Commit Graph

293 Commits

Author SHA1 Message Date
Hauke Mehrtens
d3a8a62692 wireless-regdb: Make it build with python2
This backports a patch to build it work with python2 in addition to
python3.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Petr Štetiar <ynezz@true.cz>
2019-11-21 23:47:35 +01:00
Andre Heider
1bf1490eeb
am33x-cm3: remove
This is currently unused and not working anyway, since the used upstream
kernel loads am335x-pm-firmware.elf and not am335x-pm-firmware.bin [0].

The last downstream patches using the latter were removed with e4eef7e6.

Remove it instead of fixing it since the rtc-only sleep state can even
damage the hardware [1].

[0] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ccbbb9faac946ce61c241ce9f08b3486fabf031d
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=7a6cb0abe1aa63334f3ded6d2b6c8eca80e72302

Signed-off-by: Andre Heider <a.heider@gmail.com>
2019-11-20 10:49:01 +01:00
Zoltan HERPAI
32287b3913 firmware: intel-microcode: bump to 20190918
* New upstream microcode datafile 20190918

      *Might* contain mitigations for INTEL-SA-00247 (RAMBleed), given
      the set of processors being updated.
  * Updated Microcodes:
      sig 0x000306d4, pf_mask 0xc0, 2019-06-13, rev 0x002e, size 19456
      sig 0x000306f4, pf_mask 0x80, 2019-06-17, rev 0x0016, size 18432
      sig 0x00040671, pf_mask 0x22, 2019-06-13, rev 0x0021, size 14336
      sig 0x000406f1, pf_mask 0xef, 2019-06-18, rev 0xb000038, size 30720
      sig 0x00050654, pf_mask 0xb7, 2019-07-31, rev 0x2000064, size 33792
      sig 0x00050657, pf_mask 0xbf, 2019-08-12, rev 0x500002b, size 51200
      sig 0x00050662, pf_mask 0x10, 2019-06-17, rev 0x001c, size 32768
      sig 0x00050663, pf_mask 0x10, 2019-06-17, rev 0x7000019, size 24576
      sig 0x00050664, pf_mask 0x10, 2019-06-17, rev 0xf000017, size 24576
      sig 0x00050665, pf_mask 0x10, 2019-06-17, rev 0xe00000f, size 19456

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-11-10 23:39:29 +01:00
Zoltan HERPAI
db09335848 firmware: intel-microcode: bump to 20190618
* Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223
    CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091
  * Updated Microcodes:
    sig 0x000206d6, pf_mask 0x6d, 2019-05-21, rev 0x061f, size 18432
    sig 0x000206d7, pf_mask 0x6d, 2019-05-21, rev 0x0718, size 19456

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-11-10 12:20:03 +01:00
Zoltan HERPAI
9a16bcfd79 firmware: intel-microcode: bump to 20190514
* New Microcodes:
    sig 0x00030678, pf_mask 0x02, 2019-04-22, rev 0x0838, size 52224
    sig 0x00030678, pf_mask 0x0c, 2019-04-22, rev 0x0838, size 52224
    sig 0x00030679, pf_mask 0x0f, 2019-04-23, rev 0x090c, size 52224
    sig 0x000406c3, pf_mask 0x01, 2019-04-23, rev 0x0368, size 69632
    sig 0x000406c4, pf_mask 0x01, 2019-04-23, rev 0x0411, size 68608
    sig 0x00050657, pf_mask 0xbf, 2019-02-27, rev 0x5000021, size 47104
    sig 0x000806e9, pf_mask 0x10, 2018-10-18, rev 0x009e, size 98304
    sig 0x000806eb, pf_mask 0xd0, 2018-10-25, rev 0x00a4, size 99328
    sig 0x000806ec, pf_mask 0x94, 2019-02-12, rev 0x00b2, size 98304
    sig 0x000906ec, pf_mask 0x22, 2018-09-29, rev 0x00a2, size 98304
    sig 0x000906ed, pf_mask 0x22, 2019-02-04, rev 0x00b0, size 97280

  * Updated Microcodes:
    sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288
    sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336
    sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552
    sig 0x000306d4, pf_mask 0xc0, 2019-03-07, rev 0x002d, size 19456
    sig 0x000306e4, pf_mask 0xed, 2019-03-14, rev 0x042e, size 16384
    sig 0x000306e7, pf_mask 0xed, 2019-03-14, rev 0x0715, size 17408
    sig 0x000306f2, pf_mask 0x6f, 2019-03-01, rev 0x0043, size 34816
    sig 0x000306f4, pf_mask 0x80, 2019-03-01, rev 0x0014, size 18432
    sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504
    sig 0x00040661, pf_mask 0x32, 2019-02-26, rev 0x001b, size 25600
    sig 0x00040671, pf_mask 0x22, 2019-03-07, rev 0x0020, size 14336
    sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352
    sig 0x000406f1, pf_mask 0xef, 2019-03-02, rev 0xb000036, size 30720
    sig 0x00050654, pf_mask 0xb7, 2019-04-02, rev 0x200005e, size 32768
    sig 0x00050662, pf_mask 0x10, 2019-03-23, rev 0x001a, size 32768
    sig 0x00050663, pf_mask 0x10, 2019-03-23, rev 0x7000017, size 24576
    sig 0x00050664, pf_mask 0x10, 2019-03-23, rev 0xf000015, size 23552
    sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456
    sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408
    sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360
    sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352
    sig 0x000506f1, pf_mask 0x01, 2019-03-21, rev 0x002e, size 11264
    sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728
    sig 0x000806e9, pf_mask 0x10, 2019-04-01, rev 0x00b4, size 98304
    sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000806ea, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000806eb, pf_mask 0xd0, 2019-03-30, rev 0x00b8, size 98304
    sig 0x000806ec, pf_mask 0x94, 2019-03-30, rev 0x00b8, size 97280
    sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304
    sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328
    sig 0x000906ec, pf_mask 0x22, 2019-02-14, rev 0x00ae, size 98304
    sig 0x000906ed, pf_mask 0x22, 2019-03-17, rev 0x00b8, size 97280
  * Implements MDS mitigation (RIDL, Fallout, Zombieload), INTEL-SA-00223
    CVE-2018-12126, CVE-2018-12127, CVE-2018-12130, CVE-2019-11091

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2019-11-10 12:19:59 +01:00
Koen Vandeputte
f96af28272 ath10k-firmware: update Candela Tech firmware images
The release notes since last time for wave-1:

  *  October 5,  2019:  Fix too-short msg caused by invalid use of PayloadLen in receive path.
                        This appears to resolve the issue of getting (and ignoring) too-short commands
                        when we detect loss of CE interrupts and go into polling mode.

  *  October 12, 2019:  Fix regression in IBSS mode that caused SWBA overrun issues.  Related to
                        regression added during the ct-station logic, specifically TSF allocation.
                        Thanks for Ahmed Zaki @ Mage-Networks for helping to diagnose and test.

  *  October 15, 2019:  Only send beacon tx completion events if we can detect CT driver is being
                        used (based on CT_STATS_OK flag being set).  This should help CT firmware work
                        better on stock driver.

The release notes since last time for wave-2:

  *  October 15, 2019:  Only send beacon tx completion events if we can detect CT driver is being
                        used (based on ATH10k_USE_TXCOMPL_TXRATE2 | ATH10k_USE_TXCOMPL_TXRATE1 flags being set).
                        This should help CT firmware work better on stock driver.

  *  October 31, 2019:  Compile out peer-ratecode-list-event.  ath10k driver ignores the event.

  *  November 1, 2019:  Fix rate-ctrl related crash when nss and other things were changed while
                        station stays associated.  See bug: https://github.com/greearb/ath10k-ct/issues/96

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-11-05 15:43:22 +01:00
David Bauer
641a93f0f2 ath10k-firmware: update wave 1 firmware to 10.2.4-1.0-00047
This fixes frequent crashes observed on a UniFi AC Mesh using OpenWrt
master and 19.07. 18.06 seems not affected from our testing.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-27 17:56:23 +01:00
David Bauer
a3914783a3 ath10k-firmware: retrieve wave 1 firmware from kvalo
This commit changes the source of the Wave 1 ath10k-firmware
from linux-firmware to Kall Valos ath10k-firmware repository.

This is necessary as the firmware selected in linux-firmware produces
frequent crashes in some circumstances.

This patch can be removed as soon as linux-firmware carries
10.2.4-1.0-00047 firmware.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-27 14:51:24 +01:00
David Bauer
c0f4078164 ipq-wifi: add AVM FRITZ!Repeater 1200 bdf
Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-23 01:17:28 +02:00
David Bauer
7a577e9a59 firmware: add Realtek RTL8822BE/RTL8822CE firmware
This commit adds packages for the Realtek RTl8822BE/RTL8822CE firmware
to be used with the rtw88 driver.

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-10-22 09:16:24 +02:00
Robert Marko
7c930990af ath10k-firmware: update Candela Tech firmware images
This enables a feature flag in the wave-2 firmware wmi-services indicating it can send
software-encrypted raw frames.  This should in turn allow the AP-VLAN feature to work.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2019-09-15 22:56:09 +02:00
John Crispin
63c722c0be linux-firmware: add mediatek BT firmware
Signed-off-by: John Crispin <john@phrozen.org>
2019-08-30 07:27:51 +02:00
Koen Vandeputte
bd926fdde5 ath10k-firmware: update Candela Tech firmware images
This should fix a problem with 1560 MTU, 160Mhz on DFS channels,
some other small issues on < 5.2 kernels, and for 5.2 driver,
it pulls in some upstream stable fixes.

wave-1 firmware changes since last update:

  *  June 24, 2019: Try allocating low-priority WMI msgs if high-prio are not available.

  *  June 24, 2019: Init rate-ctrl to start at lowest rate instead of in the middle.  Hoping
                    this helps DHCP when station connects from a long distance.

wave-2:

  *  June 24, 2019  Start rate-ctrl at minimal values to help DHCP work better for far-away peers.

  *  July 24, 2019  Fix old regression that made /a (and probably /b/g) perform poorly, at least on
                    diet-compiled images.

  *  Aug 8, 2019  Improve a/b/g rate-ctrl by damping the PER swings caused by the all-or-nothing logic
                  of transmitting non-block-ack frames one at a time.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2019-08-27 10:32:44 +02:00
Hauke Mehrtens
9cdb4753be linux-firmware: intel: Use recent version of wifi firmware
iwlwifi from the new backports also supports more recent FW versions,
update to the most recent versions for already supported devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-08-18 22:17:35 +02:00
Christian Lamparter
8f757d427c ipq-wifi: drop upstreamed custom board-2.bin
The BDFs for the:
	ALFA Network AP120C-AC
	ASUS Lyra
	AVM FRITZ!Box 7530
	AVM FRITZ!Repeater 3000
	EnGenius EAP1300
	EnGenius ENS620EXT
	Netgear Orbi Pro SRK60

boards were upstreamed to the ath10k-firmware repository
and linux-firmware.git.

Furthermore the BDFs for the:
	OpenMesh A42 specific BDFs
	OpenMesh A62 specific BDFs
	Linksys EA6350v3
have been updated.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-08-18 20:56:41 +02:00
Christian Lamparter
4d34216ea5 linux-firmware: update to 20190815
Update linux-firmware to 20190815

git log --pretty=oneline --abbrev-commit 20190815..20190815

07b925b Install only listed firmware files
5621bfc rtw88: add a README file
7e431c5 rtw88: RTL8822C: add WoW firmware v7.3
2dc7023 rtw88: RTL8822C: update rtw8822c_fw.bin to v7.3
d3d000d Merge branch 'ath10k-20190808' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
d3e17e9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
d3f7234 Merge commit '70af908f4ad7aa8bc65032253f99a0a4fbe1e6c3' of https://github.com/Netronome/linux-firmware
1f0a99f ath10k: QCA9984 hw1.0: update board-2.bin
49c1187 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00046
1031f01 ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00045
cf714a2 ath10k: QCA9888 hw2.0: update board-2.bin
81e2e77 ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00040
8dc2dfb ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00045
1bd3ef2 ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00140-QCARMSWPZ-1
e043109 ath10k: QCA4019 hw1.0: update board-2.bin
b1e26aa cxgb4: update firmware to revision 1.24.3.0
70af908 nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.10.A.38
dff98c6 Merge branch 'master' of git://github.com/skeggsb/linux-firmware
580b076 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware
f9b0071 Merge tag 'iwlwifi-fw-2019-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
2a3b75d nvidia: add missing entries in WHENCE
6fc1eb1 linux-firmware: Update NXP Management Complex firmware to version 10.16.2
cd6cb7b iwlwifi: update -48 FWs for Qu and cc
b5f09bb iwlwifi: update FWs for 3168, 7265D, 9000, 9260, 8000, 8265 and cc
bf13a71 Merge branch 'guc_v33' of git://anongit.freedesktop.org/drm/drm-firmware
d52556e linux-firmware: Update firmware file for Intel Bluetooth AX201
dbcc2fb linux-firmware: Update firmware file for Intel Bluetooth 22161
a5ee415 linux-firmware: Update firmware file for Intel Bluetooth 9560
7444ca4 linux-firmware: Update firmware file for Intel Bluetooth 9260
3d1e553 amdgpu: update vega10 VCE firmware
5d4e3cc amdgpu: update picasso vcn firmware
6a45d9e amdgpu: update raven vcn firmware
9c8161f amdgpu: update tonga to latest 19.20 firmware
7b6c49c amdgpu: update vega12 to latest 19.20 firmware
4f7b71b amdgpu: partially revert 2579167548be33afb1fe2a9a5c141561ee5a8bbe
fd3cc24 amdgpu: update vega10 to latest 19.20 firmware
c190efa amdgpu: update polaris12 to latest 19.20 firmware
f42b54e amdgpu: update raven2 to latest 19.20 firmware
fc89ce8 amdgpu: update raven to latest 19.20 firmware
3bebb5a amdgpu: update picasso to latest 19.20 firmware
05dbae6 drm/i915/firmware: Add v33 of GuC for ICL
786f17a drm/i915/firmware: Add v33 of GuC for KBL
aae0eb5 drm/i915/firmware: Add v33 of GuC for SKL
9cf240f drm/i915/firmware: Add v33 of GuC for GLK
8a0a6a6 drm/i915/firmware: Add v33 of GuC for BXT
70e4394 linux-firmware: rsi: add firmware image for redpine 9116 chipset
fd69a5d linux-firmware: Add firmware file for Intel Bluetooth AX201
7ae3a09 Merge tag 'iwlwifi-fw-2019-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
90e6845 iwlwifi: add new firmwares for integrated 22000 series
71ef30c iwlwifi: update FW for 22000 to Core45-96
e58cbf7 iwlwifi: update FWs for 9000 series to Core45-96
b443218 iwlwifi: update Core45 FWs for 22260, 9000 and 9260
5157165 iwlwifi: udpate -36 firmware for 8000 series

This commit was created with the help of the make-package-update-commit.sh script.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-08-18 20:56:41 +02:00
Petr Štetiar
b6bae4a2c9 wireless-regdb: fix build when python2 from package feeds exists
wireless-regdb fails to build if there is python2 installed from package
feeds, as staging_dir/hostpkg/bin/python is python2 and
staging_dir/hostpkg/bin takes precedence over staging_dir/host/bin
(proper place with python -> python3 symlink) which leads to the build
failure of wireless-regdb, so this patch makes it explicit which python
should be used.

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tested-by: Russell Senior <russell@personaltelco.net>
Tested-by: Lucian Cristian <lucian.cristian@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-08-04 22:09:20 +02:00
Álvaro Fernández Rojas
b0b5424378 linux-firmware: fix RPi 4 NVRAM
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-08-03 08:16:10 +02:00
Kevin Darbyshire-Bryant
12840674d0 wireless-regdb: fix patch fuzz
Refresh patches to tidy up some fuzz warnings

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-07-30 09:42:05 +01:00
John Crispin
8562e77953 wireless-regdb: fix Makefile indentation
Signed-off-by: John Crispin <john@phrozen.org>
2019-07-30 00:33:12 +02:00
Petr Štetiar
57d1c05ec9 wireless-regdb: set PKGARCH:=all
As it's an architecture-independent binary file.

Ref: https://github.com/openwrt/openwrt/pull/1521#issuecomment-514687053
Suggested-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Petr Štetiar
d3853d17a3 wireless-regdb: prefer python provided by make variable
Usage of predefined make variables is preferred.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2019-07-26 08:09:16 +02:00
Zachary Riedlshah
ef3f868da0 wireless-regdb: update to 2019.06.03
Fixes build issues on a python3 host (issues with the print statement
formatting in the current build).

Includes 100-regdb-write-firmware-file-format-version-code-20.patch and
other fixes.

Closes bugs.openwrt.org/index.php?do=details&task_id=1605.

Uses the tarball as requested.

Signed-off-by: Zachary Riedlshah <git@zacharyrs.me>
2019-07-26 08:09:16 +02:00
Yangbo Lu
df0d555ea5 layerscape: convert to python3 for rcw
Python 2.7 will not be maintained past 2020. Let's convert
to python3 for rcw. Also drop byte swapping since TF-A had
been already used which handled byte swapping instead.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-07-26 08:09:16 +02:00
Álvaro Fernández Rojas
9e8932c17f brcm2708: switch to linux-firmware SDIO NVRAM
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-14 12:44:14 +02:00
Álvaro Fernández Rojas
aa00ac44d9 linux-firmware: add RPi SDIO NVRAM packages
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2019-07-14 12:44:14 +02:00
Hauke Mehrtens
7c640c2960 ath10k-firmware: Fix mirror hash
Fixes: 7f79882d44 ("ath10k-firmware: update board-2.bin for community firmwares")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2019-07-07 17:37:06 +02:00
Christian Lamparter
7f79882d44 ath10k-firmware: update board-2.bin for community firmwares
This patch updates the board-2.bin for the default
IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct
and -ct-htt firmwares.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-07-07 13:02:05 +02:00
Christian Lamparter
629e6538a1 linux-firmware: update to 20190618
Update linux-firmware to 20190618.

git log --pretty=oneline --abbrev-commit 20190416..20190618

acb56f2 cavium: Add firmware for CNN55XX crypto driver.
a03f1a0 linux-firmware: Update firmware file for Intel Bluetooth 22161
abb7cb6 linux-firmware: Update firmware file for Intel Bluetooth 9560
1e8253b linux-firmware: Update firmware file for Intel Bluetooth 9260
c436aaf linux-firmware: Update AMD SEV firmware
6ae3652 linux-firmware: update licence text for Marvell firmware
1884732 linux-firmware: update firmware for mhdp8546
87b35ca linux-firmware: rsi: update firmware images for Redpine 9113 chipset
55edf52 imx: sdma: update firmware to v3.5/v4.5
93d56c0 nvidia: update GP10[2467] SEC2 RTOS with the one already used on GP108
1f8ebdf linux-firmware: Update firmware file for Intel Bluetooth 8265
bccb385 linux-firmware: Update firmware file for Intel Bluetooth 9260
29a536a linux-firmware: Update firmware file for Intel Bluetooth 9560
cedd500 linux-firmware: Update firmware file for Intel Bluetooth 22161
e04cc56 amlogic: add video decoder firmwares
95a9353 iwlwifi: update -46 firmwares for 22260 and 9000 series
68040ce iwlwifi: add firmware for 22260 and update 9000 series -46 firmwares
fdfb153 iwlwifi: add -46.ucode firmwares for 9000 series
92e17d0 amdgpu: update vega20 to the latest 19.10 firmware
7536c3b amdgpu: update vega12 to the latest 19.10 firmware
2579167 amdgpu: update vega10 to the latest 19.10 firmware
4ea5c73 amdgpu: update polaris11 to the latest 19.10 firmware
4475802 amdgpu: update polaris10 to the latest 19.10 firmware
f9551dc amdgpu: update raven2 to the latest 19.10 firmware
9eaa40d amdgpu: update raven to the latest 19.10 firmware
3c1ab75 amdgpu: update picasso to the latest 19.10 firmware
8e3e08c linux-firmware: update fw for qat devices
cdef971 Mellanox: Add new mlxsw_spectrum firmware 13.2000.1122
13d6bc8 drm/i915/firmware: Add ICL HuC v8.4.3238
1dbb095 drm/i915/firmware: Add ICL GuC v32.0.3
77b6b40 drm/i915/firmware: Add GLK HuC v03.01.2893
f8521cc drm/i915/firmware: Add GLK GuC v32.0.3
9fb9526 drm/i915/firmware: Add KBL GuC v32.0.3
3fbec60 drm/i915/firmware: Add SKL GuC v32.0.3
c7e32a1 drm/i915/firmware: Add BXT GuC v32.0.3

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-06-22 13:17:48 +02:00
Petko Bordjukov
1e2e5c66ed kernel: package Broadcom BNX2X driver
bnx2x driver support for the x86 architecture. Includes module and
firmware for Broadcom QLogic 5771x/578xx 10/20-Gigabit ethernet
adapters.

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[added +kmod-lib-zlib-inflate as well]
2019-06-20 20:02:29 +02:00
Kevin Darbyshire-Bryant
ff2382e36c ath10k-firmware: update Candela Tech firmware images
wave-1:

2019-05-09: Tweak rate-ctrl:  Ramp PER up faster, down slower.  This
	    helps throughput in rate-vs-range test, especially with
	    nss1.

2019-05-20: Disable adaptive-CCA.  I am not sure it helps, and it may
	    make it slower to detect noise that should tell the system
	    to stop transmitting.  If someone has means to test this
	    properly, I'd be happy to work with them.

wave-2:

2019-05-15: Fix problem where rate-ctrl sometimes used rix of 0x0.

2019-05-15: Allow raw-tx of encrypted frame.  Requires a patch to the
	    driver to use raw mode when skb has WEP flag enabled AND
	    skb is flagged to not be encrypted.  Lightly tested.

2019-05-16: Fix tx-hang that happened when rate-ctrl chose an OFDM rate
	    for 20Mhz and sent that as AMPDU.  To fix, limit to (V)HT
	    rates if peer is (V)HT.  It seems that MCS0 (V)HT20 should
	    have as good of a chance of being detected as CCK or OFDM.

2019-06-06: Disable TX-BFEE, TX-BFER for IBSS connections.  I suspect
	    this is part of the tx-hang issue seen with IBSS between
	    two 9984 radios.

2019-06-12: Fix rx-rate reporting in 'fw_stats' logic.  This was at
	    least partly due to regressions I had added earlier when
	    working on some multi-vdev enhancements.

2019-6-12: Fix case where extd peer-stats were not always populated.
	   The stats gathering code did not handle error conditions
	   well.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2019-06-13 19:35:19 +01:00
Yangbo Lu
8468bf04d0 layerscape: drop ppa package
Drop ppa package since TF-A is used instead.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:09 +02:00
Biwen Li
c07d3302b3 layerscape: convert to use TF-A for firmware
This patch is to convert to use TF-A for firmware.
- Use un-swapped rcw since swapping will be done in TF-A.
- Use u-boot with TF-A defconfig.
- Rework memory map for TF-A introduction.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:09 +02:00
Biwen Li
f7f1f39c34 layerscape: add rcw packages for ls1043ardb/ls1046ardb SD boot
Add rcw packages for ls1043ardb/ls1046ardb SD boot.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
fbb865099b layerscape: update ppfe-firmware to LSDK 19.03
Update ppfe-firmware to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
f4f4b053b9 layerscape: update ls-rcw to LSDK 19.03
Update ls-rcw to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
584611e076 layerscape: update ls-mc to LSDK 19.03
Update to ls-mc to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
1efc6f3515 layerscape: update ls-dpl to LSDK 19.03
Update ls-dpl to LSDK 19.03.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Biwen Li
5dd307afef layerscape: update fman-ucode to LSDK 19.03
The source code was same from lsdk-1806 to lsdk-1903.

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2019-06-06 15:40:08 +02:00
Jeff Kletsky
819e7946b0 ipq40xx: Add support for Linksys EA8300 (Dallas)
The Linksys EA8300 is based on QCA4019 and QCA9888 and provides three,
independent radios. NAND provides two, alternate kernel/firmware
images with fail-over provided by the OEM U-Boot.

Installation:

  "Factory" images may be installed directly through the OEM GUI.

Hardware Highlights:

  * IPQ4019 at 717 MHz (4 CPUs)
  * 256 MB NAND (Winbond W29N02GV, 8-bit parallel)
  * 256 MB RAM
  * Three, fully-functional radios; `iw phy` reports (FCC/US, -CT):
      * 2.4 GHz radio at 30 dBm
      * 5 GHz radio on ch. 36-64 at 23 dBm
      * 5 GHz radio on ch. 100-144 at 23 dBm (DFS), 149-165 at 30 dBm
      #{ managed } <= 16, #{ AP, mesh point } <= 16, #{ IBSS } <= 1
      * All two-stream, MCS 0-9
  * 4x GigE LAN, 1x GigE Internet Ethernet jacks with port lights
  * USB3, single port on rear with LED
  * WPS and reset buttons
  * Four status lights on top
  * Serial pads internal (unpopulated)

  "Linksys Dallas WiFi AP router based on Qualcomm AP DK07.1-c1"

Implementation Notes:

  The OEM flash layout is preserved at this time with 3 MB kernel and
  ~69 MB UBIFS for each firmware version. The sysdiag (1 MB) and
  syscfg (56 MB) partitions are untouched, available as read-only.

Serial Connectivity:

  Serial connectivity is *not* required to flash.

  Serial may be accessed by opening the device and connecting
  a 3.3-V adapter using 115200, 8n1. U-Boot access is good,
  including the ability to load images over TFTP and
  either run or flash them.

  Looking at the top of the board, from the front of the unit,
  J3 can be found on the right edge of the board, near the rear

      |
   J3 |
  |-| |
  |O| | (3.3V seen, open-circuit)
  |O| | TXD
  |O| | RXD
  |O| |
  |O| | GND
  |-| |
      |

Unimplemented:

    * serial1 "ttyQHS0" (serial0 works as console)
    * Bluetooth; Qualcomm CSR8811 (potentially conected to serial1)

Other Notes:

    https://wikidevi.com/wiki/Linksys_EA8300 states

        FCC docs also cover the Linksys EA8250. According to the
	RF Test Report BT BR+EDR, "All models are identical except
	for the EA8300 supports 256QAM and the EA8250 disable 256QAM."

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
2019-05-18 13:43:54 +02:00
Jeff Kletsky
4bdc873a5f firmware/ipq-wifi: Extend for multi-chip boards
This package provides board-specific reference ("cal") data
on an interim basis until included in the upstream distros

While originally conceived for IPQ4019-based boards, similar needs
are appearing with three-radio devices. For some of these devices,
both a board-2.bin file needs to be supplied both for the IPQ4019
as well as for the other radio on the board.

This patch allows new or multiple overrides to be specified by:

  * Adding board name to ALLWIFIBOARDS
  * Placing file(s) in this directory named as
      board-<devicename>.<qca4019|qca9888|qca9984>
  * Adding
      $(eval $(call generate-ipq-wifi-package,<device>,<display name>))

(along with suitable package selection for the board)

At this time, QCA4019, QCA9888, and QCA9984 are supported.
Extension to other chips should be straightforward.

The existing files, board-*.bin, are "grandfathered" as QCA4019.

The package name has been retained for compatability reasons.
At this time it DEPENDS:=@TARGET_ipq40xx, limiting its visibility.

Build-tested-on: asus_map-ac2200, alfa-network_ap120c-ac,
    avm_fritzbox-7530, avm_fritzrepeater-3000, engenius_eap1300,
    engenius_ens620ext, linksys_ea6350v3, qxwlan-e2600ac-c1/-c2

Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
2019-05-18 13:43:22 +02:00
Deng Qingfang
172b02c05f linux-firmware: update to 20190416
Update linux-firmware to 20190416, which includes updated firmwares e.g. for ath10k
Also switch to official tarball source.

The following firmware files we use are updated in this change:
ath10k/QCA6174/hw3.0/board-2.bin
ath10k/QCA9888/hw2.0/firmware-5.bin
ath10k/QCA988X/hw2.0/firmware-5.bin
ath10k/QCA9984/hw1.0/firmware-5.bin
mrvl/sd8887_uapsta.bin
mrvl/pcie8897_uapsta.bin
iwlwifi-8000C-36.ucode
iwlwifi-8265-36.ucode

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
2019-05-14 21:59:38 +02:00
Robert Marko
61f4ceb146 ath10k-firmware: update Candela Tech firmware images
Release notes since last time:

Release notes for wave-1:

2019-04-02: Support some get/set API for eeprom rate power tables.
	    Mostly backported from 10.2

2019-04-02: Support adaptive-CCA, backported from 10.2

2019-04-02: Support adding eeprom configAddr pairs via the
            set-special API. These configAddrs can be used to change
            the default register settings for up to 12 registers.

2019-05-03: Fix tx-power settings for 2x2, 3x3 rates.
	    Original logic I put in back in 2016 set 2x2 and 3x3 lower
	    than the needed to be when using most NICs (very high
	    powered NICs would not have been affected I think, not sure
	    any of those exist though.)

	    This improves throughput for 2x2 and 3x3 devices,
	    especially when the signal is weaker.

Release notes for wave-2:

2019-04-08: When setting keys, if high bit of high value of
	    key_rsc_counter is set to 0x1, then the lower 48 bits will
	    be used as the PN value.  By default, PN is set to 1 each
	    time the key is set.

2019-04-08: Pack PN into un-used 'excretries' aka
	    'num_pkt_loss_excess_retry' high 16 bits.
	    This lets us report peer PN, but *only* if driver has
	    previously set a PN when setting key (or set-special cmd is
	    used to enable PN reporting).

	    This is done so that we know the driver is recent
            enough to deal with the PN stat reporting.

2019-04-16: Support specifying tx rate on a per-beacon packet.
	    See ath10k_wmi_op_gen_beacon_dma and
	    ath10k_convert_hw_rate_to_rate_info for API details.

	     Driver needs additional work to actually enable this
	     feature currently.

2019-04-30: Compile out tx-prefetch caching logic.
	    It is full of tricky bugs that cause tx hangs.
	    I fixed at least one, but more remain and I have wasted too
	    much time on this already.

2019-05-08: Start rate-ctrl at mcs-3 instead of mcs-5.
	    This significantly helps DHCP happen quickly, probably
	    because the initial rate being too high would take a while
	    to ramp down, especially since there are few packets sent
	    by the time DHCP needs to start.

	    This bug was triggered by me decreasing retries of 0x1e
	    (upstream default) to 0x4.  But, I think it is better to
	    start with lower initial MCS instead of always having a
	    very high retry count.

Tested on 8devices Jalapeno dev board(IPQ4019)

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [neatify]
2019-05-11 16:37:11 +02:00
Christian Lamparter
fbe2e7d15e ath10k-firmware: update Candela Tech firmware images
Release notes since last time:

Release notes for wave-1 / 10.1:
2019-03-28: Fix sometimes using bad TID for management frames
	    in htt-mgt mode. (Backported from wave2, looks
	    like bug would be the same though.)

Release notes for wave-2 / 10.4:
2019-03-28: Fix off-channel scanning while associated in
	    proxy-station mode.

2019-03-29: Fix sometimes sending mgt frames on wrong tid when
	    using htt-mgt. This bug has been around since I first
	    enabled htt-mgt mode.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-03-30 10:36:31 +01:00
Christian Lamparter
f803ee3ba9 ath10k-firmware: update Candela Tech firmware images
Release notes since last time:

Release notes for wave-1:

- 2019-03-12: Add btcoex feature flag for 2.4Ghz only adapters,
	      backported from upstream 10.2 firmware.

- 2019-03-12: Support offloading decrypt of PMF blockack frames
	      to the host. This lets us do blockack with PMF and
	      rx-sw-crypt. Normal hwcrypt scenarios would not need this.

Release notes for wave-2:

- 2019-03-12: Fix crash when tearing down VI TID when pending frames
	      exist. Could reproduce this while doing rmmod when VI
	      traffic was flowing and PMF was enabled but broken.
	      Bad luck could rarely cause it to happen in more normal
	      config too.

- 2019-03-12: Support offloading decrypt of PMF blockack frames to
	      the host.  This lets us do blockack with PMF and
	      rx-sw-crypt. Normal hwcrypt scenarios would not need this.

- 2019-03-12: Re-work problematic patch that attempted to fix transmit
	      on non-QOS tids. It appears buggy in several ways,
	      hopefully improved now.  This was introduced last fall.
	      See github bug 78.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-03-25 21:19:39 +01:00
Steve Glennon
dc4f6b896f ipq40xx: add support for EnGenius ENS620EXT
Hardware
--------
CPU:   Qualcomm IPQ4018
RAM:   256M
FLASH: 32M SPI NOR W25Q256
ETH:   QCA8075
WiFi2: IPQ4018 2T2R 2SS b/g/n
WiFi5: IPQ4018 2T2R 2SS n/ac
LED:    - Power amber
        - LAN1(PoE) green
        - LAN2 green
        - Wi-Fi 2.4GHz green
        - Wi-Fi 5GHz green
BTN:    - WPS
UART:  115200n8 3.3V J1
       VCC(1) - GND(2) - TX(3) - RX(4)

Added basic support to get the device up and running for a sysupgrade
image only.
There is currently no way back to factory firmware, so this is a one-way
street to OpenWRT.
Install from factory condition is convoluted, and may brick your device:
1) Enable SSH and disable the CLI on the factory device from the web user
   interface (Management->Advanced)
2) Reboot the device
3) Override the default, limited SSH shell:
   a) Get into the ssh shell:
      ssh admin@192.168.1.1 /bin/sh --login
   b) Change the dropbear script to disable the limited shell. At the
      empty command prompt type:
        sed -i '/login_ssh/s/^/#/g’ dropbear
        /etc/init.d/dropbear restart
        exit
4) ssh in to a (now-) normal OpenWRT SSH session
5) Flash your built image
   a) scp openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin
      admin@192.168.1.1:/tmp/
   b) ssh admin@192.168.1.1
   c) sysupgrade -n
      /tmp/openwrt-ipq40xx-engenius_ens620ext-squashfs-sysupgrade.bin
6) After flash completes (it may say "Upgrade failed" followed by
   "Upgrade completed") and device reboots, log in to newly flashed
   system. Note you will now need to ssh as root rather than admin.

Signed-off-by: Steve Glennon <s.glennon@cablelabs.com>
[whitespace fixes, reordered partitions, removed rng node from 4.14,
fixed 901-arm-boot-add-dts-files.patch]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-03-21 00:57:54 +01:00
David Bauer
148d29d47b ipq40xx: add support for AVM FRITZ!Repeater 3000
Hardware
--------
CPU:   Qualcomm IPQ4019
RAM:   256M (NANYA NT5CC128M16JR-EK)
FLASH: 128M NAND (Macronix MX30LF1G18AC-XKI)
ETH:   Qualcomm QCA8072
WiFi2: IPQ4019 2T2R 2SS b/g/n
WiFi5: IPQ4019 2T2R 2SS n/ac
WiFi5: QCA9984 4T4R 4SS n/ac
LED:    - Connect green/blue/red
        - Power green
BTN:   WPS/Connect
UART:  115200n8 3.3V
       VCC - RX - TX - GND (Square is VCC)

Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz3000'
   subdirectory. Place it in the same directory as the 'eva_ramboot.py'
   script. It is located in the 'scripts/flashing' subdirectory of the
   OpenWRT tree.

2. Assign yourself the IP address 192.168.178.10/24. Connect your
   Computer to one of the boxes LAN ports.

3. Connect Power to the Box. As soon as the LAN port of your computer
   shows link, load the U-Boot to the box using following command.

   > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz3000.bin

4. The U-Boot will now start. Now assign yourself the IP address
   192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
   server root directory and rename it to 'FRITZ3000.bin'.

5. The Box will now boot OpenWRT from RAM. This can take up to two
   minutes.

6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
   scp. SSH into the Box and first write the Bootloader to both previous
   kernel partitions.

   > mtd write /path/to/uboot-fritz3000.bin uboot0
   > mtd write /path/to/uboot-fritz3000.bin uboot1

7. Remove the AVM filesystem partitions to make room for our kernel +
   rootfs + overlayfs.

   > ubirmvol /dev/ubi0 --name=avm_filesys_0
   > ubirmvol /dev/ubi0 --name=avm_filesys_1

8. Flash OpenWRT peristently using sysupgrade.

   > sysupgrade -n /path/to/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-03-13 16:25:35 +01:00
Piotr Dymacz
6ee73942f9 ipq-wifi: update ALFA Network AP120C-AC board-2.bin
Add specific 'variant' for 'bus=ahb,bmi-chip-id=0,bmi-board-id=25' BDF.
Use the same value ('ALFA-Network-AP120C-AC') as sent upstream.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2019-03-08 19:28:31 +01:00
Michael Yartys
fc2fd1c9d6 ath10k-firmware: update Candela Tech firmware images
Release notes since last update:

wave-1 firmware:

*  Feb 14, 2019:  Remove logic that causes assert when swba logic is not
                  initialized. This was seen when trying to bring up 6 VAP
                  vdevs. A similar fix went into wave-2 firmware some time
                  ago.

*  Feb 27, 2019:  Support up to 32 vAP vdevs, fix stack corruption when
                  driver requests too many vAP.

*  Feb 28, 2019:  Support beacon-tx-wmi callback message. This lets driver
                  properly clean up beacon buffers so we don't crash
                  (somethings the entire OS/system) due to DMA errors.

wave-2 firmware:

*  Feb 27. 2019:  Support up to 32 AP vdevs. Previous to this, stack would
                  be corrupted if you went past 16 AP vdevs.

*  Feb 28, 2019:  Support beacon-tx-wmi callback message. This lets driver
                  properly clean up beacon buffers. In wave-1, this could
                  crash the entire OS, but I didn't see the same crashes
                  in wave-2, so maybe it is fixed in some other way. Add
                  the feature regardless as it seems proper.

Signed-off-by: Michael Yartys <michael.yartys@gmail.com>
2019-03-06 21:58:59 +01:00
David Bauer
95b0c07a61 ipq40xx: add support for FritzBox 7530
Hardware
--------
CPU:   Qualcomm IPQ4019
RAM:   256M
FLASH: 128M NAND
ETH:   QCA8075
VDSL:  Intel/Lantiq VRX518 PCIe attached
       currently not supported
DECT:  Dialog SC14448
       currently not supported
WiFi2: IPQ4019 2T2R 2SS b/g/n
WiFi5: IPQ4019 2T2R 2SS n/ac
LED:    - Power/DSL green
        - WLAN green
        - FON/DECT green
        - Connect/WPS green
        - Info green
        - Info red
BTN:    - WLAN
        - FON
        - WPS/Connect
UART:  115200n8 3.3V (located under the Dialog chip)
       VCC - RX - TX - GND (Square is VCC)

Installation
------------
1. Grab the uboot for the Device from the 'u-boot-fritz7530'
   subdirectory. Place it in the same directory as the 'eva_ramboot.py'
   script. It is located in the 'scripts/flashing' subdirectory of the
   OpenWRT tree.

2. Assign yourself the IP address 192.168.178.10/24. Connect your
   Computer to one of the boxes LAN ports.

3. Connect Power to the Box. As soon as the LAN port of your computer
   shows link, load the U-Boot to the box using following command.

   > ./eva_ramboot.py --offset 0x85000000 192.168.178.1 uboot-fritz7530.bin

4. The U-Boot will now start. Now assign yourself the IP address
   192.168.1.70/24. Copy the OpenWRT initramfs (!) image to a TFTP
   server root directory and rename it to 'FRITZ7530.bin'.

5. The Box will now boot OpenWRT from RAM. This can take up to two
   minutes.

6. Copy the U-Boot and the OpenWRT sysupgrade (!) image to the Box using
   scp. SSH into the Box and first write the Bootloader to both previous
   kernel partitions.

   > mtd write /path/to/uboot-fritz7530.bin uboot0
   > mtd write /path/to/uboot-fritz7530.bin uboot1

7. Remove the AVM filesystem partitions to make room for our kernel +
   rootfs + overlayfs.

   > ubirmvol /dev/ubi0 --name=avm_filesys_0
   > ubirmvol /dev/ubi0 --name=avm_filesys_1

8. Flash OpenWRT peristently using sysupgrade.

   > sysupgrade -n /path/to/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
[removed pcie-dts range node, refreshed on top of AP120-AC/E2600AC]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2019-02-28 11:32:55 +01:00