// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "ar9344.dtsi" #include #include / { model = "TP-Link TL-WR841HP v2"; compatible = "tplink,tl-wr841hp-v2", "qca,ar9344"; aliases { led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; led-upgrade = &led_system; label-mac-device = &wmac; }; keys { compatible = "gpio-keys"; reset { linux,code = ; gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; debounce-interval = <60>; }; }; leds { compatible = "gpio-leds"; wan { label = "green:wan"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; lan1 { label = "green:lan1"; gpios = <&gpio 12 GPIO_ACTIVE_LOW>; }; lan2 { label = "green:lan2"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; lan3 { label = "green:lan3"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; lan4 { label = "green:lan4"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; wps { label = "green:wps"; gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; wlan { label = "green:wlan"; gpios = <&gpio 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; led_system: system { label = "green:system"; gpios = <&gpio 22 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; }; &ref { clock-frequency = <40000000>; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; uboot: partition@0 { label = "u-boot"; reg = <0x000000 0x020000>; read-only; }; partition@20000 { compatible = "tplink,firmware"; label = "firmware"; reg = <0x020000 0x7d0000>; }; art: partition@7f0000 { label = "art"; reg = <0x7f0000 0x010000>; read-only; }; }; }; }; &gpio { gpio_ext_lna0 { gpio-hog; gpios = <18 GPIO_ACTIVE_HIGH>; output-high; line-name = "tp-link:ext:lna0"; }; gpio_ext_lna1 { gpio-hog; gpios = <19 GPIO_ACTIVE_HIGH>; output-high; line-name = "tp-link:ext:lna1"; }; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; nvmem-cells = <&macaddr_uboot_1fc00>; nvmem-cell-names = "mac-address"; }; ð0 { status = "okay"; phy-handle = <&swphy0>; nvmem-cells = <&macaddr_uboot_1fc00>; nvmem-cell-names = "mac-address"; mac-address-increment = <1>; }; ð1 { status = "okay"; nvmem-cells = <&macaddr_uboot_1fc00>; nvmem-cell-names = "mac-address"; gmac-config { device = <&gmac>; switch-phy-swap = <1>; }; }; &uboot { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_uboot_1fc00: macaddr@1fc00 { reg = <0x1fc00 0x6>; }; };