Commit Graph

34519 Commits

Author SHA1 Message Date
Luka Perkov
8258f8edb6 ar71xx: cosmetic fix of alfa ap120c/ap96 ordering
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49086
2016-03-24 21:09:34 +00:00
Luka Perkov
35e7bfb906 uboot-envtools: add support for ap120c
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49083
2016-03-23 22:31:41 +00:00
Luka Perkov
ebaba15331 ar71xx: add support for ap120c
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49082
2016-03-23 22:31:38 +00:00
John Crispin
98a01048b8 ar71xx: migrate tplink cpe510 to new build steps
cpe510: Tested sysupgrade and initramfs.
Untested: webIf w/ factory.bin & recovery.bin

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49081
2016-03-23 12:52:50 +00:00
John Crispin
e0a3a84521 ar71xx/image: allow builds of loader without cmdline injecting
On most platforms the cmdline is supplied by the loader to the kernel.
When using an elf loader with cmdline the size is bloated by 512k.
For loader-elf platforms like the cpe510 better use loader-elf but patch
the cmdline into the kernel.

wdr1043: Tested loader still works using sysupgade image.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49080
2016-03-23 12:52:47 +00:00
John Crispin
5bac8f0fd4 ar71xx/image: introduce LOADER_TYPE to support elf loaders
The loader decompress a lzma compressed kernel. Some bootloaders
only support elf files like the tplink cpe510

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49079
2016-03-23 12:52:44 +00:00
John Crispin
a8bf92457d uboot-zynq: Update to U-Boot 2016.03 release
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49078
2016-03-23 12:52:41 +00:00
John Crispin
7f64d9a0cb zynq: Simplify boot-img build
by adding Device/DefaultConfig macro to define the dts and device in
lower case.

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49077
2016-03-23 12:52:38 +00:00
John Crispin
5b2d89f060 ar71xx: WNR1000v2: enable control of all LEDs and buttons
This patch provides full GPIO support for WNR1000v2 (LEDs and buttons).
It exposes all LEDs to operating system, including Ethernet ones.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 49076
2016-03-23 12:52:35 +00:00
John Crispin
9213fefb4d ar71xx: Add QCA955X GPIO mux and function definitions
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49075
2016-03-23 12:52:31 +00:00
John Crispin
0afb47718e ar71xx: Add support for ath79_gpio_function_* on QCA955X
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49074
2016-03-23 12:52:27 +00:00
John Crispin
63a9c61fb6 mac80211: build airo on x86 only
airo requires ISA_DMA_API and
that symbol is only set on some ppc,malta,x86
x86 is probably only platform where that driver is used

fixes buildbot errors on ar71xx,lantiq ...:
airo.ko is missing

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 49073
2016-03-23 12:52:24 +00:00
John Crispin
58143e9b65 Revert "ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg"
Not all mach-* files set all boards correctly in ETH_CFG. They depend on
some preset values by u-boot which were not previously modified by
ath79_setup_qca955x_eth_cfg. Avoiding to modify them in this function keeps
it backward compatible for these boards.

This reverts commit 119b8ab2c2eac237ec4e9c4d0ed53df22b5c6978.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49072
2016-03-23 12:52:20 +00:00
John Crispin
b269a3520d Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x"
The default delays RXD 3. RDV 3, TXD 0, TXE 0 doesn't seem to work for some
boards. These boards depend on the preset values of u-boot which may
differ.

This reverts commit f2d4bb96b62512caa161dcc2867c91692fb16a38.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49071
2016-03-23 12:52:17 +00:00
John Crispin
26d18d4e07 ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR1750
The MR1750 must unset some bits in ETH_CFG which were set by u-boot to work
correctly under OpenWrt. But the global function
ath79_setup_qca955x_eth_cfg will not unset all of them to increase the
backward compatiblity with older mach-* files. A private (simplified)
version for MR1750 can be used instead.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49070
2016-03-23 12:52:12 +00:00
John Crispin
bdf76faa3e ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR900
The MR900 must unset some bits in ETH_CFG which were set by u-boot to work
correctly under OpenWrt. But the global function
ath79_setup_qca955x_eth_cfg will not unset all of them to increase the
backward compatiblity with older mach-* files. A private (simplified)
version for MR900 can be used instead.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49069
2016-03-23 12:52:09 +00:00
John Crispin
28b6e5e225 oxnas: set ubifs parameters for Default profile
Work-around obsolete mkfs/ubifs code.
Unlike squashfs, ubifs images should be generated per-device so
minimum I/O unit size, logical erase block size, maximum logical erase
block count can be defined for the specific flash-chips parameters.
Also, generating ubinized images is unrelated to rootfs being ubifs or
squashfs, but rather depends on the device supporting UBI or not.
In the meantime and in order to fix an error which currently causes the
image generation on buildbot to fail, work-around by defining
UBIFS_OPTS for the Default profile.
See also
http://buildbot.openwrt.org:8010/builders/oxnas/builds/246/steps/compile_8/logs/stdio

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49068
2016-03-23 12:52:05 +00:00
John Crispin
dd70bcc089 mediatek: patch block2mtd to allow cmdlineparts to work
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 49067
2016-03-23 11:12:34 +00:00
John Crispin
30d3a8c512 mediatek: update patches
fixes trgmii on old eco and adds nand support

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 49066
2016-03-22 21:14:51 +00:00
John Crispin
1898144b5f mt76: fix compile error
gcc complained about uninitialized variables

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 49065
2016-03-21 20:42:56 +00:00
John Crispin
5d2f529c9b mediatek: bump to v4.4
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 49064
2016-03-21 20:42:51 +00:00
Gabor Juhos
c8a6c583fc generic/4.4: remove ISSI SI25CD512 SPI flash support patch
The flash is already supported in mainline kernel since 4.3-rc1.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49063
2016-03-21 14:18:53 +00:00
Gabor Juhos
fc5c19f45b ramips: lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the
caller function must reserve stack space for $a0-$a3
registers in case the callee needs to save its arguments.

The assembly startup code does not reserve stack space
for these registers thus when the main C function needs
to save its arguments, that will cause a stack overflow.

Fix the assembly code to reserve stack space for the
registers to avoid that.

Untested. It seems that the lzma-loader is not used at all?

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49062
2016-03-21 13:15:29 +00:00
Gabor Juhos
4d0681d865 lantiq: lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the
caller function must reserve stack space for $a0-$a3
registers in case the callee needs to save its arguments.

The assembly startup code does not reserve stack space
for these registers thus when the main C function needs
to save its arguments, that will cause a stack overflow.

Fix the assembly code to reserve stack space for the
registers to avoid that.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49061
2016-03-21 13:15:25 +00:00
Gabor Juhos
395fff6f8b brcm47xx: lzma-loader: fix cache invalidation
The current code only partially invalidates both caches
because the cache size and cache-line size values are
incorrectly passed to the C code.

Fix the assembly code to pass the arguments in the correct
order.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49060
2016-03-21 13:15:22 +00:00
Gabor Juhos
f8933cbd5f brcm47xx: lzma-loader: remove trailing whitespaces from head.S
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49059
2016-03-21 13:15:21 +00:00
Gabor Juhos
7d8d26272b adm5120: lzma-loader: fix cache invalidation
The current code only partially invalidates both caches
because the cache size and cache-line size values are
incorrectly passed to the C code.

Fix the assembly code to pass the arguments in the correct
order.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49058
2016-03-21 13:15:16 +00:00
Gabor Juhos
ae8f6f1a28 adm5120: lzma-loader: remove trailing whitespaces from head.S
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49057
2016-03-21 13:15:13 +00:00
Gabor Juhos
8cd8698b6f generic: lzma-loader: fix cache invalidation
The current code only partially invalidates both caches
because the cache size and cache-line size values are
incorrectly passed to the C code.

Fix the assembly code to pass the arguments in the correct
order.

Tested on RB532.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49056
2016-03-21 13:15:09 +00:00
Gabor Juhos
479a0ef957 generic: lzma-loader: remove trailing whitespaces from start.S
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49055
2016-03-21 13:15:05 +00:00
blogic
ac7858a0f3 odhcp6c : Silence mtu write error warnings
Silence warning "daemon.notice netifd: wan6 (1139): sh: write error: Invalid argument"
when an invalid MTU is received via RA as kernel refuses to accept IPv6 mtu values
which are smaller than 1280 and bigger than the device mtu.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

git-svn-id: svn+ssh://svn.openwrt.org/openwrt/trunk@49054 3c298f89-4303-0410-b956-a3cf2f4a3e73
2016-03-20 18:48:59 +00:00
John Crispin
1cdd3403ba ar71xx: WNR1000v2: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR1000v2. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses. This is the same fix as for WNR2000v3
and WNR612v2.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 49051
2016-03-20 14:41:58 +00:00
John Crispin
d6d0597cdf lantiq: use upstream mechanism to append device tree file
Instead of using our patch-dtb program just place the device tree
behind the kernel binary and then let the in kernel mechanism fetch it.
This also adds support for having the device tree file in the boot
loader.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49050
2016-03-20 14:41:54 +00:00
John Crispin
217a643755 wireless: remove rtl8188eu (staging)
- depends on CFG80211 (upstream: 9da4aa48d04bbdbae3c959809e14da2bf0c53f61)
in os_dep/mon.c

This removes rtl8188eu completely from OpenWrt
since mac80211/compat-wireless/backports does not
provide staging wireless drivers

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 49049
2016-03-20 14:41:49 +00:00
John Crispin
f8b22d2b77 wireless: add vendor dirs
Kernel 4.5 changes wireless driver organisation

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 49048
2016-03-20 14:41:44 +00:00
John Crispin
b5bd41edcd mac80211: add cisco airo
airo depends on cfg80211, move it to mac80211

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 49047
2016-03-20 14:41:41 +00:00
John Crispin
7861462ade wireless: remove cisco airo
it depends on cfg80211
cfg80211 & wext drivers don't mix on OpenWrt

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 49046
2016-03-20 14:41:37 +00:00
John Crispin
cc82da0bc1 ramips: MiWifi-Nano - change gpios to leds, add to default build group
1) Use leds to indicate:
Red - Power
Amber - Radio On
Blue - Wifi associated
2) Add profile to default build group for MT7628 subtarget

Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

SVN-Revision: 49045
2016-03-20 14:41:33 +00:00
John Crispin
e9db6eb8b2 oxnas: sync cpu-hotplug with mach-realview
Make mach-oxnas/hotplug.c look more similar to mach-realview/hotplug.c,
just cosmetics and maintainability concerns, no functional changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49044
2016-03-20 14:41:29 +00:00
John Crispin
b64f159bc8 oxnas: add spinlock in pinctrl driver
Try to address a race-condition in pinctrl-oxnas.c

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49043
2016-03-20 14:41:25 +00:00
John Crispin
daf7ab04ba oxnas: also reset GPIO B registers on boot
Clear both, SYS_CTRL_*_SEL and SEC_CTRL_*_SEL on boot instead of
writing to SYS_CTRL_*_SEL twice which looks like a copy-paste error.
Thanks to anonymous to bring this up in #21892!

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49042
2016-03-20 14:41:21 +00:00
John Crispin
174bc392ff oxnas: switch to new image generation template
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49041
2016-03-20 14:41:17 +00:00
John Crispin
3cea0747d6 oxnas: add Default profile and reorganize device profiles
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49040
2016-03-20 14:41:13 +00:00
John Crispin
4fe3fda78a include/image.mk: allow including U-Boot environment in UBI
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49039
2016-03-20 14:41:06 +00:00
Hauke Mehrtens
04f33f7349 linux-firmware: fix rt73-usb-firmware package
Some parts of this package were named rt73-pci-firmware before which
looks like a copy and past error. This renames all parts to rt73-usb-
firmware and then the firmware gets build and the dependencies from the
package with the kernel module are also working correctly.

This fixes #22069

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49037
2016-03-19 11:00:09 +00:00
Hauke Mehrtens
fcbc97ad78 kernel: update kernel 4.1 to version 4.1.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49035
2016-03-18 23:41:21 +00:00
Hauke Mehrtens
6d933987db mac80211: libertas-spi: deactivate for UML target
The UML target does not have spi support.
This fixes a build problem found by the build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49034
2016-03-17 23:09:20 +00:00
Hauke Mehrtens
7ed9ee6f30 kernel: add missing kernel options
This was found by the build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49033
2016-03-17 22:36:27 +00:00
Hauke Mehrtens
b3aae4c672 kernel: update kernel 4.4 to version 4.4.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49032
2016-03-17 21:41:07 +00:00
John Crispin
4d6c4994fc ar71xx: Use PHY fixups for Open Mesh MR1750
The delays of PHY/MAC on the MR1750 are done by u-boot and OpenWrt in
different ways. u-boot only modifies the ETH_CFG of the QCA955x based on
the link speed. But OpenWrt can only modify the PHY delays based on the
link speed.

This can lead to communication problems when u-boot initializes the ETH_CFG
for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY
delays to an incompatible value.

Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and
only rely on the AT803x PHY settings.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49031
2016-03-16 09:27:14 +00:00