Commit Graph

8 Commits

Author SHA1 Message Date
Álvaro Fernández Rojas
90e4c8c6e6 bmips: dgnd3700v2: fix network config
ucidef_set_bridge_device is needed for DGND3700v2 network config since VLAN 1
must be used for the switch to be correctly configured.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2022-05-23 21:05:59 +02:00
Álvaro Fernández Rojas
6a1e7c767f bmips: add linux v5.15 support
Build system: x86_64
Build-tested: generic, nand
Run-tested: generic/AR-5387un, nand/VR-3032u

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2022-05-20 12:21:03 +02:00
Rui Salvaterra
27b5bae2ec treewide: remove redundant ubifs kconfig symbols
For the targets which enable ubifs, these symbols are already part of the
generic kconfigs. Drop them from the target kconfigs.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
2021-04-21 10:31:07 +01:00
Álvaro Fernández Rojas
be16951494 bmips: dgnd3700-v2: fix ethernet
This is a temporary workaround to get the ethernet working, since external
switch is connected by MDIO and it needs additional work.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-16 20:00:51 +01:00
Álvaro Fernández Rojas
28dcb74de3 bmips: add experimental ethernet support
This adds experimental ethernet support for BCM6318, BCM6328, BCM6362, BCM6368
and BCM63268.
BCM6358 needs a different driver, so there's no support for now.

Working devices:
- Comtrend AR-5315u
- Comtrend AR-5387un
- Comtrend VR-3025u
- Comtrend VR-3032u

Not working devices:
- Netgear DGND3700 v2 (no idea on how the external switch is connected)
- Huawei HG556a ver B (BCM6358 needs a separate driveer)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-03-14 12:05:17 +01:00
Adrian Schmutzler
85b1f4d8ca treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.

Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.

Note:

This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 11:30:06 +01:00
Adrian Schmutzler
020e51facf bmips: split base-files into subtargets
Like done for several targets already, splitting base-files into
subtarget will provide smaller images due to more specific
distribution of files per subtarget and allow to use default cases
more effectively.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-23 00:26:40 +01:00
Álvaro Fernández Rojas
029093a302 bmips: add new target
This target has full device tree support, thus reducing the number of
patches needed for bcm63xx, in which there's a patch for every board.

The intention is to start with a minimal amount of downstream patches and
start upstreaming all of them.

Current status:
 - Enabling EHCI/OHCI on BCM6358 causes a kernel panic.
 - BCM63268 lacks Timer Clocks/Reset support.
 - No PCI/PCIe drivers.
 - No ethernet drivers.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-02-22 18:29:44 +01:00