// SPDX-License-Identifier: GPL-2.0-or-later OR MIT #include "qca955x.dtsi" #include #include / { compatible = "sophos,ap15", "qca,qca9558"; model = "Sophos AP15"; aliases { led-boot = &led_status_green; led-failsafe = &led_status_yellow; led-running = &led_status_green; led-upgrade = &led_status_yellow; label-mac-device = ð0; }; chosen { bootargs = "console=ttyS0,115200n8"; }; leds { compatible = "gpio-leds"; led_status_green: status_green { label = "green:status"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; default-state = "on"; }; led_status_yellow: status_yellow { label = "yellow:status"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; }; }; }; &pcie0 { status = "okay"; }; &spi { status = "okay"; flash@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <25000000>; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; partition@0 { label = "u-boot"; reg = <0x000000 0x040000>; read-only; }; partition@40000 { label = "u-boot-env"; reg = <0x040000 0x010000>; }; art: partition@50000 { label = "art"; reg = <0x050000 0x010000>; read-only; }; config: partition@60000 { label = "config"; reg = <0x060000 0x010000>; read-only; }; partition@70000 { compatible = "denx,uimage"; label = "firmware"; reg = <0x070000 0xf90000>; }; }; }; }; &mdio0 { status = "okay"; phy-mask = <0x10>; phy4: ethernet-phy@4 { reg = <4>; eee-broken-100tx; eee-broken-1000t; }; }; ð0 { status = "okay"; pll-data = <0xa6000000 0xa0000101 0xa0001313>; nvmem-cells = <&macaddr_config_201a>; nvmem-cell-names = "mac-address"; phy-mode = "rgmii-id"; phy-handle = <&phy4>; gmac_config: gmac-config { device = <&gmac>; rgmii-enabled = <1>; rxdv-delay = <3>; rxd-delay = <3>; txen-delay = <3>; txd-delay = <3>; }; }; &wmac { status = "okay"; mtd-cal-data = <&art 0x1000>; }; &config { compatible = "nvmem-cells"; #address-cells = <1>; #size-cells = <1>; macaddr_config_201a: macaddr@201a { reg = <0x201a 0x6>; }; };