Commit Graph

20425 Commits

Author SHA1 Message Date
Hauke Mehrtens
cfc9bde379 kernel/modules: Add missing config option
This configuration option was added in kernel 4.15 and is missing in the
kernel 4.19 configuration.

Fixes: ed2839ac41 ("kernel/modules: add kmod-pmbus-zl6100 module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 17:20:07 +01:00
Hauke Mehrtens
403d36ef3d malta: Add support for kernel 4.19
This adds a kernel configuration file for kernel 4.19 on malta.
CONFIG_POWER_RESET_PIIX4_POWEROFF and CONFIG_POWER_RESET_SYSCON were
activated because malta now uses this driver for reboot.

CONFIG_BLK_DEV_SR was also added because it was also added to the kernel
default configuration.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 16:31:40 +01:00
Hauke Mehrtens
4ab689c137 malta: Refresh kernel 4.14 configuration
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 16:31:38 +01:00
Hauke Mehrtens
c54e4747be kernel: MIPS: Add CPU option reporting to /proc/cpuinfo
Many MIPS CPUs have optional CPU features which are not activates for
all CPU cores. Print the CPU options which are implemented in the core
in /proc/cpuinfo. This makes it possible to see what features are
supported and which are not supported. This should cover all standard
MIPS extensions, before it only printed information about the main MIPS
ASEs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 16:24:50 +01:00
Hauke Mehrtens
c7102a7699 kernel/modules: Fix build of kmod-pmbus
This fixes two build problems introduced with the recently added new
kernel module package.

Fixes: ed2839ac41 ("kernel/modules: add kmod-pmbus-zl6100 module")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-13 13:16:02 +01:00
Chuanhong Guo
bd03255ec4 generic: ar8216: ar8327: kill warnings
This fixed warnings caused by returning value in a void function

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-01-13 12:25:30 +01:00
David Bauer
97e4311fca mpc85xx: add support for Sophos RED 15w Rev.1
Hardware
========
CPU:  Freescale P1010 PowerPC
RAM:  128M DDR3
NAND: 128MiB
ETH:  RTL8211F SGMII PHY
      RTL8367B 5-port RGMII switch
      (not connected to SoC - unmanaged)
WiFi: SparkLan WPEA-121N
       - Atheros AR9382 2T2R abgn
USB:  1x USB 2.0
LED:  System, Router, Internet, Tunnel controllable
      LAN1-4, WAN, Power non-controllable
BTN:  None

Installation
============
1. Power on the device while attached to the Console port.

2. Halt the U-Boot by pressing Enter when prompted.

3. Set the correct bootcmd for booting OpenWRT:
 > setenv bootargs_owrt "setenv bootargs console=ttyS0,115200"
 > setenv bootcmd "run bootargs_owrt;
   nand read 0x1000000 0x300000 0x800000;
   bootm 0x1000000;"
 > saveenv

5. Rename OpenWRT initramfs image to 'kernel.bin' and place it in a
   TFTP server root-directory served on 192.168.1.2/24. Connect your
   computer to one of the LAN-ports.

4. Boot OpenWRT initramfs image with
 > run bootargs_owrt; tftpboot 0x1000000 192.168.1.2:kernel.bin;
   bootm 0x1000000;

6. (Optional)
   Make a Backup of 'sophos-os1', 'sophos-os2' and 'sophos-data' in case
   you ever want to go back to the vendor firmware.

7. Create Ubi Volume on mtd4 by executing
 > ubiformat /dev/mtd4 -y

8. Transfer OpenWRT sysupgrade image to the device via SCP and install it
   with
 > sysupgrade -n <openwrt-image-file>

Back to Stock
=============
If you want to go back to the stock firmware, here is the bootcmd of the
vendor firmware:
 > setenv bootargs console=ttyS0,115200 root=/dev/mtdblock5;
   nand read 0xc00000 0x00300000  0x100000;
   nand read 0x1000000 0x00400000 0x00800000;
   bootm 0x1000000 - 0xc00000

Set it via 'setenv' from the U-Boot shell and don't forget to save it
using 'saveenv'!

After this, boot the OpenWRT initramfs image just like you would for
installation. Write back the three vendor partitions using mtd. Reboot
the device afterwards.

Signed-off-by: David Bauer <mail@david-bauer.net>
[refresh and reorder patches]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-13 11:31:43 +01:00
Christian Lamparter
85be0f4c21 apm821xx: 4.14: sync config
This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-13 11:31:43 +01:00
Pawel Dembicki
46d4c09bb6 mpc85xx: disable initramfs image in TL-WDR4900
Initramfs image isn't required for this device and regular
initramfs generation isn't work properly. It create not working
binaries.

This patch disable initramfs image for TL-WDR4900.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-01-13 11:31:43 +01:00
Pawel Dembicki
5de6aed42c mpc85xx: add support for Freescale (NXP) P2020RDB
This commit add initial support for Freescale (NXP) P2020RDB

Hardware:
SoC: P2020 2x1GHz
DRAM: 512-1GB DDR3
2 + 4 GBE (2 separate ports and four in VSC7385)
Flash: 16MB NOR, 32MB NAND, 16MB SPI-NOR
PCIE x1 and mPCIE x1
SD Reader

Interfaces:
GBE RJ45 x6
USB2.0 x1
UART x2
I2C x2
JTAG x1
SD x1
PCIE x2 (PCIE and mPCIE)

Flash instructions:
Place sysupgrade image to 0x80000 address in NOR.
Eg. (no brakelines in setenv command):

setenv 'firmware_flash tftpboot $loadaddr $firmwarefile;
 protect off $norfdtaddr +$filesize; erase $norfdtaddr +$filesize;
 cp.b $loadaddr $norfdtaddr $filesize; protect on $norfdtaddr +$filesize;
 cmp.b $loadaddr $norfdtaddr $filesize'
setenv firmwarefile firmware.bin
run firmware_flash

Boot (no brakeline in setenv command):
setenv bootcmd 'setenv bootargs root=/dev/mtdblock3 rw console=$consoledev,
$baudrate rootfstype=squashfs $othbootargs;
bootm $norfdtaddr'
saveenv
boot

Known issues:
-Switch is unmanaged (VSC 7385 is connected via eLBC, driver uses SPI)
-No SD reader support

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [refreshed patches]
2019-01-13 11:31:43 +01:00
Pawel Dembicki
ed2839ac41 kernel/modules: add kmod-pmbus-zl6100 module
This patch adds the kmod packaging for the Intersil / Zilker Labs
ZL6100 and compatible digital DC-DC controllers as well as the
core kernel module for the Power Management Bus.

Add:
kmod-pmbus-core
kmod-pmbus-zl6100

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2019-01-13 11:07:37 +01:00
Hauke Mehrtens
75fdf3ba01 x86: Add support for kernel 4.19
This adds initial support for kernel 4.19 to the x86 target.
The patches and the kernel configurations were copied from kernel 4.14
and then refreshed.

The legacy and the genode target will not support PAE any more because
they use a CPU type which does not support PAE, the generic sub target
still supports PAE.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-12 22:40:36 +01:00
Hauke Mehrtens
f6e0ecdceb x86: Refresh kernel 4.14 configuration
This refreshes the kernel configuration for kernel 4.14.
First this was run for the legacy target:
	make kernel_oldconfig
Then for all targets including the legacy target this was run:
	make kernel_oldconfig CONFIG_TARGET=subtarget
The option CONFIG_104_QUAD_8 was added to the generic configuration
because it would have been automatically removed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-12 22:40:12 +01:00
Hauke Mehrtens
0ea7160abe x86: Use kernel specific subtarget configurations
This makes it possible to use different sub target configurations for
kernel 4.19 for example.
To support kernel 4.9 and kernel 4.14 with the same configuration file
already needed some extra work this will not be needed for kernel 4.19
any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-01-12 22:39:41 +01:00
Hans Dedecker
4bd9d331e5 octeon: fix typo in platform.sh
Fix upgrade typo

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2019-01-12 19:40:13 +01:00
Rafał Miłecki
45ce9897c0 kernel: add bcma fix for subdevices DMA parameters
This fixes bgmac DMA allocations with kernel 4.19.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-01-11 07:33:56 +01:00
Rafał Miłecki
34696ce25e kernel: backport bcma patches that improve printing functions
Updated printing functions use dev_* helpers to provide more meaningful
messages.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-01-10 16:47:43 +01:00
Rafał Miłecki
7175b1356e brcm47xx: backport MIPS fix adding struct device for the SoC
It's needed to:
1) Fix GPIOLIB_IRQCHIP as in 4.19 there is no bcma revert anymore
2) Fix /sys/devices/
3) Fix dma_zalloc_coherent() regression

It still needs a bcma change that will follow later.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-01-10 06:57:19 +01:00
Rafał Miłecki
94561333cd brcm47xx: backport a final/accepted Netgear WNDR3400v3 patch
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2019-01-10 06:35:57 +01:00
Koen Vandeputte
630d8b87a5 cns3xxx: use actual size reads for PCIe
upstream commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(),
which preserved the property of only doing 32-bit reads.

It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
so it changed writes from always being 32 bits to being the actual size,
which works just fine.

Due to:
- The documentation does not mention that only 32 bit access is allowed.
- Writes are already executed using the actual size
- Extensive testing shows that 8b, 16b and 32b reads work as intended

It makes perfectly sense to also swap 32 bit reading in favor of actual size.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-01-07 17:09:06 +01:00
Koen Vandeputte
f56a4e809b kernel: bump 4.14 to 4.14.91
Refreshed all patches.

Removed upstreamed:
- 500-ubifs-Handle-re-linking-of-inodes-correctly-while-re.patch

Compile-tested on: ar71xx, cns3xxx, imx6
Runtime-tested on: ar71xx, cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-01-07 17:09:06 +01:00
Koen Vandeputte
30d518bf16 kernel: bump 4.9 to 4.9.148
Refreshed all patches.

Altered patches:
- 902-debloat_proc.patch

Removed upstreamed:
- 424-v4.20-net-dsa-fix-88e6060-roaming.patch

Compile-tested on: ar7
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-01-07 17:09:06 +01:00
Koen Vandeputte
a18f68ff30 kernel: bump 3.18 to 3.18.131
Refreshed all patches.

Altered patches:
- 902-debloat_proc.patch

Compile-tested on: adm5120
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-01-07 17:09:06 +01:00
John Crispin
93c35bfa21 ramips: whitespace cleanup inside hnat driver
Signed-off-by: John Crispin <john@phrozen.org>
2019-01-07 15:45:51 +01:00
HsiuWen Yen
6b9bdbd493 ramips: add two-way hashing scheme for MT7621
Sometimes the tuples might be hashed to the same FOE entry.
When this hash collision problem occurs, some of the
connections will not be bound and consequently the CPU
idle rate cannot reach 100%. Therefore, two-way hashing
is adopted to alleviate this problem.

Signed-off-by: HsiuWen Yen <y.hsiuwen@gmail.com>
2019-01-07 15:40:51 +01:00
David Bauer
634c733065 ipq40xx: copy Fritz4040 UBoot to STAGING_DIR_IMAGE
Copy U-Boot to STAGING_DIR_IMAGE (and append it to the EVA-image from
there) to fix image generation using the image-builder.

Also remove the bootloader from DEVICE_PACKAGES and instead use the
BUILD_DEVICES directive from within the U-Boot makefile.

This fixes eva-image generation using the OpenWRT image-builder.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-06 12:26:12 +01:00
Christian Lamparter
bbe7ad5a2f mpc85xx: 4.19: refresh kernel config
This patch syncs the 4.19 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-05 23:36:39 +01:00
Christian Lamparter
32420fc6b9 mpc85xx: 4.14: refresh kernel config
This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-05 23:36:39 +01:00
Robert Marko
bba1428274 ipq40xx: 4.14: Sync kernel config
This patch syncs the 4.14 kernel config to the
current generic configuration.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
2019-01-05 22:23:41 +01:00
Robert Marko
0c1f1dab59 ipq40xx: 4.19: Sync kernel config
This patch syncs the 4.19 kernel config since the
KERNEL_STACKPROTECTOR and compiler options are
now part of the 4.19 generic config.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
2019-01-05 22:23:41 +01:00
Christian Lamparter
32e953b821 ipq40xx: fix 4.14 ImageBuilder build woes
Robert Marko reported an issue with the current imagebuilder images:
"Imagebuilder includes the new kmod-usb-dwc3-qcom USB driver
package by default even on 4.14. [...] the current state imagebuilder
can't build images under 4.14 at all as the kmod-usb-dwc3-qcom does
not exist in it so it throws and error and exits."

This patch reverts the Makefile to just kmod-usb-dwc3-of-simple and
once the switch to 4.19 is done. It also removes the
kmod-usb-phy-qcom-dwc3 as they only contain the usb-phy drivers for
the ipq806x generation.

Dynamic switching based on the KERNEL_PATCHVER is possible by using:
   $(if $(filter 4.14,$(KERNEL_PATCHVER)),kmod-usb-dwc3-of-simple,kmod-usb-dwc3-qcom)
though it

Fixes: 13321fa142 ("ipq40xx: Use kmod-usb-dwc3-qcom by default")
Fixes: 6e58fb2c33 ("ipq40xx: kmod-usb-dwc3-of-simple vs kmod-usb-dwc3-qcom")
Reported-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-05 22:23:10 +01:00
Christian Lamparter
3801f8a7f7 apm821xx: MBL: fix kernel/apollo3g.dtb artifact build
The name for the artifact should have been apollo3g.dtb
and not kernel.dtb.

Fixes: 908bdbfce9f9 ("apm821xx: utilize build ARTIFACTs")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-05 22:09:08 +01:00
Pawel Dembicki
36d45e4cdc mpc85xx: add kernel 4.19 support
Copied config from 4.14

Add patches for 4.19

Drop patch 103-powerpc-fix-build-cross32ar.patch,
because issue was fixed in upstream.

Compiled: generic p1020
Compiled and tested: (unofficial) P2020, TP-Link TL-WDR4900

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
2019-01-05 22:09:08 +01:00
Pawel Dembicki
576c69938b mpc85xx: tl-wdr4900-v1: convert to mtdsplit image
Currently, the image creation process for the TP-Link tl-wdr4900-v1
needs a fixed sized kernel and places the rootfs partition at a
fixed offset. With the upcoming move to 4.19 the kernel will no
longer fit into the existing allocated space for the kernel
partition.

This patch converts the device to utilize the established
tplink,firmware mtdsplitter, which can deal with a dynamic
kernel/rootfs size.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
2019-01-05 21:59:52 +01:00
David Bauer
c8115167f9 ath79: add support for devolo WiFi pro 1200i
Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 2T2R
WiFi5: QCA9880 2T2R
BTN:   1x Reset
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to reset-button

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-05 21:55:22 +01:00
David Bauer
8d68be8057 ath79: add support for devolo WiFi pro 1750i
Hardware
--------
CPU:   Qualcomm Atheros QCA9558
RAM:   128M DDR2
FLASH: 16MiB
ETH:   1x Atheros AR8035 (PoE in)
WiFi2: QCA9558 3T3R
WiFi5: QCA9880 3T3R
BTN:   1x Reset
LED:   1x LED blue
       1x LED red
BEEP:  1x GPIO attached piezo beeper
UART:  3.3V GND TX RX (115200-N-8) (3.3V is square pad)
       Header is located next to reset-button

Installation
------------
Make sure you set a password for the root user as prompted on first
setup!

1. Upload OpenWRT sysupgrade image via SSH to the device.
Use /tmp as the destination folder on the device.
User is root, password the one set in the web interface.

2. Install OpenWRT with

> sysupgrade -n -F /tmp/<openwrt-image-name>

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-01-05 21:55:22 +01:00
Anton Arapov
6ba58b7b02 ramips: cleanup the RB750Gr3 support
Always enable the pwr led and use the usr led for boot status indication.

Rename nodes in the dts, to match what is recommend in the devicetree
specification.

Increase the maximum spi frequency to 20MHz and drop the m25p,chunked-io
which isn't required on mt7621.

Use the BTN_0 keycode for the mode button. This board doesn't have any
wireless.

Use a more descriptive label for the reset button and the GPIO enabling
the usb vcc supply.

Use the beeper kernel module for the buzzer.

Fix the pinmux to switch only pins used as GPIOs to the GPIO function.
Add support for the PoE enable GPIO to the userspace. The PoE power
status can be read via GPIO7. Since OpenWrt doesn't have support for
reading inputs from userspace, prepare only the pinmux for the GPIO.

Signed-off-by: Anton Arapov <arapov@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-05 12:28:22 +01:00
Anton Arapov
52f2d7d2a9 ramips: add RB750Gr3 native support
This patch adds support of MikroTik RouterBOARD 750Gr3, without the need
to reflashing the bootloader.

Installation through RouterBoot follows the usual MikroTik method
https://openwrt.org/toh/mikrotik/common

Since the image isn't compatible with RouterBOARD 750Gr3 installations
which have replaced the bootloader, the former used userspace boardname
is not added to the SUPPORTED_DEVICES, to prevent a brick while trying
to upgrade to the image with native support.

Signed-off-by: Anton Arapov <arapov@gmail.com>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2019-01-05 12:28:22 +01:00
Paul Wassi
eb1887be93 ath79: merge cases in 02_network
Merge some duplicate cases in /etc/board.d/02_network

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2019-01-02 22:36:27 +01:00
Alberto Bursi
9c4f903999 x86: enable kmod-bnx2 on 64-bit by default
Gigabit ethernet adapters using BCM5706/5708/5709/5716 chipset are
common on servers and as easy/cheap to get as Intel based ones.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2019-01-02 22:12:19 +01:00
Roger Pueyo Centelles
359f5e5390 kernel: mtd: add support for EN25QH64 in spi-nor.c
The Eon EN25QH64 is a 64 Mbit SPI NOR flash memory chip. Its 32, 128 and
256 Mbits siblings are supported upstream but this particular size wasn't.
This commit includes patches for kernels 4.14 and 4.19.

Tested on a COMFAST CF-E120A v3 (ath79).

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
2019-01-02 22:12:19 +01:00
Christoph Krapp
59b99e1924 ath79: align GL-AR750S boardname to other GL.iNet devices
As the official device name is GL-AR750S, rename the board accordingly.

Signed-off-by: Christoph Krapp <achterin@googlemail.com>
2019-01-01 19:42:41 +01:00
Christian Lamparter
257de1b01f apm821xx: sata: boot-part feature integration
This patch adds the boot-part feature to the apm82181 sata target.
This makes it possible to configure the boot partition size with
the generic CONFIG_TARGET_KERNEL_PARTSIZE symbol.

Please note: For people using custom images: Just like with
CONFIG_TARGET_ROOTFS_PARTSIZE changing the value can cause
sysupgrade to repartition the device!

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-01 16:39:59 +01:00
Christian Lamparter
7d009d8e6a apm821xx: use bin file extension for sysupgrade-tar images
Use the file extension bin for sysupgrade-tar images with
metadata to unify the file extension across the target/tree.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-01 16:39:59 +01:00
Christian Lamparter
2271967f57 apm821xx: utilize build ARTIFACTs
The exported kernel dtbs can be build as artifacts.
This way, the MyBook Live's DTB is not generated twice.

While at it, give the artifacts their proper name.
For the wndr4700 use the "device-tree" partition name and
for the MyBook Live: "apollo3g.dtb" to match the mbl_boot.scr.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-01 16:39:59 +01:00
INAGAKI Hiroshi
51fe956c4f ipq806x: add support for Buffalo WXR-2533DHP
Buffalo WXR-2533DHP is a 2.4/5 GHz band 11ac router, based on Qualcomm
IPQ8064.

The U-Boot on WXR-2533DHP employs a complicated dual firmware
protection scheme against corruptions of the kernel and rootfs
images. See the notes in buffalo.sh for details.

specifications:

- Qualcomm IPQ8064 (384 - 1,400 MHz, 2C2T)
- 512 MB of RAM (DDR3)
- 256 MB of Flash (NAND)
- 4T4R 2.4/5 GHz Wlan (QCA9980)
- 5x 10/100/1000 Mbps Ethernet
- 10x LEDs, 8x keys (6x buttons, 2x slide-switches)
- 2x USB 3.0 Type-A
- 12VDC/4A AC Adapter
- UART through-hole on PCB
  - J3: Vcc, GND, TX, RX from USB port side
  - 115200n8

Boot instructions for the initramfs image:

1. Prepare the TFTP server with the initramfs image renamed to
   "wxr2300dhp-initramfs.uImage" and IP address "192.168.11.10".
2. Press the "AOSS" button while powering on the WXR-2533DHP.
3. Wait until the "Wireless" LED flashes before releasing the AOSS button.
   The WXR-2533DHP will grab the image from TFTP server and will boot it.

Flashing instructions:

To persistently write the firmware, flash an openwrt sysupgrade image
from inside the initramfs, for example transfer
via `scp <sysupgrade> root@192.168.1.1:/tmp` and flash on the device
with `sysupgrade -n /tmp/<sysupgrade>`. Then wait ~120 seconds to
let it finish the flashing process.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded message]
2019-01-01 16:39:59 +01:00
INAGAKI Hiroshi
250f5ec139 ipq806x: add ramdisk feature
This commits adds the "ramdisk" feature to ipq806x target. The
main driving force behind this decision is to facilitate the
installation of OpenWrt on some locked IPQ806x devices.

Examples:

- NEC Aterm WG2600HP

  The U-Boot on WG2600HP is protected with a password which prevents
  users from gaining access to the u-boot prompt in order to install
  the images from there.

  Therefore, on this device, installing OpenWrt by the user involves
  changing the bootcmd as follows so that WG2600HP downloads and
  executes initramfs image from TFTP server.

  ex.:
    bootcmd="ping ${serverip} && tftpboot 0x44000000 wg2600hp-initramfs.bin; bootipq"

- Buffalo WXR-2533DHP

  The U-Boot on WXR-2533DHP has built-in firmware recovery mode.
  It's activated by holding the "AOSS" button during boot. This
  will trigger the device to download the firmware from an TFTP
  server and booting from it. By using this, the user  can the
  install OpenWrt firmware without having access to the UART
  console.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [reworded commit]
2019-01-01 15:40:13 +01:00
Christian Lamparter
6734753ef4 kernel: Add missing symbols to 4.19
Tested with apm82181 and ipq40xx minimal image versions.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-01-01 15:40:13 +01:00
Paul Wassi
54e3ee0215 ath79: fix case statement in 01_leds
Fix a missing 'end-of-case' recently introduced in 01_leds

Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2019-01-01 01:38:51 +01:00
Mathias Kresin
8c485fbb25 ath79: rework elecom-header recipe
Replace the code with a more readable version. Rename the recipe
to reflect the real usecase.

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-12-31 16:48:49 +01:00