INAGAKI Hiroshi 3198ec5b9d ipq806x: fix and cleanup dts for NEC WG2600HP ... This commit fixes and cleanups qcom-ipq8064-wg2600hp.dts to improve the support for WG2600HP. - Use dt label in qcom-ipq8064.dtsi: - gmac1 - gmac2 - gsbi4 - gsbi4_serial - gsbi5 - hs_phy_0 - ss_phy_0 - usb3_0 - usb3_1 - pcie0 - pcie1 - qcom_pinmux - Fix wrong pcie reset (perst) gpios - drop reset-gpio and use perst-gpios in qcom-ipq8064.dtsi - Remove unnecessary dt label from device dts - flash - phy0, phy4 - Rename spi-nor node to "flash" from "m25p80" - Fix qca,ar8327-initvals - use oem settings - fix: PAD0_MODE, PAD6_MODE - drop: PAD5_MODE (unnecessary) - Move mtd partitions under partitions (fixed-partitions) node - Specify "firmware" partition format - WG2600HP uses uImage format (denx,uimage) - Change failsafe status LED to power_red Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2018-12-12 18:59:01 +01:00
..
base-files	apm821xx, ath79, ipq40xx, ipq806x, lantiq, ramips: base-files: Use generic diag.sh	2018-12-06 08:42:40 +01:00
files-4.14/arch/arm/boot/dts	ipq806x: fix and cleanup dts for NEC WG2600HP	2018-12-12 18:59:01 +01:00
image	ipq806x: Add support for IPQ8064 AP161 board	2018-11-26 12:05:46 +01:00
patches-4.14	kernel: bump 4.14 to 4.14.86	2018-12-10 11:48:44 +01:00
profiles	mac80211: fix selecting of ath10k -ct firmware	2018-09-27 00:22:13 +02:00
config-4.14	kernel: bump 4.14 to 4.14.77	2018-10-19 10:01:57 +02:00
Makefile	treewide: use wpad-basic for not small flash targets	2018-10-16 15:07:41 +01:00