d8e8a2a8db
It still requires fixing PCIe support: [ 6.644699] pcie_iproc_bcma bcma0:7: host bridge /axi@18000000/pcie@12000 ranges: [ 6.652217] pcie_iproc_bcma bcma0:7: No bus range found for /axi@18000000/pcie@12000, using [bus 00-ff] [ 6.661833] OF: /axi@18000000/pcie@12000: Missing device_type [ 6.667622] pcie_iproc_bcma: probe of bcma0:7 failed with error -12 [ 6.673985] pcie_iproc_bcma bcma0:8: host bridge /axi@18000000/pcie@13000 ranges: [ 6.681514] pcie_iproc_bcma bcma0:8: No bus range found for /axi@18000000/pcie@13000, using [bus 00-ff] [ 6.691137] pcie_iproc_bcma: probe of bcma0:8 failed with error -12 [ 6.697522] pcie_iproc_bcma bcma0:9: host bridge /axi@18000000/pcie@14000 ranges: [ 6.705048] pcie_iproc_bcma bcma0:9: No bus range found for /axi@18000000/pcie@14000, using [bus 00-ff] [ 6.714669] pcie_iproc_bcma: probe of bcma0:9 failed with error -12 Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
62 lines
1.5 KiB
Diff
62 lines
1.5 KiB
Diff
From c862059875cffc013ee27bf9759ac288224e7a14 Mon Sep 17 00:00:00 2001
|
|
From: Vivek Unune <npcomplete13@gmail.com>
|
|
Date: Wed, 4 Nov 2020 15:29:52 -0500
|
|
Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl
|
|
|
|
Now that we have a pin controller, use that instead of manuplating the
|
|
mdio/mdc pins directly. i.e. we no longer require the mdio-mii-mux
|
|
|
|
Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
|
|
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
---
|
|
.../boot/dts/bcm47094-linksys-panamera.dts | 26 +++----------------
|
|
1 file changed, 4 insertions(+), 22 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
|
|
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
|
|
@@ -123,33 +123,13 @@
|
|
};
|
|
};
|
|
|
|
- mdio-bus-mux {
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
+ mdio-bus-mux@18003000 {
|
|
|
|
/* BIT(9) = 1 => external mdio */
|
|
- mdio_ext: mdio@200 {
|
|
+ mdio@200 {
|
|
reg = <0x200>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
- };
|
|
- };
|
|
-
|
|
- mdio-mii-mux {
|
|
- compatible = "mdio-mux-mmioreg";
|
|
- mdio-parent-bus = <&mdio_ext>;
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- reg = <0x1800c1c0 0x4>;
|
|
-
|
|
- /* BIT(6) = mdc, BIT(7) = mdio */
|
|
- mux-mask = <0xc0>;
|
|
-
|
|
- mdio-mii@0 {
|
|
- /* Enable MII function */
|
|
- reg = <0x0>;
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
|
|
switch@0 {
|
|
compatible = "brcm,bcm53125";
|
|
@@ -159,6 +139,8 @@
|
|
reset-names = "robo_reset";
|
|
reg = <0>;
|
|
dsa,member = <1 0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&pinmux_mdio>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|