tn3399_openwrt/target/linux/ath79/dts/qca9533_tplink_cpe210.dtsi
Adrian Schmutzler 50fdc0374b ath79: provide label MAC address
This patch adds the label MAC address for several devices in
ath79.

Some devices require setting the MAC address in 02_network:

For the following devices, the netif device can be linked in
device tree, but the MAC address cannot be read:
- alfa-network,ap121f
- avm,fritz300e
- ubnt-xm devices

For the following devices, label MAC address is tied to lan or
wan, so no node to link to exists in device tree:
- adtran,bsap1800-v2
- adtran,bsap1840
- dlink,dir-842-c1/-c2/-c3
- engenius,ecb1750
- iodata,etg3-r
- iodata,wn-ac1167dgr
- iodata,wn-ac1600dgr
- iodata,wn-ac1600dgr2
- iodata,wn-ag300dgr
- nec,wg800hp
- nec,wg1200cr
- trendnet,tew-823dru

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-09-19 23:43:27 +02:00

137 lines
2.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca953x.dtsi"
/ {
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &system;
led-failsafe = &system;
led-running = &system;
led-upgrade = &system;
label-mac-device = &eth0;
};
leds {
compatible = "gpio-leds";
lan {
label = "tp-link:green:lan";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
link1 {
label = "tp-link:green:link1";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
link2 {
label = "tp-link:green:link2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
link3 {
label = "tp-link:green:link3";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
system: link4 {
label = "tp-link:green:link4";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
reset_button {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
};
&uart {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
label = "partition-table";
reg = <0x020000 0x10000>;
read-only;
};
info: partition@30000 {
label = "info";
reg = <0x030000 0x10000>;
read-only;
};
partition@40000 {
label = "firmware";
reg = <0x040000 0x780000>;
compatible = "tplink,firmware";
};
config: partition@7c0000 {
label = "config";
reg = <0x7c0000 0x30000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&info 0x8>;
};
&eth1 {
compatible = "syscon", "simple-mfd";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&info 0x8>;
};