Commit Graph

109 Commits

Author SHA1 Message Date
Zoltan HERPAI
d6cf997bd7 uboot-sunxi: update ATF dependencies for 3 boards
Fix 3 board definitions that were missed in the process of moving
to the a64/h6 ATF blobs.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-15 00:24:50 +02:00
Zoltan HERPAI
9aa66b8ce7 sunxi: add support for Banana Pi M2 Berry
CPU: Allwinner V40 quad-core Cortex A7 @ 1.2GHz
Memory: 1GB DDR3
Storage: SDcard, native SATA
Network: 10/100/1000M ethernet, Ampak AP6212 wifi + BT
USB: 4x USB 2.0

Installation:
Use the standard sunxi installation to an SD-card.

While the board is very similar to the M2 Ultra board
(the V40 is the automotive version of the R40), as both
the u-boot and kernel supports them separately, and some
pins are different, let's add a separate device spec.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-12 14:02:02 +02:00
Zoltan HERPAI
3225241c2b sunxi: add support for H6 boards and OrangePiOnePlus
Specifications:

SoC	Allwinner H6 @ 1.8 Ghz
DRAM	1Gb LPDDR3
Power	DC 5V @ 3A
Video	HDMI (Type 2.0A - full)
Audio	HDMI, on-board microphone
Network	10/100/1000Mbps Ethernet (Realtek RTL8211)
Storage	microSD
USB	1 USB2.0 Host, 1 USB2.0 OTG
Debug	Serial UART

Flashing instructions:
 Standard sunxi SD card installation procedure - copy image to SD card,
 insert into SD card slot on the device and boot.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-11 23:14:55 +02:00
Zoltan HERPAI
c2163530db arm-trusted-firmware-sunxi: move to use the common tf-a build code and bump to latest version
Create a -a64 package for now. Moving to the latest ATF was tested on a
SoPine A64 board.

U-Boot SPL 2020.04 (Feb 19 2021 - 11:28:19 +0000)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE:  BL31: v2.4(release):reboot-15854-g42b39a13d2
NOTICE:  BL31: Built : 22:45:53, Feb 22 2021
NOTICE:  BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE:  BL31: Found U-Boot DTB at 0x4090a28, model: SoPine with baseboard
NOTICE:  PSCI: System suspend is unavailable

U-Boot 2020.04 (Feb 19 2021 - 11:28:19 +0000) Allwinner Technology

CPU:   Allwinner A64 (SUN50I)
Model: SoPine with baseboard
DRAM:  2 GiB

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-11 23:14:54 +02:00
Zoltan HERPAI
c75d441f20 uboot-sunxi: add ATF variable for specifying which flavour to use
In preparation for H6 support (which requires a separate ATF blob), add
an envvar to the A64 boards specifying which ATF blob to use.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2021-04-11 23:14:52 +02:00
Georgi Valkov
3cc57ba462 uboot-sunxi: add missing type __u64
Non Linux systems e.g. macOS lack the __u64 type and produce build errors:
In file included from tools/aisimage.c:9:
In file included from include/image.h:19:
In file included from ./arch/arm/include/asm/byteorder.h:29:
In file included from include/linux/byteorder/little_endian.h:13:
include/linux/types.h:146:9: error: unknown type name '__u64'; did you mean '__s64'?
typedef __u64 __bitwise __le64;

Resolved by declaring __u64 in include/linux/types.h
Build tested on macOS and Ubuntu.

Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
2021-03-01 00:34:23 +01:00
Jiang Yongquan
799fca7602 sunxi: add support for linksprite pcDuino3 nano board
Specifications:

 - SoC: Allwinner A20 @ 1Ghz
 - DRAM: 1GiB DDR3 @ 408MHz (K4B4G1646Q-HYK0)
 - NAND: 4GB MLC NAND (H27UBG8T2BTR-BC)
 - Ethernet: 10/100/1000Mbps Ethernet (Realtek RTL8211E)

Flash instructions:

dd if=openwrt-sunxi-cortexa7-linksprite_pcduino3-nano-ext4-sdcard.img
of=/dev/sdX

Signed-off-by: Jiang Yongquan <woxwchc@foxmail.com>
[Remove CONFIG_REALTEK_PHY from sunxi/cortexa53 config]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-01-27 23:14:30 +01:00
Roman Kuzmitskii
02e8182d87 sunxi: add support for Libre Computer ALL-H3-CC H5
Specification:

- CPU: Allwinner H5, Quad-core Cortex-A53 Up to 1GHz
- DDR3 RAM: 2GB
- Network:
    10/100M Ethernet x 1
- IR: x1 (Receive)
- USB (Host) Type-A x3
- USB (OTG) Type-A x1
- MicroSD Slot x 1
- eMMC Slot x1
- MicroUSB power input
- GPIO 40pin header
- UART 3pin header
- Leds:
    - librecomputer:blue:status
    - librecomputer:green:pwr
- Buttons:
    - uboot button (used to enter fel mode)
    - power button (can trigger power on)
- Power Supply via MicroUSB or GPIO 5V/2A

Installation:

- Write the image to SD Card with dd
- Boot from the SD Card

Signed-off-by: Roman Kuzmitskii <damex.pp@icloud.com>
[Fixed Signed-off-by]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-11-12 18:21:17 +01:00
Hauke Mehrtens
7f5f738466 sunxi: Adapt U-Boot config to board rename
The board was renamed without changing the BUILD_DEVICES in the U-Boot
Makefile, this broken the build.

Fixes: 0830ae3a2f ("sunxi: Correct manufacturer name to Sinovoip")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-10-18 15:46:42 +02:00
Jayantajit Gogoi
e6d9f6fdff sunxi: add support for FriendlyARM NanoPi R1
Specification:

- CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
- DDR3 RAM: 512MB/1GB
- Network:
    10/100/1000M Ethernet x 1,
    10/100M Ethernet x 1
- WiFi: 802.11b/g/n, with SMA antenna interface
- USB Host: Type-A x2
- MicroSD Slot x 1
- MicroUSB: for OTG and power input
- Debug Serial Port: 3Pin 2.54mm pitch pin-header
- LED:
    nanopi:red:status
    nanopi:green:wan
    nanopi:green:lan
- KEY:
    reset
- Power Supply: DC 5V/2A

Installation:

- Write the image to SD Card with dd
- Boot NanoPi from the SD Card

Signed-off-by: Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
2020-10-18 15:46:42 +02:00
Arturas Moskvinas
679db02b10 sunxi: add support for FriendlyArm Zeropi
Specification

    CPU: Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz
    DDR3 RAM: 256MB/512MB
    Connectivity: 10/100/1000Mbps Ethernet
    USB Host: Type-A x 1
    MicroSD Slot x 1
    MicroUSB: for power input only
    Debug Serial Port: 4Pin, 2.54 mm pitch pin header
    Power Supply: DC 5V/2A
    PCB Dimension: 40 x 40 x 1.2mm

Installation:

    Burn the image file to an SD Card with dd or any image burning tool
    Boot ZeroPi from the SD Card

The following features are working and tested:

    Ethernet port 10/100/1000M Ethernet

Remarks: SBC is mostly compatible and boots with FriendlyARM NanoPI M1 plus DTS also (zeropi has no working hdmi)

Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
2020-10-11 18:29:26 +02:00
Petr Štetiar
8e99bbda19 uboot-sunxi: bump to 2020.04 relase
Refreshed patches, removed upstreamed patch:

 260-configs-a64-olinuxino-emmc-add-eMMC-boot-part-config.patch

Boot tested on a64-olinuxino-emmc.

Cc: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-04-17 13:43:34 +02:00
Petr Štetiar
5f2ff607e2 uboot-sunxi: a64: allow booting directly from eMMC
Current boot script uses hardcoded bootdevice, which allows booting from
SD card only, so this patch allows booting directly from eMMC as well.
While at it, replace fixed root device with more flexible UUID based
probing, so from now on probing order of MMC device doesn't matter.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
90897df61a uboot-sunxi: add support for Olimex A64-Olinuxino eMMC
Adding U-Boot image for Olimex A64-Olinuxino eMMC, including patch which
adds eMMC boot partition configuration commands.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
cda9af568b uboot-sunxi: add support for Olimex A64-Olinuxino
Adding U-Boot image for Olimex A64-Olinuxino.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Petr Štetiar
461a1d5a04 uboot-sunxi: rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3
Rename the board as done in upstream commit 268ae6548779 ("sunxi: Rename
Sinovoip BPI M2 Plus to Bananapi M2 Plus H3") which backs the rename
with the following reasoning:

 The brand Sinovoip is used for Sinovoip's original VOIP products, while
 the Bananapi brand is for the single board computers they produce.  This
 has been verified by Bananapi. Rename the board from "Sinovoip BPI M2
 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is
 used.

 To support the H5 variant of this board, the "H3" suffix is added to
 the defconfig name.

This has to be done in order to allow building U-Boot past v2019.04
release where this change was introduced.

Ref: https://github.com/openwrt/openwrt/pull/2849#discussion_r396401489
Suggested-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Aleksander Jan Bajkowski
a9bd89fe18 uboot-sunxi: Banana Pi M2 Ultra switch to mainline defconfig
U-boot also have defconfig for this board. In 2019.01 branch they are identical.

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2020-03-28 13:03:02 +01:00
Petr Štetiar
48436953e9 uboot-sunxi: bump to 2020.01
Refreshed patches, removed following, probably obsolete patches:

 221-compatible-old-dtc.patch
 240-sun50i-h5-Orange-Pi-Zero-Plus-Fix-SdCard-detection.patch

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-03-28 13:03:02 +01:00
Roman Bazalevsky
69fff339e9 sunxi: add support for FriendlyARM Nano PI NEO Air dev board
Hardware:

  Allwinner H3 upto 1.2GHz
  512MB DDR3 RAM
  8GB on-board eMMC - mountable, can be used as boot with custom boot.scr
  microSD-card slot
  WiFi 802.11n (AP6212A) - working
  Bluetooth (AP6212A) - not working for now
  Micro-USB OTG + 2*USB headers
  UART 3.3V - working
  GPIO/I2C/SPI 2.54mm headers

Standard sunxi SD-card installation procedure - copy image to SD card,
insert in into slot and boot. First time you will need UART adapter to
enable on-board wireless (or just build custom image with enabled WiFi).

To boot from eMMC:

  - boot from SD
  - copy SD image to emmc (dd bs=... if=.... of=/dev/mmcblk2)
  - mount eMMC boot partition and replace boot script on it
  - unmount, reboot

To use i2c, spi and more uarts - replace dtb on boot partition with
fixed one (use dtc or fdt-tools).

Signed-off-by: Roman Bazalevsky <rvb@rvb.name>
[rebase onto device name consolidation patches]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-13 12:20:09 +01:00
Adrian Schmutzler
a4cdb537b1 sunxi: use vendor_device scheme for device definitions
This changes device definition to resemble the vendor_device scheme
already present for the majority of device compatible strings.

By doing this, we achieve several advantages at once:
- Image names and node names are more consistent with other targets.
- SUPPORTED_DEVICES can be set automatically for all but two cases.
- Image names and node names are in line with DEVICE_TITLEs.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-13 12:19:44 +01:00
Hal Martin
3819c1638a sunxi: Add support for Banana Pi M2 Ultra
CPU: Allwinner R40 Quad-Core Cortex-A7 @ 1.2GHz
GPU: Mali 400 MP2
Memory: 2GB DDR3 onboard (shared with GPU)
Onboard: Storage microSD card slot
Onboard: Storage 8GB eMMC
Onboard: Network 10/100/1000M Ethernet RJ45
Onboard: Network WiFi 802.11b/g/n 1x1 (AMPAK AP6212; brcmfmac)
Onboard header: SPI, I2C, GPIO, UART
USB: Two USB 2.0 Host, One USB 2.0 OTG

Known issues:
- WiFi doesn't work
- eMMC not supported

Signed-off-by: Hal Martin <hal.martin@gmail.com>
2019-09-21 01:12:35 +02:00
Zoltan HERPAI
5e247f3ac1 uboot-sunxi: add fix for A20-OLinuXino-Lime2-eMMC rev. K boards
The OLinuXino Lime2 rev. K boards use new PHYs (Micrel KSZ9031),
so enable that.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-03-13 22:43:13 +01:00
Zoltan HERPAI
e991fb44e0 uboot-sunxi: bump to 2019.01
Tested on:
Bananapro (A20)
Banana Pi M3 (A83t)
Linksprite pcDuino3 (A20)
Olinuxino Lime (A10)
Orange Pi 2 (H3)
Pine64 (A64)

Patches refreshed.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-03-13 22:42:38 +01:00
Aleksander Jan Bajkowski
445ca981d1 sunxi: add support for Orange Pi PC Plus
CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz
GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0)
Memory: 1GB DDR3 (shared with GPU)
Onboard: Storage TF card (Max. 64GB) / MMC card slot
Onboard: Storage 8 GB eMMC
Onboard: Network 10/100M Ethernet RJ45
Onboard: Network WiFi 802.11 b/g/n (Realtek RTL8189FTV)
Onboard header: SPI, I2C, GPIO, UART
USB 2.0: Three USB 2.0 HOST, One USB 2.0 OTG

Known issues:
-Wifi diesn't work

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2019-03-09 18:55:15 +01:00
Aleksander Jan Bajkowski
00d89b4a89 sunxi: add support for Orange Pi One
CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz
GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0)
Memory: 512MB DDR3 (shared with GPU)
Onboard: Storage TF card (Max. 64GB) / MMC card slot
Onboard header: SPI, I2C, GPIO, UART
USB 2.0: One USB 2.0 HOST, One USB 2.0 OTG

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
2019-02-26 23:20:04 +01:00
Pawel Dembicki
d5f615bf2a sunxi: add support for Sinovoip Banana Pi M2 Plus
CPU: H3 Quad-core Cortex-A7 H.265/HEVC 4K @ 1.2 Ghz
GPU: Mali400MP2 GPU @ 600MHz (supports OpenGL ES 2.0)
Memory: 1GB DDR3 (shared with GPU)
Onboard: Storage TF card (Max. 64GB) / MMC card slot
Onboard: Network 10/100M Ethernet RJ45 (Realtek RTL8211E)
Onboard: Network BT4.0/WiFi 802.11 b/g/n (Ampak AP6212)
Onboard header: SPI, I2C, GPIO, UART
USB 2.0: Two USB 2.0 HOST, One USB 2.0 OTG

Untested:
Audio, Video

Not working:
Bluetooth

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-02-17 19:22:39 +01:00
Hauke Mehrtens
d560deb7f2 uboot-sunxi: Orange Pi Zero Plus: Fix SdCard detection
The Detection pin is at PF6 and not at PH13 like defined before. I
checked the schematics and now I am am not seeing this error message any
more:
Loading Environment from FAT... Card did not respond to voltage select!

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 17:35:14 +01:00
Zoltan HERPAI
7a53fb40ca uboot-sunxi: disable AXP209 on Olimex A13 Olinuxino
Disable the PMIC on Olimex A13 Olinuxino, as the SPL cannot set the
core voltage correctly, which causes the board to freeze later at
kernel if CPU throttling is enabled (see below). This will almost
certainly kill the VGA output (which requires LDO3 to be set), but
this is still a better option than to disable CPU throttling for
all Cortex-A8 based devices.

[    2.485632] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 384000 KHz
[    2.525698] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 432000 KHz

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-01-13 17:35:14 +01:00
Zoltan HERPAI
d605831068 uboot-sunxi: update Theobroma A31 Pangolin support
Drop removed pinctrl definitions from the i2c3 pin layout.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-01-13 17:35:14 +01:00
Hauke Mehrtens
4ed05b805b uboot-sunxi: Update to version 2018.11
This updates the uboot for the sunxi target to version 2018.11
The removed patches are applied upstream and not needed any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 17:35:14 +01:00
Julian Haupt
0308385d1d sunxi: add support for Orange Pi Zero
Signed-off-by: Julian Haupt <julian.haupt@hauptmedia.de>
2018-10-07 22:16:10 +02:00
Jasper Scholte
a689307c97 sunxi: build image/uboot for the NanoPi NEO2
The NanoPi NEO2 is a small Allwinner H5 based board available with
different DRAM configurations.
This board is very similar to the NanoPi NEO PLUS2

Signed-off-by: Jasper Scholte <NightNL@outlook.com>
2018-09-22 21:20:55 +02:00
Antonio Silverio
e2e39328d5 sunxi: Added support for Xunlong Orange Pi PC2
CPU: H5 High Performance Quad-core 64-bit Cortex-A53
GPU: Mali450 OpenGL ES 2.0/1.1/1.0, OpenVG 1.1, EGL
Memory: 1GB DDR3 (shared with GPU)
Onboard Storage: TF card (Max. 32GB) / NOR flash(2MB)
Onboard Network: 1000M/100M Ethernet RJ45
USB 2.0 Ports: Three USB 2.0 HOST, one USB 2.0 OTG, HOST mode
role by default in DTS
Buttons: Power Button(SW4) Debug TTL

UART: ..DC-IN..
>[GND][RX][TX] ..HDMI..

Signed-off-by: Antonio Silverio <menion@gmail.com>
2018-08-09 12:06:58 +02:00
Hauke Mehrtens
9a26a9e8b9 uboot-sunxi: update Orange Pi R1 and Zero Plus
The device tree files are now matching the kernel 4.17 and this will be
send also for integration into mainline U-Boot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-06-18 07:10:20 +02:00
Hauke Mehrtens
f2135e7811 uboot-sunxi: update to version 2018.05
This patch 220-add-sunxi50i-nanopi-neo-plus2.patch was merged upstream.
The u-boot-sunxi-with-spl.bin is now also created for the ARM64 sunxi
boards by U-Boot itself, no need to do it manually any more.

This was tested on a H2+ Orange Pi R1 and a H5 Orange Pi Zero Plus.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-06-18 07:10:20 +02:00
Fan Fan
8e1065d681 sunxi: add build for sopine
This will generate image for Pine64 Sopine board.

Signed-off-by: Fan Fan <fkpwolf@gmail.com>
2018-03-23 23:53:20 +01:00
Zoltan HERPAI
ed369e0481 uboot-sunxi: refresh patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-03-21 17:08:35 +01:00
Hauke Mehrtens
367ee3274d uboot-sunxi: fix build by adding comparabilities for old dtc
We use the dtc from the kernel and that does not have all the options
which u-boot would like to use now. make these parameters optional.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
[wigyori@uid0.hu: renamed to 221-compatible-old-dtc.patch from 220-]
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-03-21 17:08:19 +01:00
Zoltan HERPAI
7e1e29de75 uboot-sunxi: bump again to 2017.11
Runtime-tested on:
 - Pine64 (A64)
 - Orange Pi 2 (H3)
 - Bananapro (A20)
 - Olimex A20-Micro (A20)
 - Pcduino v3 (A20)
 - Pcduino v2 (A10)

Compile-tested on:
 - all A8/A7/A53 boards

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-03-21 17:07:06 +01:00
Vitalij Alshevsky
8584fee310 uboot-sunxi: add Xunlong Orange Pi PC
Signed-off-by: Vitalij Alshevsky <v_alshevsky@tut.by>
2018-02-26 11:23:55 +01:00
Hauke Mehrtens
718e5cd1cf uboot-sunxi: Add Xunlong Orange Pi Zero Plus
This is based on a patch from armbian:
https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-orangepi-zeroplus.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-17 01:15:25 +01:00
Antony Antony
3c24a1d423 sunxi: add support for NanoPi NEO Plus2 board
arm64: allwinner: h5: NanoPi NEO Plus2 DT support
Add initial DT for NanoPi NEO Plus2 by FriendlyARM
    - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU
    - 1 GB DDR3 RAM
    - 8GB eMMC flash (Samsung KLM8G1WEPD-B031)
    - micro SD card slot
    - Gigabit Ethernet (external RTL8211E-VB-CG chip)
    - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module)
    - 2x USB 2.0 host ports & 2x USB via headers

Signed-off-by: Antony Antony <antony@phenome.org>
2018-02-17 01:15:24 +01:00
Antony Antony
6247929d66 uboot-sunxi: add u-boot DT for NanoPi NEO Plus2 board
u-boot upstream commit 6130b1f6bc23

Signed-off-by: Antony Antony <antony@phenome.org>
2018-02-17 01:15:24 +01:00
Hauke Mehrtens
c971b4eeea uboot-sunxi: dts: Update orange Pi R1 integration
This syncs the Orange Pi R1 device tree files with the one from the
upstream kernel and also uses the default configuration from the Orange
Pi Zero.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-17 01:15:24 +01:00
Zoltan HERPAI
94ef87f49d Revert "uboot-sunxi: bump to 2017.11"
This reverts commit 805f756d6e.

Move back to 2017.07 until we move sunxi to GCC7.

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-16 12:17:15 +01:00
Zoltan HERPAI
4bc1ebbd88 Revert "uboot-sunxi: refresh patches"
This reverts commit f142de5f44.

Revert until we can move to 2017.11

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-16 11:40:01 +01:00
Zoltan HERPAI
616f883a20 Revert "uboot-sunxi: fix build by adding comparabilities for old dtc"
This reverts commit ef0416666f.

Revert until we can move to 2017.11

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-16 11:39:13 +01:00
Hauke Mehrtens
ef0416666f uboot-sunxi: fix build by adding comparabilities for old dtc
We use the dtc from the kernel and that does not have all the options
which u-boot would like to use now. make these parameters optional.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-10 15:39:00 +01:00
Hauke Mehrtens
f142de5f44 uboot-sunxi: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-02-10 15:39:00 +01:00
Zoltan HERPAI
805f756d6e uboot-sunxi: bump to 2017.11
Runtime-tested on:
 - Pine64 (A64)
 - Orange Pi 2 (H3)
 - Bananapro (A20)
 - Olimex A20-Micro (A20)
 - Pcduino v3 (A20)
 - Pcduino v2 (A10)

Compile-tested on:
 - all A8/A7/A53 boards

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2018-02-06 12:52:00 +01:00