d9e12c21fa
The Netgear GS3xx devices do not properly initialise the port LEDs during startup unless the boot command in U-Boot is changed. Making the U-Boot env partition writable allows this modification to be done from within OpenWrt by calling "fw_setenv bootcmd rtk network on\; boota". Signed-off-by: Andreas Böhler <dev@aboehler.at>
61 lines
1.0 KiB
Plaintext
61 lines
1.0 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "rtl8380_netgear_gigabit.dtsi"
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0000000 0x00e0000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@e0000 {
|
|
label = "u-boot-env";
|
|
reg = <0x00e0000 0x0010000>;
|
|
};
|
|
|
|
partition@f0000 {
|
|
label = "u-boot-env2";
|
|
reg = <0x00f0000 0x0010000>;
|
|
};
|
|
|
|
partition@100000 {
|
|
label = "jffs";
|
|
reg = <0x0100000 0x0100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
label = "jffs2";
|
|
reg = <0x0200000 0x0100000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@300000 {
|
|
label = "firmware";
|
|
compatible = "openwrt,uimage", "denx,uimage";
|
|
openwrt,ih-magic = <0x4e474335>;
|
|
reg = <0x0300000 0x0e80000>;
|
|
};
|
|
|
|
partition@1180000 {
|
|
label = "runtime2";
|
|
reg = <0x1180000 0x0e80000>;
|
|
read-only;
|
|
};
|
|
};
|
|
};
|
|
};
|