// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca953x.dtsi" #include #include #include / { model = "Letv LBA-047-CH"; compatible = "letv,lba-047-ch", "qca,qca9531"; aliases { led-boot = &led_status_red; led-failsafe = &led_status_red; led-running = &led_status_blue; led-upgrade = &led_status_red; label-mac-device = ð0; }; keys { compatible = "gpio-keys"; reset { label = "reset"; linux,code = ; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; }; }; leds { compatible = "gpio-leds"; pinctrl-names = "default"; pinctrl-0 = <&led_wan_pin>; led_status_blue: status_blue { label = "blue:status"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; led_status_red: status_red { label = "red:status"; gpios = <&gpio 11 GPIO_ACTIVE_LOW>; }; }; virtual_flash { compatible = "mtd-concat"; devices = <&fwconcat0 &fwconcat1>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { reg = <0x0 0x0>; label = "firmware"; compatible = "openwrt,uimage", "denx,uimage"; openwrt,ih-magic = ; }; }; }; }; &pinmux { /* GPIO 4: LED_LINK_5 (WAN) */ led_wan_pin: pinmux_led_wan_pin { pinctrl-single,bits = <0x04 0x0000002d 0x000000ff>; }; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <50000000>; m25p,fast-read; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x0 0x40000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x40000 0x10000>; read-only; }; fwconcat0: partition@50000 { label = "fwconcat0"; reg = <0x50000 0xe30000>; }; partition@e80000 { label = "loader"; reg = <0xe80000 0x10000>; }; fwconcat1: partition@e90000 { label = "fwconcat1"; reg = <0xe90000 0x160000>; }; art: partition@ff0000 { label = "art"; reg = <0xff0000 0x10000>; read-only; }; }; }; }; ð0 { status = "okay"; phy-handle = <&swphy4>; nvmem-cells = <&macaddr_art_0>; nvmem-cell-names = "mac-address"; }; ð1 { compatible = "qca,qca9530-eth", "syscon", "simple-mfd"; nvmem-cells = <&macaddr_art_6>; nvmem-cell-names = "mac-address"; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; }; &art { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_art_0: macaddr@0 { reg = <0x0 0x6>; }; macaddr_art_6: macaddr@6 { reg = <0x6 0x6>; }; };