tn3399_openwrt

源码是从 https://gitee.com/de-eem/openwrt 搬过来的

Go to file

John Crispin 1af1682eb2 wrong md5sum in ltq-ifxos Signed-off-by: Luka Perkov SVN-Revision: 27575		2011-07-10 10:40:37 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
package	wrong md5sum in ltq-ifxos	2011-07-10 10:40:37 +00:00
scripts	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
target	ar71xx: do not reset the hardware on transmit timeout - this would mess up the up the PHY state	2011-07-09 06:30:13 +00:00
toolchain	the only reasons for having 4.4 around are avr32 and ubicom32, so make it depend on them	2011-07-08 11:15:00 +00:00
tools	firmware-utils: rename the devname variable in mkwrgimg to avoid a clash with a BSD stdlib function	2011-07-08 05:20:24 +00:00
.gitignore	add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
rules.mk	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org