Commit Graph

1250 Commits

Author SHA1 Message Date
INAGAKI Hiroshi
7e9b93fb1b base-files: allow non-standard rootfs volume name in UBI in sysupgrade
This commit allows to use non-standard UBI volume name as the rootfs
volume in sysupgrade.

ex.:
  The U-Boot on Buffalo WXR-2533DHP checks existence and checksum of
  "ubi_rootfs" volume when booting, so this name is required.

OpenWrt currently provides several patches:

490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
491-ubi-auto-create-ubiblock-device-for-rootfs.patch
492-try-auto-mounting-ubi0-rootfs-in-init-do_mounts.c.patch

to facilitate ubi rootfs automount. However the upstream kernel
also supports the means of booting from a fully custom ubi
partition name and ubi volume name via bootargs/kernel's cmdline
parameters:

ubi.mtd=mtd_partition_name
ubi.block=rootfs_volume_name
root=/dev/ubiblock$X_$Y

For more information and examples visit the wiki over at linux-mtd:
<http://www.linux-mtd.infradead.org/faq/ubifs.html>
<http://www.linux-mtd.infradead.org/doc/ubi.html>

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
2019-01-01 16:38:20 +01:00
Tony Ambardar
10a2ccb7fc base-files: install missing /etc/iproute2/ematch_map
This file is needed to properly use the tc ematch modules present in
kmod-sched-core and kmod-sched. It is a read-only index file of ematch
methods used only by tc.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2018-12-19 07:33:35 +01:00
Hauke Mehrtens
201058b35c base-files: Fix netdev led trigger
In the upstream netdev led trigger the one mode file was replaced by 3
files named rx, tx and link. Fix the netdev trigger configuration code
to use the modified API.

Fixes: aa3b6a08c5 ("kernel: Replace ledtrig-netdev with upstream backport")
Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-12-16 20:11:44 +01:00
Luiz Angelo Daros de Luca
5cb1dce542 base-files: add sysupgrade -k to save list of pkgs
When '-k' is used, sysupgrade inserts into backup a new file
/etc/backup/installed_packages.txt which contains pkgname and origin (rom,
overlay, unknown) without touching rootfs.

It's mainly used to reinstall all extra packages:

 # opkg update
 # grep "\toverlay" /etc/backup/installed_packages.txt | cut -f1 | xargs -r opkg install
 # rm /etc/backup/installed_packages.txt

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2018-12-09 18:04:11 +00:00
Luiz Angelo Daros de Luca
96392e5da4 base-files: add sysupgrade -o to save all overlay files
Add sysupgrade '-o' option in order to include all overlay files in
backup, except for those that are from packages but including files
listed in conffiles, sysupgrade.conf or /lib/upgrade/keep.d.

With '-u' option, it will skip files equals to /rom and conffiles that
were not changed.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2018-12-09 18:04:11 +00:00
Luiz Angelo Daros de Luca
20b23270b7 base-files: add sysupgrade -u to skip unchanged files
With '-u', for a file /aaa/bbb/ccc enlisted for backup,
it will only get into backup if /rom/aaa/bbb/ccc does not
exist or /aaa/bbb/ccc is different from /rom/aaa/bbb/ccc.

It also works with '-c', but only effective for files touched
but not modified.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2018-12-09 18:04:11 +00:00
Luiz Angelo Daros de Luca
e8711daede base-files: minor cleanups on sysupgrade
Renamed add_uci_conffiles to add_conffiles as it includes
any conffiles listed, not only UCI ones.

Make do_save_conffiles arg mandatory

Allow other options after -l (like -c)

Do not use stdout for error messages (fixes backup to stdout)

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2018-12-09 18:04:11 +00:00
Petr Štetiar
60dd181a76 base-files: diag.sh: Make it more generic towards DTS so it could be reused
I wanted to add status LEDs support to my imx6 based board and have
found out, that I could use diag.sh script found in ramips platform,
which seems to be also shared in a few other platforms:

 4801276bc2078c5bcf03003c831e3b0a target/linux/ramips/base-files/etc/diag.sh
 4801276bc2078c5bcf03003c831e3b0a target/linux/ipq40xx/base-files/etc/diag.sh
 4801276bc2078c5bcf03003c831e3b0a target/linux/ath79/base-files/etc/diag.sh

So I've extended the base diag.sh in a way, that if it detects any of
the DTS LED aliases, then it would use the generic DTS set_led_state
code.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-12-06 08:42:40 +01:00
Michael Heimpold
d6ac8ca76c base-files: fix several bashisms
For equality test a simple = is sufficient, the == is
usually disregarded as bashism.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
2018-12-05 22:16:52 +01:00
Jo-Philipp Wich
9808bd2799 Revert "base-files: fwtool: Fix wrong checksum on combined-image with metadata"
This reverts commit 41770add03.

The fwtool_check_image() procedure is used by `sysupgrade --test` which must
not alter the image under test in any way.

Currently, when the LuCI ui or any other sysupgrade wrapper first invokes
sysupgrade --test to verify the compatibility of the image and then calculates
the sha256sum over it, the resulting checksum will differ from the original
image since the test invocation will implicitely strip the metadata trailer.

To properly fix the underlying issue, the combined image checksumming code
must be modified to skip the metadata trailer.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-12-02 16:05:44 +01:00
Tony Ambardar
8806da86f5 base-files: fix prerm return value, align with postinst code
The return value of a package prerm script is discarded and not returned
correctly by default_prerm(). This allows other operations like service
shutdown to "leak" their return value, prompting workarounds like commit
48cfc826 which do not address the root cause.

Preserve a package prerm script return value for use by default_prerm(),
sharing the corresponding code from default_postinst() for consistency.
Also use consistent code for handling of /etc/init.d/ scripts.

Run Tested on: LEDE 17.01.4 running ar71xx.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2018-11-29 11:52:56 +01:00
Petr Štetiar
41770add03 base-files: fwtool: Fix wrong checksum on combined-image with metadata
If I create following image:

define Device/engenius-m36
  IMAGE/sysupgrade.bin := combined-image | append-metadata
endef

Sysupgrade then errors out:

  Invalid image. Contents do not match checksum (image:cd285595eaf297370404ae0e2815ec1a calculated:2cf9a2286fb6b01af3ea189128017d44)
  Image check 'platform_check_image' failed.

By removing the metadata from the image I get combined-image checksum
working again and sysupgrade works.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-26 12:05:45 +01:00
Petr Štetiar
7c104a8358 base-files: sysupgrade: Allow downloading of firmware images using HTTPS
Currently it's only possible to download images over HTTP.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2018-11-25 19:26:50 +01:00
Linus Kardell
2ac1a57677 base-files: fix unkillable processes after restart
When restart is run on an init script, the script traps SIGTERM. This is
done as a workaround for scripts named the same name as the program they
start. In that case, the init script process will have the same name as
the program process, and so when the init script runs killall, it will
kill itself. So SIGTERM is trapped to make the init script unkillable.

However, the trap is retained when the init script runs start, and thus
processes started by restart will not respond to SIGTERM, and will thus
be unkillable unless you use SIGKILL. This fixes that by removing the
trap before running start.

Signed-off-by: Linus Kardell <linus@telliq.com>
2018-11-22 13:15:10 +01:00
Christian Lamparter
641dc50164 base-files: make it possible to specify switch led mode
The swconfig switch led driver has the ability to switch
between a "link, rx and/or tx" mode. However, this feature
was not implemented in uci, the led init script and
config_generate.

This patch adds a seventh parameter to the
ucidef_set_led_switch() function. The accepted values for
this parameter are: link, rx and tx.
Any permutations of these three values are supported, as
long as they are properly encased with quotes.
If the parameter is not specified it will default to "all"
(link rx tx).

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2018-09-29 17:23:11 +02:00
Florian Eckert
61a5994900 base-files: add network_get_metric() to /lib/functions/network.sh
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2018-09-25 10:16:03 +02:00
Tony Ambardar
4097ab6a97 base-files: fix postinstall uci-defaults removal
Commit 7f694582 introduced a bug where default_postinst() often fails to
remove a uci-defaults script after application, leaving it to run again
after a reboot.
(Note: commit 7f694582 also introduced FS#1021, now fixed by 73c745f6)

The subtle problem arises from the shell logical chain:
[ -f "$i" ] && . "$i" && rm -f "$i"

Most uci-defaults scripts contain a terminal 'exit 0' statement which,
when sourced, results in the logic chain exiting before executing 'rm -f'.
This was observed while testing upgrades of 'luci-app-sqm'.

The solution is to wrap the shell sourcing in a subshell relative to the
command 'rm -f':
( [ -f "$i" ] && . "$i" ) && rm -f "$i"

Revert to using 'grep' to prefilter the list of entries from the control
file, which yields the full path of uci-defaults scripts. This allows
keeping the existence check, directory change and script sourcing inside
the subshell, with the script removal correctly outside.

This approach avoids adding a second subshell only around the "." (source)
command. The change also preserves the fix FS#1021, since the full path is
used to source the script, which is POSIX-portable irrespective of PATH
variable or reference to the CWD.

Run Tested on: LEDE 17.01.4 running ar71xx, while tracing installation of
package luci-app-sqm with its associated /etc/uci-defaults/luci-sqm file.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
2018-09-24 18:58:00 +02:00
Andy Walsh
4549ab46a8 base-files: /etc/services: add missing 'rpcbind' alias
* add missing 'rpcbind' alias to /etc/services

Allows rpcbind to open its 111 port and be reachable via lan, this is the default behaviour.

Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
2018-09-10 10:44:03 +02:00
Paul Wassi
1bd6b91e0f base-files: provide more tolerant xterm detection
Set the window title not only in "xterm", but also in
e.g. "xterm-256color", "xterm-color", etc.
The case statement is taken from Debian / Ubuntu.

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2018-08-29 08:33:54 +02:00
Luiz Angelo Daros de Luca
d810d44e5a base-files: create /etc/ethers by default
/etc/ethers is missing on /rom but always created when dnsmasq
runs. It is better to have it in place and avoid an extra change
in flash after firstboot.

It will generate an extra /etc/ethers-opkg when it has changed.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2018-08-21 15:55:00 +02:00
Mathias Kresin
56b8ac1e86 treewide: consolidate upgrade state set
Set the (sys)upgrade state when sourcing the stage2 script instead of
setting the state for each target individual.

This change fixes the, due to a missing state set, not working upgrade
led on ath79 and apm821xx.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-16 21:20:57 +02:00
Mathias Kresin
dfee452713 base-files: add function to get mac as text from flash
Add a function to get a mac stored as text from flash. The octets of
the mac address need to be separated by any separator supported by
macaddr_canonicalize().

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-11 21:36:27 +02:00
Mathias Kresin
ec28d2797c base-files: use consistent coding style
Add the opening bracket right after the function name, to do it the
same way for all functions in this file.

Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-11 21:36:27 +02:00
Thibaut VARÈNE
78b5764fd8 base-files: make wifi report unknown command
Avoid having /sbin/wifi silently ignore unknown keywords and execute
"up"; instead display the help message and exit with an error.

Spell out the "up" keyword (which has users), add it to usage output,
and preserve the implicit assumption that runing /sbin/wifi without
argument performs "up".

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2018-08-10 05:30:57 +02:00
Daniel Golle
8174853c78 base-files: introduce sysupgrade signature chain verification
Verify ucert signature chains in sysupgrade images in case ucert is
installed and $CHECK_IMAGE_SIGNARURE = 1.
Also make sure ucert host binary is present and generate a self-signed
ucert in case $TOPDIR/key-build.ucert is missing.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-08-08 02:22:54 +02:00
Rosy Song
2b637e5ab8 base-files: do not add relevant sections & options except when ipv6 is support in kernel
Signed-off-by: Rosy Song <rosysong@rosinson.com>
2018-08-06 12:08:47 +02:00
Andreas Ziegler
72489ebeb6 base-files: sysupgrade: abort if config backup fails
Sysupgrade shouldn't proceed, if the backup of the configuration
fails because tar (or gzip) exit with a non-zero code.

Signed-off-by: Andreas Ziegler <dev@andreas-ziegler.de>
2018-08-06 06:51:44 +02:00
John Crispin
5e1b4c57de base-files: drop fwtool_pre_upgrade
this feature has never worked, the fw image name was not passed and the -t
parameter was missing in the tool invocation. drop the feature.

Signed-off-by: John Crispin <john@phrozen.org>
2018-07-30 17:42:39 +02:00
Luiz Angelo Daros de Luca
4c42887286 base-files: fix wrong sysctl parameter order
Restarting service sysctl echos multiple errors like:

  sysctl: -e: No such file or directory

After the first filename, all remaining arguments are treated
as files.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2018-07-18 19:17:46 +02:00
Jo-Philipp Wich
1bad852ff5 base-files: network.sh: gracefully handle missing network.interface ubus ns
When attempting to use any of the functions in network.sh while netifd is
not started yet, the ubus interface dump query will fail with "Not found",
yielding an empty response.

Subsequently, jsonfilter is invoked with an empty string instead of a valid
JSON document, causing it to emit a second "unexpected end of data" error.

This caused the dnsmasq init script to log the following errors during
early boot on some systems:

    procd: /etc/rc.d/S19dnsmasq: Command failed: Not found.
    procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data.

Fix the issue by allowing the ubus query to fail with "Not found" but still
logging other failures, and by passing an empty JSON object to jsonfilter
if the interface status cache is empty.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-07-17 08:10:20 +02:00
Matthias Schiffer
16035a7dd3
include/feeds.mk: rework generation of opkg distfeeds.conf
Allow enabling/commenting/disabling each feed individually by using a
tristate config symbol.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:18:41 +02:00
Matthias Schiffer
6dac434c00
base-files: fix feed list in PKG_CONFIG_DEPENDS
FEEDS_ENABLED and FEEDS_DISABLED are derived from FEEDS_AVAILABLE, not
FEEDS_INSTALLED.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-07-12 21:18:41 +02:00
Kevin Darbyshire-Bryant
edf338f248 basefiles: Reword sysupgrade message
sysupgrade 'upgrade' message more verbose than needs be.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2018-07-08 09:41:53 +01:00
Mathias Kresin
52a9edb1bf base-files: add menuconfig option for HOME_URL
Add a menuconfig option to set the HOME_URL exposed in
/usr/lib/os-release independent from the
LEDE_DEVICE_MANUFACTURER_URL.

Fixes: FS#1123

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-06-27 08:40:34 +02:00
Sven Roederer
2314c2c6f2 base-files: fix links in banner.failsafe
Update the link to the current section in the documentaion wiki.
This fixes https://github.com/openwrt/packages/issues/6282

Signed-off-by: Sven Roederer <freifunk@it-solutions.geroedel.de>
2018-06-18 07:10:15 +02:00
Rafał Miłecki
5b2e20807d base-files: exit if mtd write command fails during sysupgrade
It avoids confusing situations like:
> Could not get image magic
> Image check failed.
> Upgrade completed
> Rebooting system...

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2018-06-18 06:37:28 +02:00
Matthias Schiffer
3b6f865b01
base-files: sysupgrade: fix handing get_image unpack commands
On bcm53xx and brcm47xx, commands are passed to default_do_upgrade that
expect the image to be passed on stdin, rather than as an argument.

Fixes: 30f61a34b4 ("base-files: always use staged sysupgrade")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-06-11 19:25:40 +02:00
Tony Ambardar
73d8a6ab76 base-files: fix UCI config parsing and callback handling
There are several long-standing issues present in the UCI shell API as
documented in https://wiki.openwrt.org/doc/devel/config-scripting. They
relate both to high-level, user-defined callback functions used to
process UCI config files, and also to low-level functions used within
scripts generally.

The related problems have been encountered now and in the past, e.g.
https://forum.openwrt.org/viewtopic.php?id=54295, and include:

a) UCI parsing option() function and user-defined option_cb() callbacks
being erroneously called during processing of "list" config file entries;

b) normal usage of the low-level config_set() unexpectedy calling any
defined option_cb() if present; and

c) handling of the list_cb() not respecting the NO_CALLBACK variable.

Root causes include a function stack "inversion", where the low-level
config_set() function incorrectly calls the high-level option() function,
intended only for processing the "option" keyword of UCI config files.

This change addresses the inversion and other issues, making the option
handling code more consistent and smaller, and simplifying developers'
usage of UCI callbacks.

Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
2018-06-06 15:00:08 +02:00
Jo-Philipp Wich
7e664b7c2d base-files: fix ucidef_set_interface() protocol selection
The previous refactoring of ucidef_set_interface() removed the protocol
selection heuristic which breaks the networking defaults for the majority
of boards.

Re-add the protocol selection and rename two bad "proto" references to
the expected "protocol" value.

Fixes: 85048a9c1f ("base-files: rework _ucidef_set_interface to be more generic")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-05-25 07:48:25 +02:00
Roman Yeryomin
85048a9c1f base-files: rework _ucidef_set_interface to be more generic
This is a rework of previously submitted patch reworking
ucidef_set_interface_raw [1]. Here, keep the idea but instead
make _ucidef_set_interface more generic and use it instead of
ucidef_set_interface_raw.
Also change the users like ucidef_set_interface_lan and others.

[1] https://patchwork.ozlabs.org/patch/844961/

Signed-off-by: Roman Yeryomin <roman@advem.lv>
2018-05-24 09:39:47 +02:00
Jo-Philipp Wich
01329877bc base-files: depend on openwrt-keyring
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2018-05-20 19:39:12 +02:00
Rosen Penev
20e5fefb0c sysctl: Protect hard/symlinks by default.
There is no usecase for not protecting symlinks that I know of in OpenWrt.
Not even on desktop systems where you have multiple users with a shell.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-05-01 11:19:03 +02:00
Matthias Schiffer
bb46520159
kernel: disable accept_ra by default
Our commands setting accept_ra to 0 on all interfaces got lost in the
transition to procd. This remained unnoticed for a long time, as we also
enable forwarding on all interfaces, which prevents RA handling by default.

Restore the commands, while also fixing a possible race condition in the
old version.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-04-17 22:08:12 +02:00
Matthias Schiffer
14c78a7dfc
base-files: /lib/functions.sh: remove unused insert_modules
insert_modules has been unused since r5279.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-04-17 11:32:56 +02:00
Matthias Schiffer
d13c7acd9e
base-files: remove /etc/sysctl.d/ from conffiles
Let's use /etc/sysctl.d for package-provided snippets and leave
/etc/sysctl.conf to the admin. Don't backup /etc/sysctl.d on upgrades, so
old defaults get replaced properly.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-04-13 14:36:43 +02:00
Matthias Schiffer
445682c07d
base-files: move netfilter sysctl defaults to specific kmod packages
Avoid warnings when applying settings for uninstalled kmods. See also
FS#1073.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-04-13 10:16:45 +02:00
Matthias Schiffer
bee696d66c
base-files: move sysctl defaults to /etc/sysctl.d/10-default.conf
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-04-13 10:16:45 +02:00
Matthias Schiffer
dbeb780ba4
base-files: evaluate /etc/sysctl.d/* before /etc/sysctl.conf
We can use /etc/sysctl.d/* for package-supplied sysctl snippets, giving
admins the option to use /etc/sysctl.conf to override settings.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-04-13 10:16:45 +02:00
Matthias Schiffer
6c7307f133
base-files: remove /etc/uci-defaults/11_migrate-sysctl
11_migrate-sysctl has not been updated with new file hashes since 2012.
Let's get rid of it.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2018-04-13 10:16:45 +02:00
Alexander Couzens
2b84f95f38
base-files: change /var link from /tmp to tmp
Some packages are already using $(1)/var on package install.
On multiuser systems this breaks the build when multiple
users build OpenWrt.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2018-04-05 11:48:34 +02:00