tn3399_openwrt

源码是从 https://gitee.com/de-eem/openwrt 搬过来的

Go to file

Jo-Philipp Wich 29123aee6d image.mk: pass through $(CONFIG_PKG_BUILD_JOBS) to the mksquashfs -processors option SVN-Revision: 28305		2011-09-26 02:02:35 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	image.mk: pass through $(CONFIG_PKG_BUILD_JOBS) to the mksquashfs -processors option	2011-09-26 02:02:35 +00:00
package	ath9k: fix some tx aggregation issues - reduces the number of tx dma stop failures	2011-09-25 18:34:54 +00:00
scripts	allow targets to define a default subtarget when using automatic subtarget detection from r27407	2011-07-04 11:21:37 +00:00
target	ar71xx: fix MAC addresses on the DIR-825-B1 board	2011-09-23 19:56:39 +00:00
toolchain	uclibc: backport upstream signalfd patch	2011-08-25 15:59:21 +00:00
tools	firmware-utils/mktplinkfw: add support for TL-WR703N v1	2011-09-21 11:47:55 +00:00
.gitignore	add vim temp files (*~) to .gitignore	2011-04-29 15:11:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	add menuconfig option to enable log files during build process	2011-07-03 17:37:31 +00:00
feeds.conf.default	switch to LuCI trunk, should be stable enough for common use now	2010-11-16 00:05:41 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point	2010-09-01 17:51:36 +00:00
README	remove bison requirement (see [10398] & [14900])	2010-03-05 09:48:32 +00:00
rules.mk	rules.mk: provide a LIBGCC_A variable	2011-09-05 19:29:22 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org