Commit Graph

3247 Commits

Author SHA1 Message Date
John Audia
b6443367d8 kernel: bump 5.4 to 5.4.52
update_kernel.sh refreshed all patches, no human interaction was needed

Build system: x86_64
Run-tested: Netgear R7800 (ipq806x)

Signed-off-by: John Audia <graysky@archlinux.us>
2020-07-17 11:00:33 +02:00
Mathieu Martin-Borret
96761ecc2f kernel: mtdsplit_uimage: add SGE parser
Adding SGE parser for SGE (T&W) Shenzhen Gongjin Electronics
to add 96 bytes padding the the firmware image

Signed-off-by: Mathieu Martin-Borret <mathieu.mb@protonmail.com>
2020-07-13 22:45:04 +02:00
John Audia
039fd27173 kernel: bump 5.4 to 5.4.51
update via update_kernel.sh -v -u 5.4

Removed upstreamed patches:
 350-MIPS-Add-missing-EHB-in-mtc0-mfc0-sequence-for-DSPen.patch

Script refreshed patches:
 902-debloat_proc.patch
 904-debloat_dma_buf.patch

Attempted merge conflict in following patches:
 0024-MIPS-lantiq-revert-DSA-switch-driver-PMU-clock-chang.patch

Build system: x86_64
Build tested: ipq806x (Netgear R7800)

Signed-off-by: John Audia <graysky@archlinux.us>
[fixed sha256sum of the tarball]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-07-11 13:33:28 +02:00
Thibaut VARÈNE
78fffc2dfd generic: platform/mikrotik: add partial AR71xx cpufreq support
This patch adds cpu frequency setting for AR724x and AR7161.
It is unknown if all the AR71xx devices support the same value range,
so support is only enabled for AR7161 at this stage.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-07-08 16:07:05 +02:00
Thibaut VARÈNE
a874c87f4c generic: platform/mikrotik: add board_revision tag
Tag was discovered exploring the hard_config of a "r2" board.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-07-08 16:07:05 +02:00
Thibaut VARÈNE
0217a9be0d generic: platform/mikrotik: graceful fallback for cpufreq_index
The current code would return an error on ath79 when the SoC isn't known
to the driver. Return the raw hex value instead, as happens with non
supported targets.
Also return the correctly incremented value from
sc_tag_cpufreq_ath79_arraysize()

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-07-08 16:07:05 +02:00
Thibaut VARÈNE
2714a4faab generic: platform/mikrotik: match RouterBOOT nomenclature
RouterBOOT cpu frequency settings are letter-indexed. Follow the
same logic for the sysfs interface.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-07-08 16:07:05 +02:00
Thibaut VARÈNE
5c4b431a3c generic: platform/mikrotik: fix routerboot_tag_show_u32s()
The routine would only accurately print out the first word.

Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Fixes: 5ecf7d96 ("generic: routerboot sysfs platform driver")
2020-07-08 16:07:05 +02:00
Hauke Mehrtens
68d9cb8214 kernel: Update kernel 5.4 to version 5.4.50
Run tested: ath79, ipq40xx
Build tested: ath79, ipq40xx

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
Hauke Mehrtens
6062d85892 kernel: Update kernel 4.19 to version 4.19.131
Fixes:
- CVE-2020-10757

The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was
backported which needed some adaptations to other code.

Run tested: ath79
Build tested: ath79

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
Hauke Mehrtens
ce958dd88a kernel: Update kernel 4.14 to version 4.14.187
Fixes:
- CVE-2020-10757

The "mtd: rawnand: Pass a nand_chip object to nand_release()" commit was
backported which needed some adaptations to other code.

Build tested: ramips

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2020-07-04 21:12:42 +02:00
Hauke Mehrtens
4bb5e331a7 kernel: Fix ath79 DSP exception at bootup
This resolves a hazard between a mtc0 and a mfc0 instruction after
activating the DSP support. Without this fix the CPU could use the old
value again and the DSP support would not be active.

Fixes: FS#2928, FS#2899
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ath79/tl-wdr3600; ath79/tl-wdr4300]
Tested-by: David Bauer <mail@david-bauer.net> [ocedo_koala/ocedo_raccoon]
2020-07-04 16:04:21 +02:00
Kevin Darbyshire-Bryant
d59dc14515 kernel: cake: backport upstream tweaks & fixes
From upstream:
b8392808eb3f sch_cake: add RFC 8622 LE PHB support to CAKE diffserv handling
3f608f0c4136 sch_cake: fix a few style nits
8c95eca0bb8c sch_cake: don't call diffserv parsing code when it is not needed
9208d2863ac6 sch_cake: don't try to reallocate or unshare skb unconditionally

From netdev not yet accepted:
sch_cake: fix IP protocol handling in the presence of VLAN tags

The VLAN tag handling is actually wider than just cake so upstream are
working out how to fix it generically.  We fix it here just for cake.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 16:09:18 +01:00
Kevin Darbyshire-Bryant
77cd8f64ca kernel: cake: backport unused var patch to 5.4
This was backported to 4.19 and I clearly expected it to land in 5.4 but
it didn't (5.5) so backport it to 5.4 for consistency.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 09:34:24 +01:00
Kevin Darbyshire-Bryant
4ca4c94267 kernel: cake: skb hash backport to 419
Commit 7b4877c204 backported to 5.4 only,
backport to 4.19 as well.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 09:34:17 +01:00
Kevin Darbyshire-Bryant
3fda01a51e kernel: cake: renumber backport patches
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-30 09:34:06 +01:00
Florian Eckert
5596452cd4 target/hack-5.4: platform/x86/pcengines: revert led simswich compromise
With this change the LED subsystem is abused in the kernel to switch the
simswap. This change will be reverted, so we could use again the gpio
subsystem.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2020-06-26 20:54:53 +02:00
Petr Štetiar
e44e60b290 kernel: bump 5.4 to 5.4.48
Resolved merge conflict in the following patches:

 layerscape: 701-net-0213-dpaa2-eth-Add-CEETM-qdisc-support.patch
 ramips: 0013-owrt-hack-fix-mt7688-cache-issue.patch

Refreshed patches, removed upstreamed patch:

 bcm63xx: 020-v5.8-mtd-rawnand-brcmnand-fix-hamming-oob-layout.patch

Run tested: qemu-x86-64
Build tested: x86/64

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-22 12:51:22 +02:00
Christopher Hill
344e75eb2b ath79: patch upstream Mikrotik rb4xx-spi driver to be device tree aware
Backport upstream patches that make drivers/spi/spi-rb4xx.c device tree
aware, plus a null pointer fix.

Signed-off-by: Christopher Hill <ch6574@gmail.com>
2020-06-15 21:16:18 +02:00
Pawel Dembicki
e53ec043ba kirkwood: move usb support to modules
USB support built in kernel isn't required for booting.
This patch move USB support to modules.

CONFIG_USB_STORAGE is removed because it can be found in kmod-usb-storage
and all usb support for this targed is moved to kmods.

Tested-by: Cezary Jackiewicz <cezary@eko.one.pl> [nsa310]
Tested-by: Alberto Bursi <bobafetthotmail@gmail.com> [nsa325, ea4500]
Reviewed-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[keep CONFIG_SCSI]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-06-14 21:16:20 +02:00
Pawel Dembicki
73c3ba23a4 kirkwood: move sata features to modules
All devices are using nand images. Built-in SATA modules are not needed
anymore.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[only move CONFIG_SATA_MV]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Tested-by: Pawel Dembicki <paweldembicki@gmail.com> [pogo v4]
2020-06-14 21:16:20 +02:00
INAGAKI Hiroshi
8f3b176e86 kernel: rtl8367b: fix external interface modes
The interface mode number of RGMII_33V is 7 on RTL8367, but it's 9 on
RTL8367B.

the external interface modes for RTL8367 are follows:

- 0, Disabled
- 1, RGMII
- 2, MII_MAC
- 3, MII_PHY
- 4, TMII_MAC
- 5, TMII_PHY
- 6, GMII
- 7, RGMII_33V

the external interface modes for RTL8367B are follows:

- 0, Disabled
- 1, RGMII
- 2, MII_MAC
- 3, MII_PHY
- 4, TMII_MAC
- 5, TMII_PHY
- 6, GMII
- 7, RMII_MAC
- 8, RMII_PHY
- 9, RGMII_33V

But the driver in U-Boot of RT-N56U GPL tar blocks using RGMII_33V (9)
mode and it seems to be unsupported on RTL8367B, so drop it from
switch-case in rtl8367b_extif_set_mode.

ref (RTL8367):

- TL-WR2453ND v1

ref (RTL8367B):

- ASUS RT-N56U
- TP-Link Archer C2 v1

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2020-06-11 21:50:01 +08:00
Felix Fietkau
2c82862068 kernel: backport upstream DSA GRO support
Should improve performance

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-10 16:17:12 +02:00
Petr Štetiar
e5aa498acb kernel: bump 5.4 to 5.4.45
Fixes CVE-2020-10757 via upstream commit df4988aa1c96 ("mm: Fix mremap
not considering huge pmd devmap").

Resolved merge conflict in the following patches:

 bcm27xx: 950-0128-gpiolib-Don-t-prevent-IRQ-usage-of-output-GPIOs.patch

Refreshed patches, removed upstreamed patch:

 generic: 751-v5.8-net-dsa-mt7530-set-CPU-port-to-fallback-mode.patch
 generic: 754-v5.7-net-dsa-mt7530-fix-roaming-from-DSA-user-ports.patch

Run tested: qemu-x86-64
Build tested: x86/64, imx6, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-09 16:59:33 +02:00
Kevin Darbyshire-Bryant
7b4877c204 kernel: sch_cake: use skb hash improve wireguard compatibility
While the other fq-based qdiscs take advantage of skb->hash and doesn't
recompute it if it is already set, sch_cake does not.

This was a deliberate choice because sch_cake hashes various parts of the
packet header to support its advanced flow isolation modes. However,
foregoing the use of skb->hash entirely loses a few important benefits:

- When skb->hash is set by hardware, a few CPU cycles can be saved by not
  hashing again in software.

- Tunnel encapsulations will generally preserve the value of skb->hash from
  before the encapsulation, which allows flow-based qdiscs to distinguish
  between flows even though the outer packet header no longer has flow
  information.

It turns out that we can preserve these desirable properties in many cases,
while still supporting the advanced flow isolation properties of sch_cake.
This patch does so by reusing the skb->hash value as the flow_hash part of
the hashing procedure in cake_hash() only in the following conditions:

- If the skb->hash is marked as covering the flow headers (skb->l4_hash is
  set)

AND

- NAT header rewriting is either disabled, or did not change any values
  used for hashing. The latter is important to match local-origin packets
  such as those of a tunnel endpoint.

The immediate motivation for fixing this was the recent patch to WireGuard
to preserve the skb->hash on encapsulation. As such, this is also what I
tested against; with this patch, added latency under load for competing
flows drops from ~8 ms to sub-1ms on an RRUL test over a WireGuard tunnel
going through a virtual link shaped to 1Gbps using sch_cake. This matches
the results we saw with a similar setup using sch_fq_codel when testing the
WireGuard patch.

Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
2020-06-05 21:03:26 +01:00
Rafał Miłecki
8c31afb978 kernel: b53: fix compilation with kernels 5.5+
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2020-06-05 12:42:45 +02:00
DENG Qingfang
5b9ba4a93e generic: mt7530: support adjusting EEE
Add support for adjusting EEE with ethtool

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-04 22:21:42 +02:00
DENG Qingfang
7c47f6601d generic: mt7530: fix roaming from DSA user ports
When a client moves from a DSA user port to a software port in a bridge,
it cannot reach any other clients that connected to the DSA user ports.
That is because SA learning on the CPU port is disabled, so the switch
ignores the client's frames from the CPU port and still thinks it is at
the user port.

Fix it by enabling SA learning on the CPU port.

To prevent the switch from learning from flooding frames from the CPU
port, set skb->offload_fwd_mark to 1 for unicast and broadcast frames,
and let the switch flood them instead of trapping to the CPU port.
Multicast frames still need to be trapped to the CPU port for snooping,
so set the SA_DIS bit of the MTK tag to 1 when transmitting those frames
to disable SA learning.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-04 22:21:42 +02:00
DENG Qingfang
dc4ffaa5ab generic: fix DSA VLAN filtering
Currently enabling VLAN filtering blocks all traffic in the bridge
immediately. That is because DSA ignores all VLAN setup when VLAN
filtering is disabled, and when it is enabled, there is no VLAN entry
in the VLAN table, causing all traffic to be blocked.

Add patches to allow VLAN setup even if VLAN filtering is disabled.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-04 22:21:42 +02:00
DENG Qingfang
d56d05f01f generic: mt7530: set CPU port to fallback mode
Currently, setting a bridge's self PVID to other value and deleting
the default VID 1 renders untagged ports of that VLAN unable to talk to
the CPU port:

	bridge vlan add dev br0 vid 2 pvid untagged self
	bridge vlan del dev br0 vid 1 self
	bridge vlan add dev sw0p0 vid 2 pvid untagged
	bridge vlan del dev sw0p0 vid 1
	# br0 cannot send untagged frames out of sw0p0 anymore

That is because the CPU port is set to security mode and its PVID is
still 1, and untagged frames are dropped due to VLAN member violation.

Set the CPU port to fallback mode so untagged frames can pass through.

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-04 22:21:42 +02:00
Felix Fietkau
2dd26fda16 kernel: fix portability issue with perf on linux 5.4
Remove dependencies on core kernel headers in host tools used to build perf,
which break on any non-linux system

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-06-04 21:52:57 +02:00
DENG Qingfang
24410595e9 generic: backport mv88e6xxx port mirroring support
Backport port mirroring support for mv88e6xxx

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
2020-06-03 20:34:15 +02:00
Álvaro Fernández Rojas
6c7cbf1420 kernel: mtdsplit: bcm_wfi: always add img partitions
This is useful when booting OpenWrt from ramdisks in order to have both
images partitions defined.
Furthermore, instead of always using img2 for the inactive image, let's use
img1 or img2 accordingly.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-03 18:50:58 +02:00
Thomas Albers
e23859765c linux/generic: remove obsolete config option LEDS_TRIGGER_IDE_DISK
Kernel config option LEDS_TRIGGER_IDE_DISK was renamed in kernel 4.8 to
CONFIG_LEDS_TRIGGER_DISK in upstream commit eb25cb9956cc ("leds: convert
IDE trigger to common disk trigger").

Removing it as it should be added only on targets which has usage for
this trigger.

Signed-off-by: Thomas Albers <thomas.gameiro@googlemail.com>
[commit description facelift]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-03 16:49:28 +02:00
Álvaro Fernández Rojas
18d2eeab8e kernel: mtdsplit: support Broadcom WFI bootflags
When firmware is flashed, cferam.000 extension is renamed to the next number.
When booting, CFE scans the NAND and picks the partition with the highest
cferam extension and ignores the other one.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 18:23:40 +02:00
Álvaro Fernández Rojas
1fd3dabfaf kernel: mtdsplit: improve JFFS2 scan
Allow retrieving full file name and length by parameters.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 18:23:40 +02:00
Álvaro Fernández Rojas
eed8a927ee kernel: mtdsplit: bcm_wfi: refactor code
Create new parse_bcm_wfi function with common code from current parsers.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 18:23:40 +02:00
Petr Štetiar
392c64d8fd kernel: bump 5.4 to 5.4.43
Refreshed patches, removed upstreamed patch:

 bcm27xx: 950-0642-component-Silence-bind-error-on-EPROBE_DEFER.patch

Run tested: qemu-x86-64
Build tested: x86/64, imx6, sunxi/a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2020-06-02 17:46:51 +02:00
Álvaro Fernández Rojas
4b2fe12953 kernel: mtdsplit: bcm_wfi: remove brcm,wfi-sercomm compatibility
The only Sercomm WFI user has been migrated to a dedicated firmware parser.
Keep support for no cferam partition based on a boolean DT property.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 09:08:38 +02:00
Álvaro Fernández Rojas
fce7380e0e kernel: mtdsplit: bcm_wfi: support Sercomm bootflags
Sercomm uses 2 bootflag partitions and boots the firmware with the highest
bootflag. Support splitting the firmware partition while keeping support for
unsplitted layout.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 09:08:30 +02:00
Álvaro Fernández Rojas
cd81d105d5 kernel: mtdsplit: bcm_wfi: code refactoring
- Rename master to mtd.
- Pass mtd size as an argument.
- Rename of_match_table.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-06-02 08:50:15 +02:00
Thibaut VARÈNE
48b14b9cbe generic: routerboot sysfs: soft_config support for ath79 cpufreq
This commit introduces support for R/W access to the CPU frequency
setting of routerboot on ath79 hardware.

On unsupported hardware, the sysfs attribute will expose the raw tag
value (read-only) to help with reverse engineering its meaning.

Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-05-28 11:09:10 +02:00
Thibaut VARÈNE
89226b8666 generic: routerboot sysfs: move tag_show_u32()
This routine will be shared between hard and soft config drivers.

Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-05-28 11:09:10 +02:00
Thibaut VARÈNE
f36e710e2d generic: routerboot sysfs: add support for soft_config
This driver exposes the data encoded in the "soft_config" flash segment
of MikroTik RouterBOARDs devices. It presents the data in a sysfs folder
named "soft_config" through a set of human-and-machine-parseable
attributes. Changes can be discarded by writing 0 to the 'commit'
attribute, or they can be committed to flash storage by writing 1.

This driver does not reuse any of the existing code previously found in
the "rbcfg" utility and makes this utility obsolete by providing a clean
sysfs interface.

Like "rbcfg", this driver requires 4K_SECTORS support since the flash
partition in which these parameters are stored is typically 4KB in size.

Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-05-28 11:09:10 +02:00
Thibaut VARÈNE
dac18f66fb generic: routerboot sysfs: move tag_show_string()
This routine will be shared between hard and soft config drivers.
Also use scnprintf() instead of snprintf().

Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-05-28 11:09:10 +02:00
Thibaut VARÈNE
39ec3c5986 generic: platform/mikrotik: rb_hardconfig.c minor fixes
For the sake of strictly typed code, add a missing const qualifier.
Add a missing return value in error path.
Check the return value of mtd_read(), for good measure.
Also demote the error printks of failed sysfs file creation to warn
level since they are not fatal in the init() sequence.
Finally, add a note regarding PAGE_SIZE and clarify a comment.

Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-05-28 11:09:10 +02:00
Thibaut VARÈNE
429fbc96a4 generic: platform/mikrotik: reorder Kconfig
The depends and select should apply to the sysfs driver, not the meta
config.

Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
2020-05-28 11:09:10 +02:00
Álvaro Fernández Rojas
584d4bf1d3 bcm27xx: update patches from RPi foundation
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-28 10:36:27 +02:00
Adrian Schmutzler
4661b05390 kernel: properly insert local mtd partition parsers
Between 4.19 and 5.4, the kernel moved the partition parsers into
the parsers subdirectory. This led to some necessary rebasing of
our local patches for parsers, which partially has been performed
without caring about where the code was inserted.

This commit tries to adjust our local patches so that parsers are
inserted at the "proper" positions with respect to alphabetic sorting
(if possible). Thus, the commit is cosmetic.

While this might look useless now, it will make life easier when
adding other parsers in the future or for rebasing on kernel changes.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-25 21:11:47 +02:00
Adrian Schmutzler
b91b7d8963 kernel: remove a bunch of trailing whitespaces
These trailing whitespaces were reported during kernel patch refresh.

While at it, harmonize a few indents as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-05-25 21:11:47 +02:00