源码是从
https://gitee.com/de-eem/openwrt
搬过来的
29c3611294
from Erik Tews <erik@datenzone.de> This patch has two effects. First, the quickleave feature/behaviour is disabled for all groups that are used on more than one interface. The idea of quickleave is to leave a group fast and later figure out whether there is still somebody interested in that group. For groups used on more than one interface, it is already known that there is still somebody interested in that group. Second, when a leave is received for a group that is used on more than one interface, igmpproxy sends queries on all interface to discover remeining listeners for that group. Previously these queries were only send on the interface the leave was received on, so that listeners on the other interfaces were not discovered and the group might be left on the upstream router incorrectly. This patch can be improved by sending the queries only on the interface the leave was received on and adapting the algorithm in internAgeRoute(...) in rttable.c in a way that only one interface is actually processed and all other interfaces of the route are silently assumed to be still active. Signed-off-by: Erik Tews <erik@datenzone.de> SVN-Revision: 44859 |
||
|---|---|---|
| config | ||
| docs | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf.default | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org