tn3399_openwrt/target/linux/ath79/dts/ar7161_meraki_mr16.dts
Adrian Schmutzler 41cc7edc15 ath79: move dts-v1 statement to ath79.dtsi
The "/dts-v1/;" identifier is supposed to be present once at the
top of a device tree file after the includes have been processed.

In ath79, we therefore requested to have in the DTS files so far,
and omit it in the DTSI files. However, essentially the syntax of
the parent ath79.dtsi file already determines the DTS version, so
putting it into the DTS files is just a useless repetition.

Consequently, this patch puts the dts-v1 statement into the parent
ath79.dtsi, which is (indirectly) included by all DTS files. All
other occurences are removed.
Since the dts-v1 statement needs to be before any other definitions,
this also moves the includes to make sure the ath79.dtsi or its
descendants are always included first.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-09-25 23:26:34 +02:00

175 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7100.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "meraki,mr16", "qca,ar7161";
model = "Meraki MR16";
aliases {
led-boot = &led_power_orange;
led-failsafe = &led_power_orange;
led-running = &led_power_green;
led-upgrade = &led_power_orange;
};
extosc: ref {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-output-names = "ref";
clock-frequency = <40000000>;
};
leds {
compatible = "gpio-leds";
wifi1 {
label = "mr16:green:wifi1";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "mr16:green:wifi2";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
wifi3 {
label = "mr16:green:wifi3";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
wifi4 {
label = "mr16:green:wifi4";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
};
wan {
label = "mr16:green:wan";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led_power_orange: power_orange {
label = "mr16:orange:power";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led_power_green: power_green {
label = "mr16:green:power";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 { /* 2.4 GHz */
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0>;
qca,no-eeprom;
mtd-mac-address = <&config 0x66>;
mtd-mac-address-increment = <1>;
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 { /* 5 GHz */
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0>;
qca,no-eeprom;
mtd-mac-address = <&config 0x66>;
mtd-mac-address-increment = <2>;
#gpio-cells = <2>;
gpio-controller;
};
};
&pll {
clocks = <&extosc>;
};
&uart {
status = "okay";
};
&mdio0 {
status = "okay";
phy-mask = <0x1>;
phy0: ethernet-phy@0 {
reg = <0>;
};
};
&eth0 {
status = "okay";
mtd-mac-address = <&config 0x66>;
pll-data = <0x00110000 0x00001099 0x00991099>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x40000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x40000 0x40000>;
read-only;
};
config: partition@80000 {
label = "config";
reg = <0x80000 0x20000>;
read-only;
};
partition@a0000 {
label = "firmware";
reg = <0xa0000 0xf40000>;
compatible = "denx,uimage";
};
partition@fe0000 {
label = "art";
reg = <0xfe0000 0x20000>;
read-only;
};
};
};
};