998c12 layerscape: resurrect support for FRDM-LS1012A
Re-add support for NXP FRDM-LS1012A, which mimics the flash layout of the
rest boards supported by LSDK.

0x000000000000-0x000000100000 : "bl2"
0x000000100000-0x000000500000 : "fip"
0x000000500000-0x000000600000 : "u-boot-env"
0x000000600000-0x000000a00000 : "reserved-1"
0x000000a00000-0x000000d00000 : "pfe"
0x000000d00000-0x000000f00000 : "reserved-2"
0x000000f00000-0x000001000000 : "dtb"
0x000001000000-0x000002000000 : "kernel"
0x000002000000-0x000004000000 : "ubifs"

Specification
SoC: LS1012A single core 800MHz
RAM: 512 MB DDR3
Flash: 64 MB QSPI NOR
Ethernet: 2x 10/100/1000 Mbps
Connectors: µUSB 3.0 OTG
            µUSB 2.0 (debugging & power input)
            2x 3.5mm jack for microphone & headphone (SGTL5000)
            Arduino Shield expansion with I2C, SPI, UART, and GPIO
            JTAG
LEDS: 3x (non-configurable)
Buttons: 1x (reset, non-configurable)

Be advised that erasing or writing 64MB flash takes some time to finish.
Do not reset the board until all operations end with success, otherwise
You'll need external tools to re-program the flash chip.

Installation
Follow the QSPI programing procedure for LS1012AFRWY board in
target/linux/layerscape/README, point 3.3.
Don't forget about updating U-Boot environment with MAC addresses of
ethernet interfaces, variable 'ethaddr' for eth0 and 'eth1addr' for eth1.

As the LSDK images do not support sysupgrade, nor do changes in this
commit, it's planed in upcoming submissions.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
2020-03-12 12:59:44 +01:00
Robert Marko
6256ca3232 ipq40xx: add support for 8devices Habanero DVK
This patch adds support for the 8devices Habanero development board.

Specs are:
CPU: QCA IPQ4019
RAM: DDR3L 512MB
Storage: 32MB SPI-NOR and optional Parallel SLC NAND(Some boards ship with it and some without)
WLAN1: 2.4 GHz built into IPQ4019 (802.11n) 2x2
WLAN2: 5 GHz built into IPO4019 (802.11ac Wawe-2) 2x2
Ethernet: 5x Gbit LAN (QCA 8075)
USB: 1x USB 2.0 and 1x USB 3.0 (Both built into IPQ4019)
MicroSD slot (Uses SD controller built into IPQ4019)
SDIO3.0/EMMC slot (Uses the same SD controller)
Mini PCI-E Gen 2.0 slot (Built into IPQ4019)
5x LEDs (4 GPIO controllable)
2x Pushbutton (1 is connected to GPIO, other to SoC reset)
LCD ZIF socket (Uses the LCD controller built into IPQ4019 which has no driver support)
1x UART 115200 rate on J18

2x breakout development headers
12V DC Jack for power
DIP switch for bootstrap configuration

Installation instructions:
Since boards ship with vendors fork of OpenWrt sysupgrade can be used.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2020-03-09 00:53:50 +01:00
Steven Lin
a736d912e2 ipq40xx: add support for EnGenius EAP2200
SOC:    IPQ4019 / QCA Dakota
CPU:    Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:   256 MiB
FLASH:  NOR 4 MiB + NAND 128 MiB
ETH:    Qualcomm Atheros QCA8072
WLAN1:  Qualcomm Atheros QCA4019 2.4GHz 802.11bgn 2:2x2
WLAN2:  Qualcomm Atheros QCA4019 5GHz 802.11a/n/ac 2:2x2
WLAN2:  Qualcomm Atheros QCA9888 5GHz 802.11a/n/ac 2:2x2
INPUT:  WPS Button
LEDS:   Power, LAN1, LAN2, WLAN 2.4GHz, WLAN 5GHz-1, WLAN 5GHz-2, OPMODE

1. Load Ramdisk via U-Boot

To set up the flash memory environment, do the following:
a. As a preliminary step, ensure that the board console port is connected to the PC using these RS232 parameters:
   * 115200bps
   * 8N1
b. Confirm that the PC is connected to the board using one of the Ethernet ports.
c. Set a static ip 192.168.99.8 for Ethernet that connects to board.
d. The PC must have a TFTP server launched and listening on the interface to which the board is connected.
e. At this stage power up the board and, after a few seconds, press 4 and then any key during the countdown.

U-BOOT> set serverip 192.168.99.9 && tftpboot 0x84000000 192.168.99.8:openwrt.itb && bootm

Signed-off-by: Steven Lin <steven.lin@senao.com>
[copied 4.19 dts to 5.4]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-02-28 22:29:10 +01:00
DENG Qingfang
e6cec17568 linux-firmware: update to 20200122
Update linux-firmware to 20200122

git log --pretty=oneline --abbrev-commit 20191215..20200122

1eb2408 linux-firmware: Update firmware file for Intel Bluetooth AX200
0dc1611 linux-firmware: Update firmware file for Intel Bluetooth AX201
d03f79c linux-firmware: Update firmware file for Intel Bluetooth 9560
aab62bc linux-firmware: Update firmware file for Intel Bluetooth 9260
ed0aa3a nvidia: add TU102/TU104/TU106 signed firmware
9c340bd amdgpu: update navi10 firmware for 19.50
3b4a503 amdgpu: Add navi10 TA ucode
16cc13a Merge branch 'v1.1.3' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.37f3177d mediatek: update MT8173 VPU firmware to v1.1.3
67d4ff5 Mellanox: Add new mlxsw_spectrum firmware xx.2000.2714
f1c9e7b radeon: update oland rlc microcode from amdgpu
b1dafb7 amdgpu: update vega20 microcode for 19.50
c38789e amdgpu: update vega12 microcode for 19.50
5a141c1 amdgpu: update vega10 microcode for 19.50
a03173a amdgpu: update picasso microcode for 19.50
86e9a5f amdgpu: update raven2 microcode for 19.50
febe09a amdgpu: update raven microcode for 19.50
af76fd0 amdgpu: update navi10 microcode for 19.50
b5b176a amdgpu: update navi14 microcode for 19.50
ad90178 amdgpu: add TA microcode for Raven asics
379551b qed: Add firmware 8.42.2.0
58b4003 Merge branch 'RB3-wlan-firmware-1387-v2' of https://github.com/andersson/linux-firmware
5967a45 Adjust WHENCE entry to check_whence doesn't complain
d1e743d Merge branch 'master' of https://github.com/NXP/mwifiex-firmware
d6219ab qcom: Switch SDM845 WLAN firmware
e65245c linux-firmware: add NXP firmware licence file
6871bff Merge branch 'ath10k-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
b142c2e ath10k: WCN3990 hw1.0: add firmware WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
8809b87 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00070
513d70c ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00047
203435b ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00070
a66d2fc ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00047
6d19154 ath10k: QCA6174 hw3.0: update board-2.bin
c4586ff linux-firmware: Update AMD cpu microcode

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-02-22 16:38:41 +01:00
Adrian Schmutzler
7d7aa2fd92 brcm2708: rename target to bcm27xx
This change makes the names of Broadcom targets consistent by using
the common notation based on SoC/CPU ID (which is used internally
anyway), bcmXXXX instead of brcmXXXX.
This is even used for target TITLE in make menuconfig already,
only the short target name used brcm so far.

Despite, since subtargets range from bcm2708 to bcm2711, it seems
appropriate to use bcm27xx instead of bcm2708 (again, as already done
for BOARDNAME).

This also renames the packages brcm2708-userland and brcm2708-gpu-fw.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-02-14 14:10:51 +01:00
Michael Yartys
1862263883 ath10k-firmware: update ath10k-ct firmware
This supports better per-chain noise floor reporting, which in turn allows for
better RSSI reporting in the driver.

Wave-2 fixes a long-standing rate-ctrl problem when connected to xbox (and probably other devices).

Wave-2 has fix for crash likely related to rekeying.

Wave-1 has some debugging code added where a user reported a crash.

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>  [ipq806x+qca9984,ipq4019+qca9986]
Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
2020-02-13 17:45:46 +01:00
Álvaro Fernández Rojas
ffbb8ed5a2 cypress-firmware: update to v4.14.77-2020_0115
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-02-01 10:59:51 +01:00
Christian Lamparter
a59f1ec30f ipq-wifi: drop deprecated .bin support
This patch converts the Qxwlan E2600AC image away from
the deprecated .bin file and to the new .qca4019 method.

As a result, we no longer need to carry around the
legacy support for handling .bin files.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-01-26 01:20:46 +01:00
Yen-Ting-Shen
51f3035978 ipq40xx: add support for EnGenius EMD1
SOC:     IPQ4018 / QCA Dakota
CPU:     Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7
DRAM:    256 MiB
NOR:     32 MiB
ETH:     Qualcomm Atheros QCA8072 (1 port)
WLAN1:   Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2
WLAN2:   Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2
INPUT:   RESET Button
LEDS:    White, Blue, Red, Orange

Flash instruction:

From EnGenius firmware to OpenWrt firmware:

In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emd1-squashfs-factory.bin directly.

From OpenWrt firmware to EnGenius firmware:

1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8
   Put the EnGenius firmware in the TFTP server directory on your computer.
2. Power up EMD1. Press 4 and then press any key to enter u-boot.
3. Download EnGenius firmware
   (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emd1-nor-fw-s.img
4. Flash the firmware
   (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script
5. Reboot
   (IPQ40xx) # reset

Signed-off-by: Yen-Ting-Shen <frank.shen@senao.com>
[removed BOARD_NAME]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-01-26 01:20:45 +01:00
Fredrik Olofsson
52b8c7a892 ipq40xx: Add support for D-Link DAP-2610
Specifications
==============
- SOC: IPQ4018
- RAM: DDR3 256MB
- Flash: SPI NOR 16MB
- WiFi:
    - 2.4GHz: IPQ4018, 2x2, front end SKY85303-11
    - 5GHz: IPQ4018, 2x2, front end SKY85717-21
- Ethernet: 1x 10/100/1000Mbps, POE 802.3af
- PHY: QCA8072
- UART: GND, blocked, 3.3V, RX, TX / 115200 8N1
- LED: 1x red / green
- Button: 1x reset / factory default
- U-Boot bootloader with tftp and "emergency web server" accessible
  using serial port.

Installation
============
Flash factory image from D-Link web UI. Constraints in the D-Link web UI
makes the factory image unnecessarily large. Flash again using
sysupgrade from inside OpenWrt to reclaim some flash space.

Return to stock D-Link firmware
===============================
Partition layout is preserved, and it is possible to return to the stock
firmware simply by downloading it from D-Link and writing it to the
firmware partition.

    # mtd -r write dap2610-firmware.bin firmware

Quirks
======
To be flashable from the D-Link http server, the firmware must be larger
then 6MB, and the size in the firmware header must match the actual file
size. Also, the boot loader verifies the checksum of the firmware before
each boot, thus the jffs2 must be after the checksum covered part. This
is solved in the factory image by having the rootfs at the very end of
the image (without pad-rootfs).

The sysupgrade image which does not have to be flashable from the D-Link
web UI may be smaller, and the checksum in the firmware header only
covers the kernel part of the image.

Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
[added WRGG Variables to DEVICE_VARS, squashed spi pinconf/mux,
added emd1's gmac0 config,fix dtc warnings]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-01-26 01:20:45 +01:00
DENG Qingfang
2d758129ca ath10k-firmware: fix mirror hash
Fix PKG_MIRROR_HASH hash mismatch.

Fixes: 641a93f0f2 ("ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047")
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[added missing commit description]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-01-24 08:21:04 +01:00
Tom Brouwer
2090b8af0a ipq40xx: add support for EZVIZ CS-W3-WD1200G EUP
Hardware:
SOC:    Qualcomm IPQ4018
RAM:	128 MB Nanya NT5CC64M16GP-DI
FLASH:  16 MB Macronix MX25L12805D
ETH:    Qualcomm QCA8075 (4 Gigabit ports, 3xLAN, 1xWAN)
WLAN:   Qualcomm IPQ4018 (2.4 & 5 Ghz)
BUTTON: Shared WPS/Reset button
LED:    RGB Status/Power LED
SERIAL: Header J8 (UART, Left side of board). Numbered from
        top to bottom:
        (1) GND, (2) TX, (3) RX, (4) VCC (White triangle
        next to it).
        3.3v, 115200, 8N1

Tested/Working:
* Ethernet
* WiFi (2.4 and 5GHz)
* Status LED
* Reset Button (See note below)

Implementation notes:
* The shared WPS/Reset button is implemented as a Reset button
* I could not find a original firmware image to reverse engineer, meaning
currently it's not possible to flash OpenWrt through the Web GUI.

Installation (Through Serial console & TFTP):
1. Set your PC to fixed IP 192.168.1.12, Netmask 255.255.255.0, and connect to
one of the LAN ports
2. Rename the initramfs image to 'C0A8010B.img' and enable a TFTP server on
your pc, to serve the image
2. Connect to the router through serial (See connection properties above)
3. Hit a key during startup, to pause startup
4. type `setenv serverip 192.168.1.12`, to set the tftp server address
5. type `tftpboot`, to load the image from the laptop through tftp
6. type `bootm` to run the loaded image from memory
6. (If you want to return to stock firmware later, create an full MTD backup,
e.g. using instructions here https://openwrt.org/docs/guide-user/installation/generic.backup#create_full_mtd_backup)
7. Transfer the 'sysupgrade' OpenWrt firmware image from PC to router, e.g.:
`scp xxx-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/upgrade.bin`
8. Run sysupgrade to permanently install OpenWrt to flash: `sysupgrade -n /tmp/upgrade.bin`

Revert to stock:
To revert to stock, you need the MTD backup from step 6 above:
1. Unpack the MTD backup archive
2. Transfer the 'firmware' partition image to the router (e.g. mtd8_firmware.backup)
3. On the router, do `mtd write mtd8_firmware.backup firmware`

Signed-off-by: Tom Brouwer <tombrouwer@outlook.com>
[removed BOARD_NAME, OpenWRT->OpenWrt, changed LED device name to board name]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2020-01-12 15:57:58 +01:00
Adrian Schmutzler
28fd4ac512 ixp4xx: remove unmaintained target
This target is still on kernel 4.9, and it looks like there is no
active maintainer for this target anymore.
Remove the code and all the packages which are only used by this target.

To add this target to OpenWrt again port it to a recent and supported
kernel version.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 16:45:08 +01:00
Hauke Mehrtens
80f06cb601 ath10k-firmware: Add kmod-ath10k-ct-smallbuffers to depends
Only select ath10k-ct-regular when smallbuffers version was not
selected.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-12-24 00:57:56 +01:00
Stefan Lippers-Hollmann
6598264266 ath10k-firmware: update Candela Tech firmware images
The release notes since last time for wave-1:

 * No changes to wave-1, but I make a version .014 copy anyway to keep
   the makefile in sync.

The release notes since last time for wave-2:

 * December 16, 2019: Wave-2 has a fix to make setting txpower work
                      better. Before setting the power was ignored at
                      least some of the time (it also appeared to work
                      mostly, so I guess it was being correctly set in
                      other ways).

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
2019-12-23 00:21:46 +01:00
DENG Qingfang
36baba65ec linux-firmware: update to 20191215
Update linux-firmware to 20191215

git log --pretty=oneline --abbrev-commit 20190815..20191215

eefb5f7 inside-secure: add new "mini" firmware for the EIP197 driver
dd1a12e Merge branch 'RB3-adsp-cdsp-mss-v4' of https://github.com/andersson/linux-firmware
c523dcd WHENCE: Add raspberry-pi4 SDIO file
99a15a4 Merge branch 'rpi4-fw' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware
2260cbd Merge branch 'master' of https://github.com/dikshitaagarwal/video_firmware_5.4
4c688be Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
e10ed21 qcom: update venus firmware files for v5.4
af4c4be cxgb4: Update firmware to revision 1.24.11.0
f93c7a1 brcm: Add BCM43455 NVRAM for Raspberry Pi 4 B
212e441 qcom: Add SDM845 Compute DSP firmware
ec84cf9 qcom: Add SDM845 Audio DSP firmware
62d0a1a qcom: Add SDM845 modem firmware
e8a0f4c rtl_nic: add firmware rtl8168fp-3
9581f15 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware
978c04e linux-firmware: Update NXP Management Complex firmware to version 10.18.0
c62c3c2 linux-firmware: Update firmware file for Intel Bluetooth AX201
6272383 linux-firmware: Update firmware file for Intel Bluetooth AX200
84a7ca5 linux-firmware: Update firmware file for Intel Bluetooth 9560
96c3994 linux-firmware: Update firmware file for Intel Bluetooth 9260
7319341 amdgpu: update navi14 vcn firmware
b363d9d amdgpu: update navi10 vcn firmware
f1100dd Merge branch 'ehl_tgl_guc_huc' of git://anongit.freedesktop.org/drm/drm-firmware
4debf21 i915: Add HuC firmware v7.0.3 for TGL
1eb2ac4 i915: Add GuC firmware v35.2.0 for TGL
4b0a210 i915: Add HuC firmware v9.0.0 for EHL
610fe75 i915: Add GuC firmware v33.0.4 for EHL
11bdc57 rtw88: RTL8723D: add firmware file v48
9e194c7 qed: Add firmware 8.40.33.0
4065643 amdgpu: add new navi14 wks gfx firmware for 19.30
d4f88ea amdgpu: update navi14 firmware for 19.30
ea755b6 amdgpu: update raven firmware for 19.30
340e06e linux-firmware: Add firmware file for Intel Bluetooth AX201
ad7a8b2 Mellanox: Add new mlxsw_spectrum2 firmware 29.2000.2308
e756bf3 Mellanox: Add new mlxsw_spectrum firmware 13.2000.2308
b27d123 rtl_nic: add firmware files for RTL8153
180e2b4 rtl_bt: Update configuration file for BT part of RTL8822CU
0acd93e bnx2x: Add FW 7.13.15.0.
2b016af linux-firmware: Update AMD cpu microcode
4c3e853 linux-firmware: Update firmware file for Intel Bluetooth AX200
7a79d22 linux-firmware: Update firmware file for Intel Bluetooth AX201
fdab23a linux-firmware: Update firmware file for Intel Bluetooth 9560
b68efd7 linux-firmware: Update firmware file for Intel Bluetooth 9260
aa95e90 amdgpu: add initial navi14 firmware form 19.30
c1ce20e rtlwifi: rtl8821ae: Add firmware for the RTL8812AE variant.
7d187ac ice: Fix up WHENCE entry and symlink
4c55b97 Merge branch 'dev-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/firmware
7c4db73 nvidia: Update Tegra210 XUSB firmware to v50.24
c054c53 nvidia: Add XUSB firmware for Tegra194
9cfefbd Remove duplicate symlinks
2de7abd copy-firmware: Create symlinks from WHENCE file
2116bcd Make symlinks consistent
c0590d8 amdgpu: update vega20 ucode for 19.30
43cc648 amdgpu: update vega12 ucode for 19.30
ffa0ed7 amdgpu: update vega10 ucode for 19.30
83e1b41 amdgpu: update picasso ucode for 19.30
7008617 amdgpu: update raven2 ucode for 19.30
9200baa amdgpu: update raven ucode for 19.30
f25a39c amdgpu: add new raven rlc firmware
9ae61e7 ice: Add package file for Intel E800 series driver
417a9c6 amdgpu: add initial navi10 firmware
702cc63 Merge branch 'cml_tgl-icl-dmc_huc_updates' of git://anongit.freedesktop.org/drm/drm-firmware
3182b4b Merge branch 'gpu-845' of https://github.com/ndechesne/linux-firmware
3ea84e5 drm/i915/firmware: Add v9.0.0 of HuC for Icelake
60ddd0e drm/i915/firmware: Add v4.0.0 of HuC for Cometlake
c47d8f8 drm/i915/firmware: Add v4.0.0 of HuC for Geminilake
2cdb78c drm/i915/firmware: Add v2.0.0 of HuC for Broxton
38965af drm/i915/firmware: Add v4.0.0 of HuC for Kabylake
8d127af drm/i915/firmware: Add v2.0.0 of HuC for Skylake
e7b6fa7 drm/i915/firmware: Add v33 of GuC for CML
e4ea25f drm/i915/firmware: Add v2.04 of DMC for TGL
51deca6 drm/i915/firmware: Add v1.09 of DMC for ICL
88ea23e qcom: add firmware files for Adreno a630
6c6918a linux-firmware: Update firmware file for Intel Bluetooth AX201
6ddb9d9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
d45c950 nvidia: Add XUSB firmware for Tegra186
65c6595 Add symlinks for Tegra VIC firmware binaries
0b22bfc rtl_bt: Update RTL8723D BT FW to 0x828A_96F1
f667c00 rtl_nic: add firmware rtl8125a-3
fe1ae0d linux-firmware: Add firmware file for Intel Bluetooth AX201
2f885ba Chelsio driver loads firmware configuration file to allow firmware to distribute resources before chip bring up. Chelsio NIC driver, cxgb4 searches for firmware config file at /lib/firmware/cxgb4/ directory.
7307a29 brcm: Add 43455 based AP6255 NVRAM for the Minix Neo Z83-4 Mini PC
65d02cd brcm: Add 43340 based AP6234 NVRAM for the PoV TAB-P1006W-232 tablet
f38fb4f Merge tag 'iwlwifi-fw-2019-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
40e4162 iwlwifi: update FWs to core45-152 release
c0fb3d9 check_whence: Add copy-firmware.sh to the list of ignored files
aa703aa rtl_bt: Update RTL8822C BT FW to V0x098A_94A4
665001a linux-firmware: Update firmware file for Intel Bluetooth AX200
c0ca980 linux-firmware: Update firmware file for Intel Bluetooth AX201
b6427bf linux-firmware: Update firmware file for Intel Bluetooth 9560
fe48882 linux-firmware: Update firmware file for Intel Bluetooth 9260
ebd40c6 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1886

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
[Added missing symbolic links to Makefile]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-12-23 00:20:55 +01:00
David Bauer
4113d8a255 ipq-wifi: add BDF for Aruba AP-303
The BDF originates from the vendor-firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-12-20 17:48:52 +01:00
Álvaro Fernández Rojas
859fac2b93 cypress-nvram: add new package
This package contains nvram files for brcmfmac, a mac80211 driver for FullMAC
Cypress devices.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-12-18 08:44:48 +01:00
Álvaro Fernández Rojas
1115c9aad3 brcmfmac-board-rpi: remove uneeded package
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-12-17 19:20:02 +01:00
Álvaro Fernández Rojas
e332453857 cypress-firmware: add new package
This package contains firmwares provided by Cypress
See https://community.cypress.com/community/linux

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-12-17 19:20:02 +01:00
Koen Vandeputte
487e0631d0 ath10k-firmware: update Candela Tech firmware images
The release notes since last time for wave-1:

  *  November 29, 2019:  Fix IBSS merge issue, related to TSF id leakage bug in firmware code.
                         Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test.

The release notes since last time for wave-2:

  *  December 6, 2019:  Fix 160Mhz problem caused by logic that did not take into account the fact that
                        160Mhz has only 1/2 of the NSS of lower bandwidths in the rate table.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-12-10 09:50:42 +01:00
Hauke Mehrtens
d3a8a62692 wireless-regdb: Make it build with python2
This backports a patch to build it work with python2 in addition to
python3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
2019-11-21 23:47:35 +01:00
Andre Heider
1bf1490eeb
am33x-cm3: remove
This is currently unused and not working anyway, since the used upstream
kernel loads am335x-pm-firmware.elf and not am335x-pm-firmware.bin [0].

The last downstream patches using the latter were removed with e4eef7e6.

Remove it instead of fixing it since the rtc-only sleep state can even
damage the hardware [1].

[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ccbbb9faac946ce61c241ce9f08b3486fabf031d
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302

Signed-off-by: Andre Heider <a.heider@gmail.com>
2019-11-20 10:49:01 +01:00
Zoltan HERPAI
32287b3913 firmware: intel-microcode: bump to 20190918
* New upstream microcode datafile 20190918

      *Might* contain mitigations for INTEL-SA-00247 (RAMBleed), given
      the set of processors being updated.
  * Updated Microcodes:
      sig 0x000306d4, pf_mask 0xc0, 2019-06-13, rev 0x002e, size 19456
      sig 0x000306f4, pf_mask 0x80, 2019-06-17, rev 0x0016, size 18432
      sig 0x00040671, pf_mask 0x22, 2019-06-13, rev 0x0021, size 14336
      sig 0x000406f1, pf_mask 0xef, 2019-06-18, rev 0xb000038, size 30720
      sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792
      sig 0x00050657, pf_mask 0xbf, 2019-08-12, rev 0x500002b, size 51200
      sig 0x00050662, pf_mask 0x10, 2019-06-17, rev 0x001c, size 32768
      sig 0x00050663, pf_mask 0x10, 2019-06-17, rev 0x7000019, size 24576
      sig 0x00050664, pf_mask 0x10, 2019-06-17, rev 0xf000017, size 24576
      sig 0x00050665, pf_mask 0x10, 2019-06-17, rev 0xe00000f, size 19456

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-11-10 23:39:29 +01:00
Zoltan HERPAI
db09335848 firmware: intel-microcode: bump to 20190618
* Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223
    CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
  * Updated Microcodes:
    sig 0x000206d6, pf_mask 0x6d, 2019-05-21, rev 0x061f, size 18432
    sig 0x000206d7, pf_mask 0x6d, 2019-05-21, rev 0x0718, size 19456

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-11-10 12:20:03 +01:00
Zoltan HERPAI
9a16bcfd79 firmware: intel-microcode: bump to 20190514
* New Microcodes:
    sig 0x00030678, pf_mask 0x02, 2019-04-22, rev 0x0838, size 52224
    sig 0x00030678, pf_mask 0x0c, 2019-04-22, rev 0x0838, size 52224
    sig 0x00030679, pf_mask 0x0f, 2019-04-23, rev 0x090c, size 52224
    sig 0x000406c3, pf_mask 0x01, 2019-04-23, rev 0x0368, size 69632
    sig 0x000406c4, pf_mask 0x01, 2019-04-23, rev 0x0411, size 68608
    sig 0x00050657, pf_mask 0xbf, 2019-02-27, rev 0x5000021, size 47104
    sig 0x000806e9, pf_mask 0x10, 2018-10-18, rev 0x009e, size 98304
    sig 0x000806eb, pf_mask 0xd0, 2018-10-25, rev 0x00a4, size 99328
    sig 0x000806ec, pf_mask 0x94, 2019-02-12, rev 0x00b2, size 98304
    sig 0x000906ec, pf_mask 0x22, 2018-09-29, rev 0x00a2, size 98304
    sig 0x000906ed, pf_mask 0x22, 2019-02-04, rev 0x00b0, size 97280

  * Updated Microcodes:
    sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288
    sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336
    sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552
    sig 0x000306d4, pf_mask 0xc0, 2019-03-07, rev 0x002d, size 19456
    sig 0x000306e4, pf_mask 0xed, 2019-03-14, rev 0x042e, size 16384
    sig 0x000306e7, pf_mask 0xed, 2019-03-14, rev 0x0715, size 17408
    sig 0x000306f2, pf_mask 0x6f, 2019-03-01, rev 0x0043, size 34816
    sig 0x000306f4, pf_mask 0x80, 2019-03-01, rev 0x0014, size 18432
    sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504
    sig 0x00040661, pf_mask 0x32, 2019-02-26, rev 0x001b, size 25600
    sig 0x00040671, pf_mask 0x22, 2019-03-07, rev 0x0020, size 14336
    sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352
    sig 0x000406f1, pf_mask 0xef, 2019-03-02, rev 0xb000036, size 30720
    sig 0x00050654, pf_mask 0xb7, 2019-04-02, rev 0x200005e, size 32768
    sig 0x00050662, pf_mask 0x10, 2019-03-23, rev 0x001a, size 32768
    sig 0x00050663, pf_mask 0x10, 2019-03-23, rev 0x7000017, size 24576
    sig 0x00050664, pf_mask 0x10, 2019-03-23, rev 0xf000015, size 23552
    sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456
    sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408
    sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360
    sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352
    sig 0x000506f1, pf_mask 0x01, 2019-03-21, rev 0x002e, size 11264
    sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728
    sig 0x000806e9, pf_mask 0x10, 2019-04-01, rev 0x00b4, size 98304
    sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000806ea, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000806eb, pf_mask 0xd0, 2019-03-30, rev 0x00b8, size 98304
    sig 0x000806ec, pf_mask 0x94, 2019-03-30, rev 0x00b8, size 97280
    sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304
    sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304
    sig 0x000906ed, pf_mask 0x22, 2019-03-17, rev 0x00b8, size 97280
  * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223
    CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-11-10 12:19:59 +01:00
Koen Vandeputte
f96af28272 ath10k-firmware: update Candela Tech firmware images
The release notes since last time for wave-1:

  *  October 5,  2019:  Fix too-short msg caused by invalid use of PayloadLen in receive path.
                        This appears to resolve the issue of getting (and ignoring) too-short commands
                        when we detect loss of CE interrupts and go into polling mode.

  *  October 12, 2019:  Fix regression in IBSS mode that caused SWBA overrun issues.  Related to
                        regression added during the ct-station logic, specifically TSF allocation.
                        Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test.

  *  October 15, 2019:  Only send beacon tx completion events if we can detect CT driver is being
                        used (based on CT_STATS_OK flag being set).  This should help CT firmware work
                        better on stock driver.

The release notes since last time for wave-2:

  *  October 15, 2019:  Only send beacon tx completion events if we can detect CT driver is being
                        used (based on ATH10k_USE_TXCOMPL_TXRATE2 | ATH10k_USE_TXCOMPL_TXRATE1 flags being set).
                        This should help CT firmware work better on stock driver.

  *  October 31, 2019:  Compile out peer-ratecode-list-event.  ath10k driver ignores the event.

  *  November 1, 2019:  Fix rate-ctrl related crash when nss and other things were changed while
                        station stays associated.  See bug: https://github.com/greearb/ath10k-ct/issues/96

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-11-05 15:43:22 +01:00
David Bauer
641a93f0f2 ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047
This fixes frequent crashes observed on a UniFi AC Mesh using OpenWrt
master and 19.07. 18.06 seems not affected from our testing.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-27 17:56:23 +01:00
David Bauer
a3914783a3 ath10k-firmware: retrieve wave 1 firmware from kvalo
This commit changes the source of the Wave 1 ath10k-firmware
from linux-firmware to Kall Valos ath10k-firmware repository.

This is necessary as the firmware selected in linux-firmware produces
frequent crashes in some circumstances.

This patch can be removed as soon as linux-firmware carries
10.2.4-1.0-00047 firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-27 14:51:24 +01:00
David Bauer
c0f4078164 ipq-wifi: add AVM FRITZ!Repeater 1200 bdf
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-23 01:17:28 +02:00
David Bauer
7a577e9a59 firmware: add Realtek RTL8822BE/RTL8822CE firmware
This commit adds packages for the Realtek RTl8822BE/RTL8822CE firmware
to be used with the rtw88 driver.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-22 09:16:24 +02:00
Robert Marko
7c930990af ath10k-firmware: update Candela Tech firmware images
This enables a feature flag in the wave-2 firmware wmi-services indicating it can send
software-encrypted raw frames.  This should in turn allow the AP-VLAN feature to work.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2019-09-15 22:56:09 +02:00
John Crispin
63c722c0be linux-firmware: add mediatek BT firmware
Signed-off-by: John Crispin <john@phrozen.org>
2019-08-30 07:27:51 +02:00
Koen Vandeputte
bd926fdde5 ath10k-firmware: update Candela Tech firmware images
This should fix a problem with 1560 MTU, 160Mhz on DFS channels,
some other small issues on < 5.2 kernels, and for 5.2 driver,
it pulls in some upstream stable fixes.

wave-1 firmware changes since last update:

  *  June 24, 2019: Try allocating low-priority WMI msgs if high-prio are not available.

  *  June 24, 2019: Init rate-ctrl to start at lowest rate instead of in the middle.  Hoping
                    this helps DHCP when station connects from a long distance.

wave-2:

  *  June 24, 2019  Start rate-ctrl at minimal values to help DHCP work better for far-away peers.

  *  July 24, 2019  Fix old regression that made /a (and probably /b/g) perform poorly, at least on
                    diet-compiled images.

  *  Aug 8, 2019  Improve a/b/g rate-ctrl by damping the PER swings caused by the all-or-nothing logic
                  of transmitting non-block-ack frames one at a time.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-27 10:32:44 +02:00
Hauke Mehrtens
9cdb4753be linux-firmware: intel: Use recent version of wifi firmware
iwlwifi from the new backports also supports more recent FW versions,
update to the most recent versions for already supported devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-08-18 22:17:35 +02:00
Christian Lamparter
8f757d427c ipq-wifi: drop upstreamed custom board-2.bin
The BDFs for the:
	ALFA Network AP120C-AC
	ASUS Lyra
	AVM FRITZ!Box 7530
	AVM FRITZ!Repeater 3000
	EnGenius EAP1300
	EnGenius ENS620EXT
	Netgear Orbi Pro SRK60

boards were upstreamed to the ath10k-firmware repository
and linux-firmware.git.

Furthermore the BDFs for the:
	OpenMesh A42 specific BDFs
	OpenMesh A62 specific BDFs
	Linksys EA6350v3
have been updated.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-08-18 20:56:41 +02:00
Christian Lamparter
4d34216ea5 linux-firmware: update to 20190815
Update linux-firmware to 20190815

git log --pretty=oneline --abbrev-commit 20190815..20190815

07b925b Install only listed firmware files
5621bfc rtw88: add a README file
7e431c5 rtw88: RTL8822C: add WoW firmware v7.3
2dc7023 rtw88: RTL8822C: update rtw8822c_fw.bin to v7.3
d3d000d Merge branch 'ath10k-20190808' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
d3e17e9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
d3f7234 Merge commit '70af908f4ad7aa8bc65032253f99a0a4fbe1e6c3' of https://github.com/Netronome/linux-firmware
1f0a99f ath10k: QCA9984 hw1.0: update board-2.bin
49c1187 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00046
1031f01 ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00045
cf714a2 ath10k: QCA9888 hw2.0: update board-2.bin
81e2e77 ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00040
8dc2dfb ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00045
1bd3ef2 ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00140-QCARMSWPZ-1
e043109 ath10k: QCA4019 hw1.0: update board-2.bin
b1e26aa cxgb4: update firmware to revision 1.24.3.0
70af908 nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.10.A.38
dff98c6 Merge branch 'master' of git://github.com/skeggsb/linux-firmware
580b076 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware
f9b0071 Merge tag 'iwlwifi-fw-2019-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
2a3b75d nvidia: add missing entries in WHENCE
6fc1eb1 linux-firmware: Update NXP Management Complex firmware to version 10.16.2
cd6cb7b iwlwifi: update -48 FWs for Qu and cc
b5f09bb iwlwifi: update FWs for 3168, 7265D, 9000, 9260, 8000, 8265 and cc
bf13a71 Merge branch 'guc_v33' of git://anongit.freedesktop.org/drm/drm-firmware
d52556e linux-firmware: Update firmware file for Intel Bluetooth AX201
dbcc2fb linux-firmware: Update firmware file for Intel Bluetooth 22161
a5ee415 linux-firmware: Update firmware file for Intel Bluetooth 9560
7444ca4 linux-firmware: Update firmware file for Intel Bluetooth 9260
3d1e553 amdgpu: update vega10 VCE firmware
5d4e3cc amdgpu: update picasso vcn firmware
6a45d9e amdgpu: update raven vcn firmware
9c8161f amdgpu: update tonga to latest 19.20 firmware
7b6c49c amdgpu: update vega12 to latest 19.20 firmware
4f7b71b amdgpu: partially revert 2579167548be33afb1fe2a9a5c141561ee5a8bbe
fd3cc24 amdgpu: update vega10 to latest 19.20 firmware
c190efa amdgpu: update polaris12 to latest 19.20 firmware
f42b54e amdgpu: update raven2 to latest 19.20 firmware
fc89ce8 amdgpu: update raven to latest 19.20 firmware
3bebb5a amdgpu: update picasso to latest 19.20 firmware
05dbae6 drm/i915/firmware: Add v33 of GuC for ICL
786f17a drm/i915/firmware: Add v33 of GuC for KBL
aae0eb5 drm/i915/firmware: Add v33 of GuC for SKL
9cf240f drm/i915/firmware: Add v33 of GuC for GLK
8a0a6a6 drm/i915/firmware: Add v33 of GuC for BXT
70e4394 linux-firmware: rsi: add firmware image for redpine 9116 chipset
fd69a5d linux-firmware: Add firmware file for Intel Bluetooth AX201
7ae3a09 Merge tag 'iwlwifi-fw-2019-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
90e6845 iwlwifi: add new firmwares for integrated 22000 series
71ef30c iwlwifi: update FW for 22000 to Core45-96
e58cbf7 iwlwifi: update FWs for 9000 series to Core45-96
b443218 iwlwifi: update Core45 FWs for 22260, 9000 and 9260
5157165 iwlwifi: udpate -36 firmware for 8000 series

This commit was created with the help of the make-package-update-commit.sh script.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-08-18 20:56:41 +02:00
Petr Štetiar
b6bae4a2c9 wireless-regdb: fix build when python2 from package feeds exists
wireless-regdb fails to build if there is python2 installed from package
feeds, as staging_dir/hostpkg/bin/python is python2 and
staging_dir/hostpkg/bin takes precedence over staging_dir/host/bin
(proper place with python -> python3 symlink) which leads to the build
failure of wireless-regdb, so this patch makes it explicit which python
should be used.

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Russell Senior <russell@personaltelco.net>
Tested-by: Lucian Cristian <lucian.cristian@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-08-04 22:09:20 +02:00
Álvaro Fernández Rojas
b0b5424378 linux-firmware: fix RPi 4 NVRAM
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-03 08:16:10 +02:00
Kevin Darbyshire-Bryant
12840674d0 wireless-regdb: fix patch fuzz
Refresh patches to tidy up some fuzz warnings

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-30 09:42:05 +01:00
John Crispin
8562e77953 wireless-regdb: fix Makefile indentation
Signed-off-by: John Crispin <john@phrozen.org>
2019-07-30 00:33:12 +02:00
Petr Štetiar
57d1c05ec9 wireless-regdb: set PKGARCH:=all
As it's an architecture-independent binary file.

Ref: https://github.com/openwrt/openwrt/pull/1521#issuecomment-514687053
Suggested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Petr Štetiar
d3853d17a3 wireless-regdb: prefer python provided by make variable
Usage of predefined make variables is preferred.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Zachary Riedlshah
ef3f868da0 wireless-regdb: update to 2019.06.03
Fixes build issues on a python3 host (issues with the print statement
formatting in the current build).

Includes 100-regdb-write-firmware-file-format-version-code-20.patch and
other fixes.

Closes bugs.openwrt.org/index.php?do=details&task_id=1605.

Uses the tarball as requested.

Signed-off-by: Zachary Riedlshah <git@zacharyrs.me>
2019-07-26 08:09:16 +02:00
Yangbo Lu
df0d555ea5 layerscape: convert to python3 for rcw
Python 2.7 will not be maintained past 2020. Let's convert
to python3 for rcw. Also drop byte swapping since TF-A had
been already used which handled byte swapping instead.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-07-26 08:09:16 +02:00
Álvaro Fernández Rojas
9e8932c17f brcm2708: switch to linux-firmware SDIO NVRAM
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-14 12:44:14 +02:00
Álvaro Fernández Rojas
aa00ac44d9 linux-firmware: add RPi SDIO NVRAM packages
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-14 12:44:14 +02:00
Hauke Mehrtens
7c640c2960 ath10k-firmware: Fix mirror hash
Fixes: 7f79882d44 ("ath10k-firmware: update board-2.bin for community firmwares")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-07-07 17:37:06 +02:00
Christian Lamparter
7f79882d44 ath10k-firmware: update board-2.bin for community firmwares
This patch updates the board-2.bin for the default
IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct
and -ct-htt firmwares.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-07-07 13:02:05 +02:00
Christian Lamparter
629e6538a1 linux-firmware: update to 20190618
Update linux-firmware to 20190618.

git log --pretty=oneline --abbrev-commit 20190416..20190618

acb56f2 cavium: Add firmware for CNN55XX crypto driver.
a03f1a0 linux-firmware: Update firmware file for Intel Bluetooth 22161
abb7cb6 linux-firmware: Update firmware file for Intel Bluetooth 9560
1e8253b linux-firmware: Update firmware file for Intel Bluetooth 9260
c436aaf linux-firmware: Update AMD SEV firmware
6ae3652 linux-firmware: update licence text for Marvell firmware
1884732 linux-firmware: update firmware for mhdp8546
87b35ca linux-firmware: rsi: update firmware images for Redpine 9113 chipset
55edf52 imx: sdma: update firmware to v3.5/v4.5
93d56c0 nvidia: update GP10[2467] SEC2 RTOS with the one already used on GP108
1f8ebdf linux-firmware: Update firmware file for Intel Bluetooth 8265
bccb385 linux-firmware: Update firmware file for Intel Bluetooth 9260
29a536a linux-firmware: Update firmware file for Intel Bluetooth 9560
cedd500 linux-firmware: Update firmware file for Intel Bluetooth 22161
e04cc56 amlogic: add video decoder firmwares
95a9353 iwlwifi: update -46 firmwares for 22260 and 9000 series
68040ce iwlwifi: add firmware for 22260 and update 9000 series -46 firmwares
fdfb153 iwlwifi: add -46.ucode firmwares for 9000 series
92e17d0 amdgpu: update vega20 to the latest 19.10 firmware
7536c3b amdgpu: update vega12 to the latest 19.10 firmware
2579167 amdgpu: update vega10 to the latest 19.10 firmware
4ea5c73 amdgpu: update polaris11 to the latest 19.10 firmware
4475802 amdgpu: update polaris10 to the latest 19.10 firmware
f9551dc amdgpu: update raven2 to the latest 19.10 firmware
9eaa40d amdgpu: update raven to the latest 19.10 firmware
3c1ab75 amdgpu: update picasso to the latest 19.10 firmware
8e3e08c linux-firmware: update fw for qat devices
cdef971 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1122
13d6bc8 drm/i915/firmware: Add ICL HuC v8.4.3238
1dbb095 drm/i915/firmware: Add ICL GuC v32.0.3
77b6b40 drm/i915/firmware: Add GLK HuC v03.01.2893
f8521cc drm/i915/firmware: Add GLK GuC v32.0.3
9fb9526 drm/i915/firmware: Add KBL GuC v32.0.3
3fbec60 drm/i915/firmware: Add SKL GuC v32.0.3
c7e32a1 drm/i915/firmware: Add BXT GuC v32.0.3

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-22 13:17:48 +02:00