Commit Graph

4529 Commits

Author SHA1 Message Date
Alexander Couzens
4943ce98ff
kernel/module/iio: add TI am335x ADC driver
Add the iio driver for the embedded ADC in the
TI Sitara am335x SoCs.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2022-11-24 15:47:01 +00:00
Jonas Albrecht
74a5718223 lantiq: ltq-tapi: add customer pulse digit time
With this patch you can change the pulse digit time by loading the Lantiq
FXS driver kernel module called ltq-tapi. This is relevant for old
rotaryphones that uses pulsedialing.

The default values are:
30-80ms for the low pulse
30-80ms for the high pulse
300ms for minimum Interdigit time

this is OK but on some Phones it can be usefull to customize the values
If you want to change the values to high and low pulse to 40-90ms and
minimum interdigit time to 400ms

than change /etc/modules.d/20-ltq-tapi to (without linebrakes):
drv_tapi min_digit_low=40  min_digit_high=90 max_digit_low=40 \
max_digit_high=90 min_interdigit=400

Signed-off-by: Jonas Albrecht <plonkbong100@protonmail.com>
2022-11-18 20:27:52 +01:00
Daniel Golle
ebe2b7190b
kernel: modules: package Marvell gigE PHY driver
Some copper SFP modules come with Marvell's 88E1xxx PHY and need this
module to function. Package it, so users can easily install this PHY
driver and use e.g. FINISAR CORP. FCLF-8521-3-HC SFP.

Without marvell PHY driver:
sfp sfp2: module FINISAR CORP.    FCLF-8521-3-HC   rev A    sn XXXXXXX          dc XXXXXX
mt7530 mdio-bus:1f sfp2: validation with support 0000000,00000000,00000000 failed: -22
sfp sfp2: sfp_add_phy failed: -22

With marvell PHY driver:
sfp sfp2: module FINISAR CORP.    FCLF-8521-3-HC   rev A    sn XXXXXXX          dc XXXXXX
mt7530 mdio-bus:1f sfp2: switched to inband/sgmii link mode
mt7530 mdio-bus:1f sfp2: PHY [i2c:sfp2:16] driver [Marvell 88E1111] (irq=POLL)
mt7530 mdio-bus:1f sfp2: Link is Up - 1Gbps/Full - flow control rx/tx

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-11-15 19:12:39 +00:00
Uwe Kleine-König
cec9cbef44 kernel: add kmod-hwmon-sht3x support
The driver supports the temperature and humidity sensors chips SHT3x and
STS3x by Sensirion.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
2022-11-13 20:47:57 +01:00
Andre Heider
6f729163b1 mt76: move the mt7921 firmware to its own package
It's not just required for the PCI version, but for USB and presumably
SDIO as well.

Tested with 0e8d:7961 Comfast CF-953AX (MT7921AU).

Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-11-12 20:26:48 +01:00
Felix Fietkau
9179f484bf mt76: update to the latest version
4bf2607362fc wifi: mt76: fix dbdc number of spatial streams limit

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-11-12 19:19:08 +01:00
Quintin Hill
bc67c27283 kernel: support for Realtek USB bluetooth devices
USB adaptors with the RTL8761B chipset are cheap and readily available
but so far support is missing in Openwrt.  Enable the relevant kernel
options and add a module to the kmod-bluetooth package.  Increases size
of kmod-bluetooth ipk from 279140 bytes to 285320 bytes on my ath79 build.

Tested on a WNDR3700v4 with rtl8761bu firmware.

Signed-off-by: Quintin Hill <stuff@quintin.me.uk>
2022-11-12 17:05:13 +01:00
Felix Fietkau
2403428c75 mt76: update to the latest version
8cc34bdc9ef0 wifi: mt76: mt7921: set MT_DRV_AMSDU_OFFLOAD for USB/SDIO
2182de50a37c wifi: mt76: fix receiving LLC packets on mt7615/mt7915
269df4b01f27 wifi: mt76: fix rx checksum offload on mt7615/mt7915/mt7921
fa4ace8e3b58 ieee80211: add EHT 1K aggregation definitions
176df35e7e80 wifi: mt76: mt7915: improve accuracy of time_busy calculation
94b335fa88e1 wifi: mt76: mt7915: add ack signal support
3365c129f73c wifi: mt76: mt7915: enable use_cts_prot support
ad9bd2ba361e wifi: mt76: mt7615: enable use_cts_prot support
68bdcccb0aa7 wifi: mt76: mt7915: fix reporting of TX AGGR histogram
242fece4323f wifi: mt76: mt7921: fix reporting of TX AGGR histogram
75003c69a9bd wifi: mt76: mt7615: rely on mt7615_phy in mt7615_mac_reset_counters
65c70a32f1cf wifi: mt76: move aggr_stats array in mt76_phy
b1ddf8bec058 wifi: mt76: mt7915: rework mt7915_dma_reset()
1ad31c3f76f4 wifi: mt76: mt7915: enable full system reset support
6b0668de7a53 wifi: mt76: mt7915: add full system reset into debugfs
a5e48378d2a6 wifi: mt76: mt7915: enable coredump support
1e9060420c92 wifi: mt76: mt7915: fix incorrect tx path number configuration
0263711ba362 wifi: mt76: mt7915: fix antenna selection with bad eeprom.
869815e5ef86 wifi: mt76: mt7915: Fix chainmask calculation on mt7915 DBDC
fc410557b7e1 wifi: mt76: mt7915: Fix VHT beamforming capabilities with DBDC
daa30a31cf70 wifi: mt76: mt7915: don't claim 160MHz support with mt7915 DBDC
80bcecdbc2ff wifi: mt76: connac: update nss calculation in txs
465219c1f56c wifi: mt76: do not run mt76u_status_worker if the device is not running
c7db15903e5c wifi: mt76: connac: add mt76_connac_mcu_uni_set_chctx
7a2b1a13b1b0 wifi: mt76: mt7921: add chanctx parameter to mt76_connac_mcu_uni_add_bss signature
dece6921e606 wifi: mt76: mt7921: add unified ROC cmd/event support
d4da182389b6 wifi: mt76: mt7921: drop ieee80211_[start, stop]_queues in driver
0c3ef988d8dc wifi: mt76: connac: accept hw scan request at a time
c477225fd10e mt7615: update cr4 firmware to 20190415154149
413a4bf39513 mt76: mt7915: fix unused-but-set variable
f5034abea899 mt76: mt7915: fix format string
a9ac73ed8275 wifi: mt76: mt7615: increase eeprom size for mt7663
4a27f23fc4f2 linux-firmware: update firmware for MT7921 WiFi device

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-11-11 20:05:27 +01:00
Felix Fietkau
161b22d103 mac80211: fix mesh airtime link metric estimation
fix reading the per-packet rate on devices with firmware rate control

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-11-10 14:47:07 +01:00
Felix Fietkau
a06e023b4e mac80211: remove old legacy legacy drivers
Get rid of drivers that are either limited to 802.11b/g or don't even support
cfg80211/mac80211. Most of these are either limited to boards that we don't even
support anymore because of firmware size, or were only used for custom hacks by
a really small number of users in the past.
Let's get rid of those to reduce the maintenance effort and the number of useless
packages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-11-09 20:44:28 +01:00
Andrew Powers-Holmes
94d0cb9d2e mt76: add firmware package for mt7916
Add kernel package 'mt7916-firmware' with firmware files for MT7916E devices.

These share the same driver as the MT7915 chipset, but use their own firmware.

Tested using a pair of AsiaRF AW7916-NPD cards.

Signed-off-by: Andrew Powers-Holmes <aholmes@omnom.net>
2022-11-09 20:43:32 +01:00
Nick Hainke
2426dbb734
mac80211: subsys: add tags to upstreamed patches
Some patches were already upstreamed.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-09 17:10:03 +01:00
Nick Hainke
b2272c6194
mac80211: rt2x00: add tags to upstreamed patches
Some patches are already upstreamed.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-09 17:09:30 +01:00
Nick Hainke
f472a2fb15
mac80211: brcm: add tag to upstreamed patch
Add tag to upstreamed patch.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-09 17:08:49 +01:00
Nick Hainke
6f5e1df597
mac80211: ath9k: add tag to upstreamed patch
Add tag to upstreamed patch.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-09 17:08:12 +01:00
Nick Hainke
c47f8dacb8
mac80211: ath10k: add tags for upstreamed patches
Add tags to already upstreamed patches.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-11-09 17:07:42 +01:00
Rafał Miłecki
b066ad7d9a kernel: improve description of NTFS kernel packages
This helps choosing the right NTFS driver from two available options.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-11-08 09:14:20 +01:00
Hauke Mehrtens
898b4104b3 ltq-tapi: Fix compile with kernel 5.15
Do not use find_vpid(), but get_task_pid() to get the pid from
pThrCntrl->tid. This is now a ponter to struct task_struct instead of
an integer.

This fixes the build of ltq-tapi with lantiq/xway.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-11-05 22:35:58 +01:00
Hauke Mehrtens
b3aa998f6c ltq-ifxos: Fix compile with ltq-tapi
Do not include asm/irq.h directly, but include linux/interrupt.h instead.
This fixes the build of ltq-tapi with lantiq/xway.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-11-05 22:35:46 +01:00
Martin Schiller
1e028ac51e kernel: further cleanup of xfrm[4|6]_mode*
In my commit da5c45f4d8 ("kernel: remove handling of xfrm[4|6]_mode_*
modules") I missed a few default config options and description entries.
Those should be gone as well.

Fixes: da5c45f4d8 ("kernel: remove handling of xfrm[4|6]_mode_* modules")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
2022-11-05 16:28:33 +01:00
Rafał Miłecki
c3322cf04a kernel: sort filesystems symbols alphabetically
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-11-02 20:10:42 +01:00
Hauke Mehrtens
633f3e1118 kernel: Add kmod-drm-ttm-helper
Add a package for drm_ttm_helper.ko. CONFIG_DRM_TTM_HELPER is compiled
into the kernel on armvirt/64, x86/64, x86/generic and x86/legacy
because also some DRM drivers are compiled into the kernel. On x86/geode
it is not compiled into the kernel, but kmod-drm-amdgpu and
kmod-drm-radeon depend on it.

This fixes the x86/geode build.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-11-01 14:47:14 +01:00
Martin Schiller
da5c45f4d8 kernel: remove handling of xfrm[4|6]_mode_* modules
For kernel versions before 5.2, the required IPsec modes have to be
enabled explicitly (they are built-in for newer kernels).

Commit 1556ed155a ("kernel: mode_beet mode_transport mode_tunnel xfram
modules") tried to handle this, but it does not really work.

Since we don't support these kernel versions anymore and the code is
also broken, let's remove it.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[Remove old generic config options too]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-10-31 21:58:15 +01:00
Florian Eckert
1dccc6e749 kernel: replace gpio-mcp23s08 with pinctrl-mcp23s08*
The kernel module gpio-mcp23s08 has been replaced by the new
pinctrl-mcp23s08* kernel modules.

There are now 3 kernel modules for this device
- Common module for both I2C and SPI kmod-pinctrl-mcp23s08
- Module for I2C kmod-pinctrl-mcp23s08-i2c
- Module for SPI kmod-pinctrl-mcp23s08-spi

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2022-10-30 23:14:45 +01:00
Andre Heider
8246ab6a27 mac80211: fix masking nested A-MSDU support for mesh
CONFIG_MAC80211_MESH isn't defined for this package, rendering the patch
useless. Match protecting the access of sta_info.mesh with the very same
define declaring it.

Fixes 45109f69a6 "mac80211: fix compile error when mesh is disabled"
Signed-off-by: Andre Heider <a.heider@gmail.com>
2022-10-25 00:32:58 +02:00
Felix Fietkau
e4b9538ddb mac80211: use KERNEL_MAKEOPTS instead of KERNEL_MAKE_FLAGS
Fixes issues with disabling stack validation on non-linux systems

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-24 20:49:34 +02:00
Felix Fietkau
24bf94ecb7 button-hotplug: simplify build
Remove unnecessary kconfig junk

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-24 20:49:34 +02:00
Hauke Mehrtens
58b65525f3 mac80211: Update to version 5.15.74-1
This updates mac80211 to version 5.15.74-1 which is based on kernel
5.15.74.
The removed patches were applied upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-10-23 22:33:46 +02:00
Nick Hainke
78cbcc77cc ksmbd: update to 3.4.6
Release Announcement:
https://github.com/cifsd-team/ksmbd/releases/tag/3.4.6

Remove upstreamed:
- 10-fix-build-on-kernel-5.15.52-or-higher.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-10-23 01:45:52 +02:00
Martin Blumenstingl
a075ddb8ca kernel: ltq-adsl-mei: Fix compilation with Linux 5.15
struct of_device_id is not implicitly included anymore. Include
<linux/mod_devicetable.h> to fix compilation on Linux 5.15.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2022-10-22 19:44:46 +02:00
Martin Blumenstingl
2964353927 kernel: ltq-vmmc: Fix compilation with Linux 5.15
MODULE_SUPPORTED_DEVICE is gone after Linux 5.15. Drop it's usage on
newer kernels to fix compilation with Linux 5.15.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2022-10-22 19:44:45 +02:00
Martin Blumenstingl
f4ce7df4fc kernel: ltq-vdsl-vr9-mei: Fix compilation with Linux 5.15
The result of copy_to_user() now has to be checked explicitly. Also
MODULE_SUPPORTED_DEVICE is gone after Linux 5.10.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2022-10-22 19:44:45 +02:00
Martin Blumenstingl
22fbc2d896 kernel: ltq-tapi: Fix compilation with Linux 5.15
MODULE_SUPPORTED_DEVICE was removed after Linux 5.10. Drop it from the
driver as well.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2022-10-22 19:44:45 +02:00
Martin Blumenstingl
d6e506eaaa kernel: ltq-deu: Fix compilation with Linux 5.15
struct of_device_id is not implicitly included anymore. Include
<linux/mod_devicetable.h> to fix compilation on Linux 5.15.
Also upstream commit a24d22b225ce15 ("crypto: sha - split sha.h into
sha1.h and sha2.h") from Linux 5.11 moves functionality from sha.h to
sha1.h.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2022-10-22 19:44:45 +02:00
Jan Hoffmann
e4c76e6fa3 ltq-ifxos: add compatibility with kernel 5.15
set_fs is no longer supported since kernel 5.13 for mips.

Signed-off-by: Jan Hoffmann <jan@3e8.eu>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2022-10-22 19:44:45 +02:00
Hauke Mehrtens
b9b0407901 kernel: x86: Add glue_helper.ko only on kernel < 5.12
This module was removed with kernel 5.12.
This fixes the build of the x86 target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-10-22 02:31:57 +02:00
Daniel Golle
e57ca876cc
kernel: modules: iio: create and use AddDepends
Just like for other subsystems, create a reusable AddDepends call.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2022-10-19 23:20:42 +01:00
Nick Hainke
0ecb971a6f kernel: test for kernel version greater 5.13 to fix mmc-spi
The of_mmc_spi.o resource is provider agnostic in kernels greater 5.13
and does not depend anymore on CONFIG_OF [0].

[0] - edd6021465

Suggested-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Nick Hainke <vincent@systemli.org>
2022-10-19 21:40:23 +02:00
Rafał Miłecki
ad0731cc65 kernel: disable kmod-fs-ntfs3 for Linux 5.10
This new NTFS driver was added in kernel 5.15. Avoid building empty
package for kernel 5.10.

Fixes: bd0db6017b ("kernel: 5.15: add new module")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2022-10-19 07:07:14 +02:00
Hauke Mehrtens
63460a5ba2 rtl8812au-ct: Fix compile
Replace the extern inline with a static inline. With extern inline the
compiler will generate the function in all compile units including this
file which breaks linking later.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2022-10-18 15:09:23 +02:00
Felix Fietkau
a7ca1b2314 mac80211: use board.json provided phy names in generated default config
The phy will be automatically renamed on setup

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-14 13:13:11 +02:00
Felix Fietkau
50a03decdf mac80211: change the default config for a renamed wiphy
use option phy to reference the device instead of path/macaddr

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-14 13:13:01 +02:00
Felix Fietkau
db9c4a066a mac80211: fix detecting highest radio* config section index
Deal with gaps by iterating over existing sections instead of counting

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-14 13:12:49 +02:00
Felix Fietkau
4d323303e7 mac80211: rename phy according to board.json entries on bringup
This allows phy names specified in board.json to be used directly instead of
the path option

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-14 13:12:42 +02:00
Felix Fietkau
6603748e0c mac80211: change default ifname to <phy>-<type><index>
This makes it clear, which phy a wlan device belongs to and also helps with
telling them apart by including the mode in the ifname.
Preparation for automatically renaming PHYs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-14 13:12:36 +02:00
Felix Fietkau
da6b77215b mac80211: fix typo in netifd script
Reported-by: Chad Monroe <chad.monroe@smartrg.com>
Fixes: 590eaaeed5 ("mac80211: fix issues in HE capabilities")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-13 21:50:34 +02:00
Felix Fietkau
88803cb0e6 mac80211: add patch that gives the driver more control over netdev offloads
This can be used to selectively disable checksum, SG or GSO offloads

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-13 15:04:33 +02:00
Felix Fietkau
26f400210d mac80211: backport security fixes
This mainly affects scanning and beacon parsing, especially with MBSSID enabled

Fixes: CVE-2022-41674
Fixes: CVE-2022-42719
Fixes: CVE-2022-42720
Fixes: CVE-2022-42721
Fixes: CVE-2022-42722
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-13 15:00:59 +02:00
Felix Fietkau
590eaaeed5 mac80211: fix issues in HE capabilities
Enable HE SU beamformee by default
Fix spatial reuse configuration:
- he_spr_sr_control is not a bool for enabling, it contains multiple bits
  which disable features that should be disabled by default
- one of the features (PSR) can be enabled through he_spr_psr_enabled
- add option to disable bss color / spatial reuse

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-13 13:45:42 +02:00
Felix Fietkau
f6c359a655 mac80211: sync rx STP fix with updated version
Add back skb length check and fix a minor issue in protocol detection

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2022-10-07 14:59:11 +02:00