tn3399_openwrt/target/linux/at91/image/sama7.mk
Claudiu Beznea 3e53eec589 at91: add support for sama7g5-ek board
Add support for SAMA7G5-EK board.
Hardware:
- SoC: SAMA7G5
- RAM: Aliance Memory AS4C256M16D3LC (4 Gbit DDR3L)
- SD/MMC: 1 standard 4bit SD Card interface
- USB: 1 Micro-AB host/device, 1 Type-A host, 1 Type-C host
- CAN: 2 interfaces
- Ethernet: 10/100 port, 1Gbps port
- Wi-Fi/BT: 1 optional interface
- Audio: 1 SPDIF RX port, 1 SPDIF TX port, 4 digital microphones
- Camera: 1 RPi CSI camera interface
- Debug: 1 J-Link-OB + CDC, 1 JTAG
- LEDs: 1 RGB
- Buttons: 4 push buttons
- Expansions: 1 RPi Expansion connector, 2 mikroBUS connectors
- Power management: 1 power management IC, 1 power consumption
  measurement device

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
2022-02-24 19:05:29 +01:00

58 lines
1.4 KiB
Makefile

define Device/default-nand
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 2048
MKUBIFS_OPTS := -m $$(PAGESIZE) -e 124KiB -c 2048
endef
define Build/at91-sdcard
$(if $(findstring ext4,$@), \
rm -f $@.boot
mkfs.fat -C $@.boot $(FAT32_BLOCKS)
mcopy -i $@.boot \
$(KDIR)/$(DEVICE_NAME)-fit-zImage.itb \
::$(DEVICE_NAME)-fit.itb
mcopy -i $@.boot \
$(BIN_DIR)/u-boot-$(DEVICE_DTS:at91-%=%)_mmc1/u-boot.bin \
::u-boot.bin
mcopy -i $@.boot \
$(BIN_DIR)/at91bootstrap-$(DEVICE_DTS:at91-%=%)sd_uboot/at91bootstrap.bin \
::BOOT.bin
$(CP) uboot-env.txt $@-uboot-env.txt
sed -i '2d;3d' $@-uboot-env.txt
sed -i '2i board='"$(DEVICE_NAME)"'' $@-uboot-env.txt
sed -i '3i board_name='"$(firstword $(SUPPORTED_DEVICES))"'' $@-uboot-env.txt
mkenvimage -s 0x4000 -o $@-uboot.env $@-uboot-env.txt
mcopy -i $@.boot $@-uboot.env ::uboot.env
./gen_at91_sdcard_img.sh \
$@.img \
$@.boot \
$(KDIR)/root.ext4 \
$(AT91_SD_BOOT_PARTSIZE) \
$(CONFIG_TARGET_ROOTFS_PARTSIZE)
gzip -nc9 $@.img > $@
rm -f $@.img $@.boot $@-uboot.env $@-uboot-env.txt)
endef
define Device/microchip_sama7g5-ek
$(Device/evaluation-dtb)
DEVICE_VENDOR := Microchip
DEVICE_MODEL := SAMA7G5-EK
DEVICE_DTS := at91-sama7g5ek
SUPPORTED_DEVICES := microchip,sama7g5ek
KERNEL_SIZE := 6144k
KERNEL_LOADADDR := 0x62000000
$(Device/evaluation-sdimage)
endef
TARGET_DEVICES += microchip_sama7g5-ek