Commit Graph

1242 Commits

Author SHA1 Message Date
Javier Marcet
018ada5403 base-files: upgrade: fix efi partitions size calculation
We were missing (not using) the last sector of each partition,
compared with the output of gparted.

Signed-off-by: Javier Marcet <javier@marcet.info>
[moved the dot]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-12-27 13:51:41 +01:00
Florian Eckert
dd681838d3 base-files: fix service_running check
The following command checks if a instance of a service is running.
/etc/init.d/<service> running <instance>

 In the variable `$@`, which is passed to the function
`service_running`, the first argument is always the `instance` which
should be checked. Because all other variables where removed from `$@`
with `shift`.

Before this change the first argument of `$@` was set to the `$service`
Variable. So the function does not work as expected. The `$service`
variable was always the instance which should be checked. This is not
what we want.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
2021-12-04 09:39:11 +09:00
Enrico Mioso
57c1f3f9c5
base-files: add eMMC sysupgrade support
Adds generic support for sysupgrading on eMMC-based devices.

Provide function emmc_do_upgrade and emmc_copy_config to be used in
/lib/upgrade/platform.sh instead of redundantly implementing the same
logic over and over again.
Similar to generic sysupgrade on NAND, use environment variables
CI_KERNPART, CI_ROOTPART and newly introduce CI_DATAPART to indicate
GPT partition names to be used. On devices with more than one MMC
block device, CI_ROOTDEV can be used to specify the MMC device for
partition name lookups.

Also allow to select block devices directly using EMMC_KERN_DEV,
EMMC_ROOT_DEV and EMMC_DATA_DEV, as using GPT partition names is not
always an option (e.g. when forced to use MBR).

To easily handle writing kernel and rootfs make use of sysupgrade.tar
format convention which is also already used for generic NAND support.

Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
CC: Li Zhang <li.zhang@gl-inet.com>
CC: TruongSinh Tran-Nguyen <i@truongsinh.pro>
2021-12-02 20:42:58 +00:00
Robert Marko
f2c4064ecb base-files: dont always create kernel UBI volume
Currently nand_upgrade_tar() will pass the kernel length
to nand_upgrade_prepare_ubi() in all cases except for when
the kernel is to be installed in a separate partition as a
binary with the MTD tool.

While this is fine for almost all cases newer MikroTik NAND
devices like hAP ac3 require the kernel to be installed as a
UBIFS packed UBI volume in its own partition.

So, since we have a custom recipe to use ubiformat to flash
the kernel in its partition it makes no sense for sysupgrade
to also install the kernel as a UBI volume in the "ubi"
partition as it only wastes space and will never be used.

So, simply check whether CI_KERNPART is set to "none" and
if so unset the "has_kernel" variable which will in turn
prevent the kernel length from being passed on and then
the kernel UBI volume wont be created for no usefull purpose.

The ath79 MikroTik NAND target has been setting CI_KERNPART
to "none" for a while now altough that was not preventing
the kernel to be installed as UBI volume as well.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2021-11-28 17:17:22 +01:00
Daniel Golle
4d3303b1bd
base-files: stage2: improve /proc/*/stat parser
Simply reading /proc/*/stat as a space-separated string will not work
as the process name may itself contain spaces. Hence we must match on
the '(' and ')' characters around the process name and can then handle
the remaining string as space-separated values.
This fixes shell error messages which have been popping up the console
due to spaces in process names being interpreted as field separators.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-11-13 18:36:52 +00:00
Daniel Golle
73657dfbdd
base-files: drop get_partition_by_name shell function
find_mmc_part provides a better alternative and all users of
get_partition_by_name have been removed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-11-01 18:01:02 +00:00
Daniel Golle
9f223a20bd
base-files: allow specifiying rootdev for find_mmc_part
Some devices got more than one mmc device.
Allow specifying the root device as 2nd parameter of find_mmc_part so
scripts can avoid matching irrelevant partitions on wrong mmc device.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-11-01 18:00:42 +00:00
Davide Fioravanti
6e13794344 base-files: add minimal mmc support
Added minimal mmc support for helper functions:

 - find_mmc_part: Look for a given partition name. Returns the
	coresponding partition path
 - caldata_extract_mmc: Look for a given partition name and then
	extracts the calibration data
 - mmc_get_mac_binary: Returns the mac address from a given partition
	name and offset

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
[replace dd with caldata_dd, moved sysupgrade mmc to orbi]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-11-01 00:56:51 +01:00
Daniel Golle
b2aca61360
base-files, metadata: support additional group membership
Some packages may require additional group membership for the system
user added by that package. Allow defining additional groups as third
member of the ':'-separated tuple, allowing to specify multiple
','-separated groups with optional GID.

Example:
USERID:=foouser=1000:foogroup=1000:addg1=1001,addg2=1002,addg3

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-10-28 16:27:21 +01:00
Deomid Ryabkov
430f691943 base-files: chmod 1777 /var/lock
Per FHS 3.0, /var/lock is the location for lock files [1].
However its current permissions (755) are too restrictive
for use by unprivileged processes.
Debian and Ubuntu set them to 1777, and now so do we.

[1] <https://refspecs.linuxfoundation.org/FHS_3.0/fhs-3.0.html#varlockLockFiles>

Signed-off-by: Deomid Ryabkov <rojer@rojer.me>
[fixed typo in commit message, had to remove "rojer" due to git hooks]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2021-10-23 19:30:54 +02:00
Daniel Golle
98bccdafd7
base-files: rename 'sdcard' to 'legacy-sdcard'
While an image layout based on MBR and 'bootfs' partition may be easy
to understand for users who are very used to the IBM PC and always have
the option to access the SD card outside of the device (and hence don't
really depend on other recovery methods or dual-boot), in my opinion
it's a dead end for many desirable features on embedded systems,
especially when managed remotely (and hence without an easy option to
access the SD card using another device in case things go wrong, for
example).

Let me explain:

* using a MSDOS/VFAT filesystem to store kernel(s) is problematic, as a
  single corruption of the bootfs can render the system into a state
  that it no longer boots at all. This makes dual-boot useless, or at
  least very tedious to setup with then 2 independent boot partitions
  to avoid the single point of failure on a "hot" block (the FAT index
  of the boot partition, written every time a file is changed in
  bootfs). And well: most targets even store the bootloader environment
  in a file in that very same FAT filesystem, hence it cannot be used
  to script a reliable dual-boot method (as loading the environment
  itself will already fail if the filesystem is corrupted).

* loading the kernel uImage from bootfs and using rootfs inside an
  additional partition means the bootloader can only validate the
  kernel -- if rootfs is broken or corrupted, this can lead to a reboot
  loop, which is often a quite costly thing to happen in terms of
  hardware lifetime.

* imitating MBR-boot behavior with a FAT-formatted bootfs partition
  (like IBM PC in the 80s and 90s) is just one of many choices on
  embedded targets. There are much better options with modern U-Boot
  (which is what we use and build from source for all targets booting
  off SD cards), see examples in mediatek/mt7622 and mediatek/mt7623.

Hence rename the 'sdcard' feature to 'legacy-sdcard', and prefix
functions with 'legacy_sdcard_' instead of 'sdcard_'.

Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-16 12:22:17 +01:00
Stijn Tintel
8347d8b4fb base-files: add generic sdcard upgrade method
Add a generic sdcard upgrade method instead of duplicating code in yet
another target, and add a feature flag to only install this upgrade
method in targets that set this flag. Copied from mvebu.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-08-07 01:34:40 +03:00
Daniel Golle
e67865c569
base-files: upgrade: try umount lvm and loop devices
Try umount on device mapper and loop devices still mounted, so the
subsequent call to disactivate all physical volumes and delete all
loop devices is more likely to succeed.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-04 19:12:34 +01:00
Daniel Golle
af76e26b55
base-files: sysupgrade stage2: fix losetup detection
If the busybox applet losetup was selected, `command -v` selects that
during sysupgrade. As this applet is in another path and doesn't cover
the '-D' option which is used to make sure user-defined loop devices
are no longer active during sysupgrade.
Detect losetup at the path of the full utility to avoid error messages
in case of the busybox applet being selected.

Reported-by: fda77 <fda77@users.noreply.github.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-08-03 18:28:44 +01:00
Bob Cantor
e8b5429609 base-files: wifi: tidy up the reconf code
commit 5edbd390d321532d9a697d6895a1a7c71c40bd5d rearranged the
"wifi up" code.

This commit tidies up the "wifi reconf" code so as to
keep it aligned with the "wifi up" code.

branches affected: trunk, 21.02

Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
2021-06-28 17:24:15 +02:00
Bob Cantor
b82cc80713 base-files: wifi: swap the order of some ubus calls
"/sbin/wifi up" makes three ubus calls:
1. ubus call network reload
2. ubus call network.wireless down
3. ubus call network.wireless up

The first and third ubus calls call drv_mac80211_setup,
while the second ubus call triggers wireless_device_setup_cancel,
so the call sequence becomes,

1. drv_mac80211_setup
2. wireless_device_setup_cancel
3. drv_mac80211_setup

This commit swaps the order of the first two ubus calls,
1. ubus call network.wireless down
2. ubus call network reload
3. ubus call network.wireless up

Consequently drv_mac80211_setup is only called once,
and two related bugs (#FS3784 and #FS3902) are no longer triggered
by /sbin/wifi.

branches affected: trunk, 21.02

Signed-off-by: Bob Cantor <coxede6557@w3boats.com>
2021-06-28 17:24:11 +02:00
Paul Spooren
56bdb6bb97 base-files: fix /tmp/TZ when zoneinfo not installed
The zoneinfo packages are not installed per default so neither
/tmp/localtime nor /tmp/TZ is generated.

This patch mostly reverts the previous fix and instead incooperates a
solution suggested by Jo.

Fixes "base-files: fix zoneinfo support " 8af62ed

Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-06-24 20:00:20 -10:00
Rosen Penev
8af62ede18 base-files: fix zoneinfo support
The system init script currently sets /tmp/localinfo when zoneinfo is
populated. However, zoneinfo has spaces in it whereas the actual files
have _ instead of spaces. This made the if condition never return true.

Example failure when removing the if condition:

/tmp/localtime -> /usr/share/zoneinfo/America/Los Angeles

This file does not exist. America/Los_Angeles does.

Ran through shfmt -w -ci -bn -sr -s

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2021-06-23 14:10:27 -10:00
Luiz Angelo Daros de Luca
fe6b9b0588 base-files: bring up vlan interface too
Vlan subinterface was never brought up when using vlan-based preinit network.
Tested forcing ifname="" before preinit_ip() on a Tp-Link Archer C5v4.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
2021-06-22 23:23:00 +02:00
Hauke Mehrtens
790561d510 base-files: failsafe: Remove the VLAN modifier from interface name
Some interfaces have a VLAN modifier like :t in lan1:t, this modifier
should be removed from the interface before calling preinit_ip_config().

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-06-22 23:23:00 +02:00
Hauke Mehrtens
467cd378db base-files: failsafe: Fix IP configuration
Adapt the preinit_config_board() to the board.json network changes. It
now looks for the device and the ports variables to configure the LAN
network.

This works with swconfig configurations.

Fixes: FS#3866
Fixes: d42640e389 ("base-files: use "ports" array in board.json network for bridges")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
2021-06-22 23:23:00 +02:00
Karel Kočí
cc7316d1e9 base-files: fix enabled for services with only STOP
There are services that have only STOP value set. They are executed only
on shutdown and it is common to use them for system cleanup. There is
one such service shipped directly with base-files, it is 'umount'. Those
work the same way as those with START but enabled does not report them
as enabled although it should have as they can be enabled and disabled
as any other service.

This also changes check from check for executable to check for symbolic
link. The implementation depends on those being links to service file
and it is much cleaner and direct to check for them being links.

Signed-off-by: Karel Kočí <karel.koci@nic.cz>
2021-06-22 09:45:27 -10:00
Florian Eckert
40f533b73e base-files: redirect kill ouptut for ash, telnetd and dropbear
If one of the programmes is not running, then we see the following
output in the logs.

`killall: telnetd: no process killed`

To ensure that the log is clean, redirect the output to /dev/null

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-06-20 15:15:32 -10:00
Florian Eckert
d8bfcc59b0 base-files: remove unused vn and _vn function
The remaining vn calls have been ported to v.
Therefore, these functions are no longer needed and will be removed.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-06-20 15:15:32 -10:00
Florian Eckert
42d78fedfb base-files: change logging for upgrade on stage2
Remove vn call in favour of v call. This commit serves as preparation
for removing the vn function call.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-06-20 15:15:32 -10:00
Florian Eckert
bb2b7156a4 base-files: add syslog logging for v function
The logging output should not only be displayed in the calling shell
session but also in the syslog. A sysupgrade and a configuration
import, export can thus be traced in the syslog.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-06-20 15:15:32 -10:00
Chuck Fan
d374e2cdb4 base-files: upgrade: use zcat command provided by busybox
Calling `switch_to_ramfs()` will not copy the gzip executable
(/bin/gzip) to ramfs, but `/bin/zcat` will call `/bin/gzip` when
package gzip is installed, instead of the busybox-supplied zcat.
This will cause `zcat` to fail to find `gzip`, then cause the
sysupgrade to fail. Adding the `busybox` prefix here will solve
the problem.

Signed-off-by: Chuck Fan <fanck0605@qq.com>
2021-06-20 14:19:54 -10:00
Sergey Ponomarev
bffee5ea19 busybox: disable bzip2
bzip2 adds about 8kb of size. For tiny builds it's often disabled.
It's not directly used by stock OpenWrt programs.
Kernel images compressed with bzip2 are also not fully supported.

Signed-off-by: Sergey Ponomarev <stokito@gmail.com>
[fix \ indention]
Signed-off-by: Paul Spooren <mail@aparcar.org>
2021-06-20 14:17:49 -10:00
Rafał Miłecki
946019637e base-files: fix typo in config_generate MAC check
Fixes: 8d8eb9d13fc6 ("base-files: set MAC for bridge ports (devices) instead of bridge itself")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-06-14 22:29:49 +02:00
Rafał Miłecki
c8d8eb9d13 base-files: set MAC for bridge ports (devices) instead of bridge itself
This restores the original config_generate behaviour. With MAC set for
bridged devices the bridge automatically gets its MAC adjusted (it picks
the lowest MAC of bridged devices).

This fixes confusing interfaces setup (bridge ports not having custom
MAC assigned).

Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Fixes: e002179a6d ("base-files: simplify setting device MAC")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-06-14 20:24:46 +02:00
Michael Pratt
b118aba8cb base-files: upgrade: use procd to kill managed daemons
These processes are managed by procd and set to start again when killed
via the procd instance parameter "respawn" being set during init.

Example:
procd_set_param respawn 3600 1 0

When they are killed manually during sysupgrade,
they are started again in 5 seconds or less, depending on
how the "respawn" parameter is set.

Use procd through ubus to disable the instances that respawn them,
however, allow dnsmasq, netifd, and logd to restart for remote logging.

Properly closing all these processes increases free memory by about 3 MB,
which should help low memory devices upgrade without crashing.

For very low memory devices (set to 32 MB for now)
also kill dnsmasq, netifd, and logd for an additional 3 MB of free memory.

Also, bump sleep values to allow at least 10 seconds
for network interfaces and daemons
to come up after they are killed and restarted
before caches are dropped.

Signed-off-by: Michael Pratt <mcpratt@pm.me>
2021-06-12 13:59:27 -10:00
Rafał Miłecki
e002179a6d base-files: simplify setting device MAC
1. Move code above interface generation
   It results in more logical order. Device gets its config section
   above interface section.
2. Drop the loop
   We have separated code handling bridges now so $device should be
   guaranteed to contain a single device name.
3. Drop section name
   It's not required by netifd or LuCI & it's not needed by this script
   as $device contains a single device name now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-28 15:35:32 +02:00
Rafał Miłecki
4b9a67362d base-files: generate network config with "device" options
Replace "ifname" with "device" as netifd has been recently patches to
used the later one. It's more clear and accurate.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-27 10:58:49 +02:00
INAGAKI Hiroshi
8cc4e87a2f base-files: fix configuration generation of network if "bridge" exists
After the commit 43fc720657
("base-files: generate "device UCI type section for bridge"), the wrong
network configuration is generated for the devices that already have the
bridge device section for VLAN, such as the devices in realtek target.

As a result, the bridge device by additional "device" section is
specified to the "ports" option in the "bridge-vlan" section and netifd
shuts down the switch and the ethernet when the network service started.

Fixes: 43fc720657 ("base-files: generate "device" UCI type section for bridge")
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
[rmilecki: use $ports for generate_bridge_vlan argument]
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-24 09:09:00 +02:00
Rafał Miłecki
7a90ad3c43 base-files: support setting bridge MAC address
Fixes: 43fc720657 ("base-files: generate "device" UCI type section for bridge")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-24 07:48:17 +02:00
Rafał Miłecki
80be798d4a Revert "base-files: migrate old UCI network bridge ports syntax"
This reverts commit f716c30241.

Migrating everyone to the new syntax could break downgrades. We may
reintroduce it way later if needed.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-20 12:25:25 +02:00
Rafał Miłecki
0e459668c5 base-files: generate bridge device sections with br- name prefix
Missing br- prefix could result in name conflict between DSA port
interface and bridge interface. Some devices with just one LAN port use
"lan" interface name for DSA port. Trying to create bridge with the same
"lan" name was failing.

Reported-by: David Bauer <mail@david-bauer.net>
Fixes: 43fc720657 ("base-files: generate "device" UCI type section for bridge")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-20 10:40:59 +02:00
Rafał Miłecki
f716c30241 base-files: migrate old UCI network bridge ports syntax
netifd has been recently patched to use more accurate "ports" option
instead of "ifname". This is a simple translation between two UCI
options.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-18 20:07:56 +02:00
Rafał Miłecki
43fc720657 base-files: generate "device" UCI type section for bridge
This switches from the old way of defining bridges in an "interface" UCI
section type (that should be used for layer 3 only). From now a defualt
board switch will have its own "device" UCI section type. It's a new &
preferred way of defining L2 devices.

Before:

config interface 'lan'
        option type 'bridge'
        option ifname 'lan1 lan2 lan3 lan4'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'

After:

config device
        option name 'lan'
        option type 'bridge'
        list ports 'lan1'
        list ports 'lan2'
        list ports 'lan3'
        list ports 'lan4'

config interface 'lan'
        option ifname 'lan'
        option proto 'static'
        option ipaddr '192.168.1.1'
        option netmask '255.255.255.0'

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-18 20:07:51 +02:00
Rafał Miłecki
d42640e389 base-files: use "ports" array in board.json network for bridges
Bridge aggregates multiple ports so use a more accurate name ("ports")
and format (array) for storing them in board.json.

Example:

"network": {
	"lan": {
		"ports": [
			"lan1",
			"lan2",
			"lan3",
			"lan4"
		],
		"protocol": "static"
	},
	"wan": {
		"ifname": "wan",
		"protocol": "dhcp"
	}
}

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2021-05-18 12:30:16 +02:00
Florian Eckert
e0c6506158 base-files: change logging for upgrade on fwtool
Remove vn call in favour of v call. This commit serves as preparation
for removing the v function call.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
[alter slightly to prevent double space after colon]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-05-17 01:00:14 +02:00
Jo-Philipp Wich
75ea878d1b base-files: shinit: properly handle dashes in service names
Fixes: FS#3801
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2021-05-12 12:44:32 +02:00
Daniel Golle
a2b9ec0231
base-files: upgrade: take down loop and LVM before upgrade
Users of devices with large block storage may choose to have an LVM
partition on the same device which is used for booting OpenWrt.
The presents a problem during sysupgrade as the root device is then
still busy and changing partitions will not work as desired,
leading to data corruption in case the newly flashed image is larger
than the currently installed one.
Having loop devices setup causes similar havoc.
Make sure all volume groups are offline and all loop devices have been
released before sysupgrade.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-05-05 13:18:43 +01:00
Alexander Egorenkov
9318f61556 base-files: fix status display command
If service() is called w/o parameter then the status display for services
with multiple instances is incorrect. E.g. samba4 or wpad have 2 instances.

root@OpenWrt:~# /etc/init.d/samba4 status
running
root@OpenWrt:~# /etc/init.d/wpad status
running

Before change:
/etc/init.d/samba4                 enabled         stopped
/etc/init.d/wpad                   enabled         stopped

After change:
/etc/init.d/samba4                 enabled         running
/etc/init.d/wpad                   enabled         running

Signed-off-by: Alexander Egorenkov <egorenar-dev@posteo.net>
2021-04-03 18:56:02 +02:00
Daniel Golle
bb107ad9c1
base-files: functions: introduce new helper functions
Introduce cmdline_get_var() to /lib/function.sh and make use of it in
export_rootdev() in /lib/upgrade/common.sh, making the code more
simple and removing one level of indentation.
Introduce get_partition_by_name() to /lib/upgrade/common.sh which is
useful on non-EFI GPT platforms like mt7622.
Remove some dead-code while at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-03-31 16:53:39 +01:00
Florian Eckert
fdbdbe8eaa base-files: add logging for configuration import
Make sysupgrade backup import more verbose.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-03-21 22:45:20 +01:00
Adrian Schmutzler
85b1f4d8ca treewide: remove execute bit and shebang from board.d files
So far, board.d files were having execute bit set and contained a
shebang. However, they are just sourced in board_detect, with an
apparantly unnecessary check for execute permission beforehand.

Replace this check by one for existance and make the board.d files
"normal" files, as would be expected in /etc anyway.

Note:

This removes an apparantly unused '#!/bin/sh /etc/rc.common' in
target/linux/bcm47xx/base-files/etc/board.d/01_network

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-03-06 11:30:06 +01:00
Florian Eckert
dec14ac436 base-files: add new application led trigger backend
For now we have only kernel LED trigger support. With this change it is now
possible to use application triggers.

If we configure a LED with a non kernel trigger, then we check on every
restart and boot of the LED service if we have this trigger as an application
in "/usr/libexec/led-trigger". If this file with the name is found, then we
execute this to init the LED.

Possible use cases are:

- Start/Stop/Restart an application led trigger service for this led
- Init a LED that is configured by a hotplug script (VPN tunnel established)

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2021-03-05 00:10:06 -10:00
Daniel Golle
84a339f015 base-files: add support for restoring config from tmpfs
Instead of only relying in /sysupgrade.tgz being present in rootfs to
restore configuration, also grab /tmp/sysupgrade.tar which may have
magically gotten there during preinit...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-28 00:09:09 +00:00
Daniel Golle
287bd78e6f
base-files: remove unneeded '$' signs in nand.sh
When using Shell arithmetric evaluation via $((..)) the variables in
the expression do not need to be prefixed by the '$' sign.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2021-02-24 11:42:02 +00:00