Commit Graph

13 Commits

Author SHA1 Message Date
Claudiu Beznea
3e53eec589 at91: add support for sama7g5-ek board
Add support for SAMA7G5-EK board.
Hardware:
- SoC: SAMA7G5
- RAM: Aliance Memory AS4C256M16D3LC (4 Gbit DDR3L)
- SD/MMC: 1 standard 4bit SD Card interface
- USB: 1 Micro-AB host/device, 1 Type-A host, 1 Type-C host
- CAN: 2 interfaces
- Ethernet: 10/100 port, 1Gbps port
- Wi-Fi/BT: 1 optional interface
- Audio: 1 SPDIF RX port, 1 SPDIF TX port, 4 digital microphones
- Camera: 1 RPi CSI camera interface
- Debug: 1 J-Link-OB + CDC, 1 JTAG
- LEDs: 1 RGB
- Buttons: 4 push buttons
- Expansions: 1 RPi Expansion connector, 2 mikroBUS connectors
- Power management: 1 power management IC, 1 power consumption
  measurement device

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-02-24 19:05:29 +01:00
Paul Spooren
daae59b729 at91: drop /etc/config/firewall
The file can't be part of base files or the base-files and firewall
packages collide. Two packages must not provide the same config files
without having a defined CONFLICT since it would result in an
undeterministic config state depending on what package is installed
last.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2022-01-15 16:36:28 +01:00
Adrian Schmutzler
85b1f4d8ca treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.

Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.

Note:

This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 11:30:06 +01:00
Adrian Schmutzler
7f1540cc46 at91: introduce vendor_model scheme and drop board names
This introduces the vendor_model scheme to this target in order to
harmonize device names within the target and with the rest of
OpenWrt. In addition, custom board names are dropped in favor
of the generic script which takes the compatible.

Use the SUPPORTED_DEVICES variable to store the compatible where it
deviates from the device name, so we can use it in build recipes.

While at it, harmonize a few indents as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-25 19:28:42 +02:00
Mathias Kresin
f12a32630f treewide: use the generic board_name function
Use the generic function instead ot the target specific ones.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich
08848936dd all: remove redundant board.d/00_model files
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
2015-12-04 11:07:06 +00:00
Jo-Philipp Wich
81f1ccbf96 at91: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47740
2015-12-03 23:07:38 +00:00
Florian Fainelli
ad576d262d at91: add Device Tree based board detection
Set up eth0 as LAN interface by default.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 46174
2015-07-04 01:25:15 +00:00
Hauke Mehrtens
f4cd36d825 at91: fix typo in network file
This closes #14474.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38842
2013-11-17 17:14:32 +00:00
Claudio Mignanti
ba56a699a9 add defautl config for eth0
SVN-Revision: 22128
2010-07-11 12:27:05 +00:00
Claudio Mignanti
4bb7ab3057 revamp target: add support for netusg20 board
SVN-Revision: 21838
2010-06-18 22:12:33 +00:00
Gabor Juhos
438dfe5c6f get rid of per-profile base-files
SVN-Revision: 9069
2007-09-29 14:27:54 +00:00