tn3399_openwrt/target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts
Adrian Schmutzler 50fdc0374b ath79: provide label MAC address
This patch adds the label MAC address for several devices in
ath79.

Some devices require setting the MAC address in 02_network:

For the following devices, the netif device can be linked in
device tree, but the MAC address cannot be read:
- alfa-network,ap121f
- avm,fritz300e
- ubnt-xm devices

For the following devices, label MAC address is tied to lan or
wan, so no node to link to exists in device tree:
- adtran,bsap1800-v2
- adtran,bsap1840
- dlink,dir-842-c1/-c2/-c3
- engenius,ecb1750
- iodata,etg3-r
- iodata,wn-ac1167dgr
- iodata,wn-ac1600dgr
- iodata,wn-ac1600dgr2
- iodata,wn-ag300dgr
- nec,wg800hp
- nec,wg1200cr
- trendnet,tew-823dru

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-19 23:43:27 +02:00

83 lines
1.4 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "ar7242_buffalo_wzr-bhr.dtsi"
/ {
compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
model = "Buffalo WZR-HP-G450H/WZR-450HP";
aliases {
label-mac-device = &eth0;
};
ath9k-leds {
compatible = "gpio-leds";
led_movie_engine {
label = "buffalo:blue:movie_engine";
gpios = <&ath9k 13 GPIO_ACTIVE_LOW>;
};
router {
label = "buffalo:green:router";
gpios = <&ath9k 14 GPIO_ACTIVE_LOW>;
};
wireless {
label = "buffalo:green:wireless";
gpios = <&ath9k 15 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
};
};
&keys {
movie_engine {
label = "movie_engine";
linux,code = <BTN_6>;
linux,input-type = <EV_SW>;
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
aoss {
label = "aoss";
linux,code = <KEY_WPS_BUTTON>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
router_off {
label = "router_off";
linux,code = <BTN_5>;
linux,input-type = <EV_SW>;
gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
debounce-interval = <60>;
};
};
&eth0 {
mtd-mac-address = <&art 0x1002>;
};
&sec_vpn {
label = "buffalo:orange:security";
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
mtd-mac-address = <&art 0x1002>;
qca,no-eeprom;
#gpio-cells = <2>;
gpio-controller;
};
};