Commit Graph

243 Commits

Author SHA1 Message Date
Gabor Juhos
de7324674a firmware-utils/mktplinkfw: add support for the TL-WR1041N v2
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31609
2012-05-05 17:02:38 +00:00
Gabor Juhos
84267683bb firmware-utils/mkfwimage: allow to override firmware magic
SVN-Revision: 30627
2012-02-18 14:45:54 +00:00
John Crispin
cd1a204365 Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.

This patch add two firmware utilities, mkbrncmdline and mkbrnboot.

mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.

mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.

The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage

The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.

A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 30532
2012-02-14 17:48:04 +00:00
Gabor Juhos
1338af2640 firmware-utils/mkmylofw: add WPE72 support
Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29913
2012-01-26 17:01:43 +00:00
John Crispin
ccb6b0a063 tools: clean up Makefiles / make ccache work
SVN-Revision: 29754
2012-01-15 11:43:13 +00:00
Gabor Juhos
8a8e5bde15 firware-utils/mktplinkfw: add TL-WR2543N/ND support
SVN-Revision: 29681
2012-01-07 19:36:40 +00:00
Gabor Juhos
923e5d3543 firmware-utils/mktplinkfw: add support for TL-WA701N/ND
SVN-Revision: 29655
2012-01-04 17:30:53 +00:00
Gabor Juhos
55e13f4e6a firmware-utils/mktplinkfw: add support for TL-MR3020
Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29650
2012-01-04 17:30:44 +00:00
Gabor Juhos
29a2c2ea80 firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image
SVN-Revision: 29544
2011-12-15 22:03:42 +00:00
Gabor Juhos
2592c0a283 tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layout
SVN-Revision: 29466
2011-12-06 16:26:41 +00:00
Gabor Juhos
54c8d61b03 firmware-utils/mktplinkfw: allow to align the rootfs on a specified boundary
SVN-Revision: 29445
2011-12-05 14:52:31 +00:00
Gabor Juhos
81cda3e2f1 firmware-utils/mktplinkfw: fix combined image creation
SVN-Revision: 29409
2011-12-03 16:57:21 +00:00
Gabor Juhos
6632e38d08 firmware-utils/mktplinfw: use htonl/ntohl
Based on a patch by Adrian Chadd <adrian@freebsd.org>

SVN-Revision: 29327
2011-11-24 20:09:40 +00:00
Gabor Juhos
13b0ec6cf7 firmware-utils/mktplinkfw: add TL-WR741ND v4
SVN-Revision: 28707
2011-11-01 11:20:54 +00:00
Vasilis Tsiligiannis
aadbbc4bac Add firmware tool for generating factory images for Edimax devices
SVN-Revision: 28688
2011-10-30 22:57:41 +00:00
Gabor Juhos
500a8e2014 firmware-utils/mktplinkfw: fix hardware id of the TL-WR740 v3
SVN-Revision: 28602
2011-10-26 13:34:48 +00:00
Gabor Juhos
712521955b firmware-utils/mktplinkfw: add support for TL-WR703N v1
Patch-by: dongyuqi <729650915@qq.com>

SVN-Revision: 28278
2011-09-21 11:47:55 +00:00
Gabor Juhos
ffbdaf8ec8 firmware-utils/mktplinkfw: add support for TL-WR743ND v1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 28270
2011-09-21 11:47:42 +00:00
Gabor Juhos
9faace4327 firmware-utils/mktplinkfw: add support for TL-WR740N v3
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

SVN-Revision: 28268
2011-09-21 11:47:39 +00:00
Felix Fietkau
bdb676b90d firmware-utils: rename the devname variable in mkwrgimg to avoid a clash with a BSD stdlib function
SVN-Revision: 27553
2011-07-08 05:20:24 +00:00
Gabor Juhos
9d980dc121 tools/firmware-utils: add yet another buffalo tool
SVN-Revision: 27475
2011-07-06 08:04:53 +00:00
Gabor Juhos
533067b8f5 tools/firmware-utils: allow to create buffalo image from two files
SVN-Revision: 27473
2011-07-06 08:04:50 +00:00
Gabor Juhos
ea6bc8858a tools/firmware-utils: allow to create buffalo tags w/o hw version
SVN-Revision: 27472
2011-07-06 08:04:49 +00:00
Gabor Juhos
1c5b7d0a32 tools/firmware-utils: add new firmware tool for the DIR-300-B1 board
SVN-Revision: 27438
2011-07-04 06:48:42 +00:00
Hauke Mehrtens
fbed51a8b5 firmware-utils: fix build on big endian systems
This closes #9446

SVN-Revision: 27255
2011-06-21 21:13:58 +00:00
Gabor Juhos
0d7a558f23 tools/firmware-utils: fix buffalo csum calculation
Also print an error message if decryption fails.

SVN-Revision: 27167
2011-06-13 08:12:41 +00:00
Gabor Juhos
145402e11b tools/firmware-utils: add support for hd_id tag into mkdniimg
Signed-off-by: Mark Mentovai <mark@moxienet.com>

SVN-Revision: 27052
2011-05-31 22:53:24 +00:00
Gabor Juhos
fb9a672c78 tools/firmware-utils: add buffalo specific fw tools
SVN-Revision: 27050
2011-05-31 22:53:21 +00:00
Florian Fainelli
dce13b8c4d bcm63xx: Add firmware helpers for T-Home Speedport W 303V
Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26877
2011-05-11 13:34:05 +00:00
Daniel Dickinson
f83c5938d2 bcm63xx: Move the OpenWrt rootfs length field
Dual image capable CFEs store an image sequence at the same place as
currently OpenWrt stores the actual rootfs length, so it will get
overwritten when flashing through such a CFE.

To prevent this from happening, move the rootfs length field to the next
four bytes, thus completely using the reserved1 field.

Since the reserved1 field is now completely in use, it does not make sense
to allow it to be set from the imagetag utility, so remove the option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 26680
2011-04-15 12:18:25 +00:00
Hauke Mehrtens
869fb691ec firmware-utils: fix endianness bugs in firmware generation program.
Should make it work on big endian systems again, I do not have such a system.

This closes #9093.

SVN-Revision: 26543
2011-04-09 15:06:01 +00:00
Gabor Juhos
72b3c18da1 firmware-utils/mktplinkfw: add support for the TP-Link TL-WA901ND v2 board
Patch-by: Jonathan Benett <jbscience87@gmail.com>

SVN-Revision: 26118
2011-03-13 15:08:29 +00:00
Hauke Mehrtens
e08740c747 brcm47xx: fix error when build firmware on x86_64 host (closes #7672)
SVN-Revision: 25472
2011-02-12 13:17:47 +00:00
Gabor Juhos
78ffb50c8e firmware-utils/mkdniimg: don't use NA region by default
SVN-Revision: 24981
2011-01-14 10:37:09 +00:00
Gabor Juhos
e116785f27 firmware-utils/wndr3700: allow to specify image magic via command line
SVN-Revision: 24980
2011-01-14 10:37:04 +00:00
Daniel Dickinson
fc3a1d0ba3 Added OpenWRT-specific field to imagetag so that we can record the real root length, so that when the CRC fixup is applied and the root length is recorded as zero we can still calculate the rootfs mtd partition size.
Signed-off-by: Daniel Dickinson <daniel@cshore.neomailbox.net>

SVN-Revision: 24838
2010-12-26 04:18:13 +00:00
Gabor Juhos
0f659a13dd ar71xx: add support for TL-WR740N v1
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 24811
2010-12-23 12:42:16 +00:00
Gabor Juhos
29379780a6 firmware-utils/mkzynfw: fix available flash space calculation
SVN-Revision: 24653
2010-12-17 20:34:31 +00:00
Gabor Juhos
912a140b19 firmware-utils/mktplinkfw: add support for the TL-MR3220 v1
SVN-Revision: 24438
2010-12-10 17:57:43 +00:00
Hauke Mehrtens
41b3383499 brcm47xx: Add edimax PS1208mfg support
Thank you clemvangelis for the patches. (closes #7672)

SVN-Revision: 24217
2010-12-02 21:27:54 +00:00
Daniel Dickinson
eadb5c84fa imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
SVN-Revision: 24011
2010-11-16 06:46:53 +00:00
Daniel Dickinson
6cd4575153 brcm63xx: imagetag: Fixed occaisonal wrong CRC in image due to using strncpy to copy the CRC into the imagetag. strncpy stops copying after a 00 byte, memcpy doesn't.
SVN-Revision: 24000
2010-11-15 04:08:09 +00:00
Gabor Juhos
1d855c0890 firmware-utils/mktplinkfw: add support for the TL-MR3420 v1
SVN-Revision: 23137
2010-09-27 14:54:02 +00:00
Gabor Juhos
142fb3e229 firmware-utils/mktplinkfw: add support for the TL-WR841N v7
SVN-Revision: 23133
2010-09-27 14:53:51 +00:00
Michael Büsch
f40f0c001e Zcomax device firmware tool endianness fix
SVN-Revision: 22885
2010-09-04 05:40:56 +00:00
Gabor Juhos
7bf8159991 tools/firmware-utils: new tool for the Zcomax devices
SVN-Revision: 22883
2010-09-03 18:14:40 +00:00
Hauke Mehrtens
7640f89045 brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/

This closes #7702.

SVN-Revision: 22516
2010-08-06 20:21:32 +00:00
Hauke Mehrtens
da7493d8f9 mostly revert commit r22396
CFE does not boot images generated with these checksums because of
wrong checksum.

After flashing then with tftp to my Asus wl500-GPv1 the following messages
are show:
Null Rescue Flag.
Boot program checksum is invalid
Hello!! Enter Rescue Mode: (Check error)

SVN-Revision: 22418
2010-07-30 21:19:49 +00:00
Michael Büsch
02549b0448 firmware-utils/trx: Endianness fixes
SVN-Revision: 22414
2010-07-29 18:14:10 +00:00
Hauke Mehrtens
233294722c firmware-utils: The option -F was not detected. This was missing in r22396
This fixes build of brcm47xx

SVN-Revision: 22398
2010-07-27 18:16:32 +00:00
Markus Wigge
7a052dc799 fix CRC32 calculation for sysupgrade
* reduce image size for CRC calculation by fs_mark size

sysupgrade sometimes failed for me and I noticed that it was due
to incorrect CRC values in trx-header after performing it.
It seems that the fs_mark was completely included in the calculation
and that it was nevertheless modified by sysupgrade while appending
the jffs data.
This only occurs for the first boot after sysupgrade as the flashmap
driver recalculates the CRC to an even smaller area when it boots.

SVN-Revision: 22396
2010-07-27 15:37:37 +00:00
Gabor Juhos
a06400d432 tools/firmware-utils: enhance mktplinkfw utility
Attached patch enhances the mktplinkfw utility:
1. existing firmware files in TP-Link format can now be inspected, showing eg. the used offsets
2. optionally the kernel and rootfs parts can be extracted (saves calculations for dd)
3. when generating firmwares, kernel entry point, load address and rootfs offset can be overwritten (for experienced users)

Patch-by: Pieter "Fate" Hollants <pieter@hollants.com>

SVN-Revision: 22169
2010-07-13 16:51:59 +00:00
Gabor Juhos
48e579a536 firmware-utils/mktplinkfw: add support for the TL-WA901ND
Patch-by: Pieter "Fate" Hollants <pieter@hollants.com>

SVN-Revision: 22015
2010-07-01 14:49:04 +00:00
Markus Wigge
642a6e1a51 preset stable and try* flags for TRX2 headers
* changed addpattern.c to preset the stable and try flags used in TRXv2 images
to dupe CFE and pretend a stable image.
* changed trx.c to calculate TRXv2 CRC with stable and try flags set to 0xFF
like CFE does on startup
* fixed compile warnings in trx.c by explicit casting

SVN-Revision: 22012
2010-07-01 10:40:22 +00:00
Markus Wigge
67416b62d7 fixed trx version to handling
I forgot to write the right trx version to the actual header...

SVN-Revision: 21986
2010-06-28 17:35:20 +00:00
Florian Fainelli
e79f259abf remove whitespaces in imagetag tool
SVN-Revision: 21848
2010-06-20 11:58:40 +00:00
Florian Fainelli
39fa664f99 Revert r21806 there are no users of it yet
SVN-Revision: 21808
2010-06-14 21:49:03 +00:00
Florian Fainelli
3a332f39de add hcsmakeimage, for cable modems/routers based on bcm33xx
SVN-Revision: 21806
2010-06-14 21:47:21 +00:00
Florian Fainelli
5ec4eabfcb fix mktitanimg segfault on 64-bits hosts (#7443)
SVN-Revision: 21767
2010-06-12 18:10:01 +00:00
Florian Fainelli
04a4638910 add mktitanimg to create Titan (AR7-based) images (#6632)
SVN-Revision: 21689
2010-06-06 19:16:43 +00:00
Gabor Juhos
01d8285e47 firmware-utils/mkzynfw: add support for the NBG460N board
Adding NBG460N/550N/550NH boards to mkzynfw.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 21446
2010-05-14 09:20:36 +00:00
Gabor Juhos
8976d8f2ad firmware-utils/mkzynfw: don't use next_offset twice (closes #7273)
The test if a file can fit in an image considers the current offset
twice. So a image that would fit is too big.

Thanks-to: Michael Kurz <michi.kurz@googlemail.com>

SVN-Revision: 21445
2010-05-14 09:20:34 +00:00
Gabor Juhos
edac7e5a63 tools/firmware-utils: add size check to the mkplanexfw tool
Also pad the image to a 64K boundary.

SVN-Revision: 21174
2010-04-26 18:28:07 +00:00
Nicolas Thill
0946764732 remove 'svn:executable' property
SVN-Revision: 20831
2010-04-12 17:08:57 +00:00
Florian Fainelli
2a4fb82289 flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore.
SVN-Revision: 20652
2010-04-01 21:20:43 +00:00
Florian Fainelli
dad85cddac move bcm_tag.h out of the flashmap patch so that user-land tools can re-use it
SVN-Revision: 20548
2010-03-28 18:11:06 +00:00
Gabor Juhos
585198518e firmware-utils/trx: add relative offset parameter
* will be used for the WRT160NL board
 * patch by Bernhard Loos
 * note: rejected parts has been fixed

SVN-Revision: 20522
2010-03-27 17:38:26 +00:00
Florian Fainelli
5d2105af23 revert r18760 since it prevents people from building working eva images
SVN-Revision: 20437
2010-03-26 10:12:30 +00:00
Markus Wigge
d9a698e77c added support for wrt54g3gv2-vf and new trx header format
- hacked addpattern due to changes in header format
 - added "-5" to addpattern, some 0xFF are needed for trx2 header
   "-4" broke CRC checking in CFE
 - hacked trx.c due to new header format version
 - added target to create trx-V2 images

the flashmap driver possibly needs to be customized.

SVN-Revision: 20433
2010-03-25 19:34:49 +00:00
Florian Fainelli
66dc3ee0c9 fix file creation mode, thanks rtz
SVN-Revision: 20293
2010-03-18 23:35:12 +00:00
Gabor Juhos
c07fdecea8 mktplinkfw: add option to strip padding from the end of the image
SVN-Revision: 20120
2010-03-10 17:41:50 +00:00
Gabor Juhos
4ccab48a6b mktplinkfw: fix help string, and remove duplicated option
SVN-Revision: 20067
2010-03-08 17:35:07 +00:00
Gabor Juhos
7fd1228672 firmware-utils/mktplinkfw: add board definitions for TL-WR941ND v4
SVN-Revision: 19748
2010-02-19 11:52:30 +00:00
Jo-Philipp Wich
14f6a53b6d firmware-utils: unify cc and cc2 macros, simplifies Makefile
SVN-Revision: 19487
2010-02-01 01:56:02 +00:00
Jo-Philipp Wich
e0933ce6e6 firmware-utils: copy bcm_tag.h to src/ and get rid of cc3 macro, fixes imagetag compilation
SVN-Revision: 19485
2010-02-01 01:17:46 +00:00
Gabor Juhos
cace9f4566 ar71xx: add support for the TL-WR841N v1.5 board
SVN-Revision: 18893
2009-12-22 19:31:28 +00:00
Michael Büsch
d0ca6b9080 lzma2eva: Endianness fixes.
SVN-Revision: 18760
2009-12-11 23:50:51 +00:00
Gabor Juhos
7d8a1bf239 ar71xx: TL-WR1043ND support cleanup
SVN-Revision: 18697
2009-12-08 12:46:30 +00:00
Gabor Juhos
b12d752a63 ar71xx: preliminary support for the TL-WR1043ND
Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform.
Presently the RTL8366RB switch support is missing due to no driver.
The ethernet works with 5 ports@1Gbit but is missing vlan support.

Hope Ive done this right, First time submiting a patch.

Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>

SVN-Revision: 18696
2009-12-08 12:46:25 +00:00
Gabor Juhos
6d2fa1c896 ar71xx: create images for the WNDR3700, which can be flashed via the factory web interface
SVN-Revision: 18571
2009-11-28 09:28:25 +00:00
Gabor Juhos
09b5ed9641 firmware-utils: add WNDR3700 image fixing tool (thanks to Anael Orlinski)
SVN-Revision: 18569
2009-11-28 08:25:53 +00:00
Felix Fietkau
e999c93128 mkfwimage: add support for the XM layout (bullet/rocket/nano M)
SVN-Revision: 18448
2009-11-18 18:10:24 +00:00
Gabor Juhos
e6a40cac9a ar71xx: increase max size of RouterStation and RouterStation Pro firmware images
Thanks to riskable! (closes #5860)

SVN-Revision: 18410
2009-11-13 17:11:23 +00:00
Gabor Juhos
7849923473 ar71xx: add preliminary support for the TL-WR841ND v5 board
SVN-Revision: 18226
2009-10-30 12:26:25 +00:00
Felix Fietkau
f32f0814b1 firmware-utils: raise the default trx image size limit for something more appropriate for devices with 8M flash
SVN-Revision: 17537
2009-09-07 13:55:02 +00:00
Florian Fainelli
85698765da add support for the Pirelli AG226G board (#5337)
SVN-Revision: 17190
2009-08-09 10:19:47 +00:00
Gabor Juhos
59c1e90fd7 firmware-utils/addpattern: add support for the WRT160NL
SVN-Revision: 17140
2009-08-06 09:15:05 +00:00
Gabor Juhos
86d7900724 firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)
SVN-Revision: 16792
2009-07-12 08:59:18 +00:00
Gabor Juhos
a21bf40453 increase size of the kernel partition on the TL-WR[789]41N boards
SVN-Revision: 16785
2009-07-11 17:20:46 +00:00
Gabor Juhos
db71f38ed6 firmware-utils/mktplinkfw: add option for combined images
SVN-Revision: 16742
2009-07-08 08:17:26 +00:00
Gabor Juhos
4be401d44b firmware-utils/mktplinkfw: add board definitions for TL-WR741ND v1
SVN-Revision: 16740
2009-07-07 19:45:33 +00:00
Florian Fainelli
9e94806990 fix segfault when using the maxlen argument (#4359)
SVN-Revision: 16641
2009-07-01 14:58:15 +00:00
Gabor Juhos
c79ee4222e firmware-utils: add a tool to compute crc value for the 5gxi firmware
SVN-Revision: 16557
2009-06-25 09:41:06 +00:00
Gabor Juhos
d14e512f00 firmware-utils/mkcsysimg: minor bugfix
SVN-Revision: 16556
2009-06-25 09:39:30 +00:00
Gabor Juhos
19afadf0b2 firmware-utils/mkcsysimg: add signature for the 5GXi board
SVN-Revision: 16551
2009-06-24 16:44:30 +00:00
Gabor Juhos
c1a4eef483 firmware-utils: add a file {en,de}cryption tool, based on the PC1 encryption algrithm
SVN-Revision: 16550
2009-06-24 16:35:38 +00:00
Florian Fainelli
1795111337 add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364)
SVN-Revision: 16506
2009-06-18 15:00:32 +00:00
Felix Fietkau
a6d8f8be9e firmware-utils: add a small utility for generating nand flash images with ecc info
SVN-Revision: 16458
2009-06-14 20:42:28 +00:00
Florian Fainelli
ca16accfbb The attached patch adds building of firmware images for more routers based on the brcm63xx chipset.
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>

SVN-Revision: 16396
2009-06-10 08:24:13 +00:00
Florian Fainelli
01118457e8 rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987).
SVN-Revision: 16393
2009-06-09 08:04:52 +00:00