c4b499bc03
This requires U-Boot environment changes: setenv OpenWrt_kernel watchguard_firebox-m300-fit-uImage.itb setenv loadaddr 0x20000000 setenv wgBootSysA 'setenv bootargs root=/dev/mmcblk0p2 rw rootdelay=2 console=$consoledev,$baudrate fsl_dpaa_fman.fsl_fm_max_frm=1530; mmc dev 0; ext2load mmc 0:1 $loadaddr $OpenWrt_kernel; bootm $loadaddr' Trying to sysupgrade an image containing this change on an M300 already running OpenWrt will fail with the following error: Tue Jun 14 12:06:21 EEST 2022 upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n). Tue Jun 14 12:06:21 EEST 2022 upgrade: Kernel switched to FIT uImage. Update U-Boot environment. Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from bootdisk... Tue Jun 14 12:06:21 EEST 2022 upgrade: Extract boot sector from the image Tue Jun 14 12:06:21 EEST 2022 upgrade: Reading partition table from image... Image check failed. This is to prevent rendering your device unbootable. Make the U-Boot environment changes as instruced above, and then flash the image using sysupgrade -F. The config can be kept, there is no need to use -n. After the new image booted successfully, you can increase the compat_version: uci set system.@system[0].compat_version='1.1' uci commit Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
17 lines
672 B
Makefile
17 lines
672 B
Makefile
define Device/watchguard_firebox-m300
|
|
DEVICE_VENDOR := WatchGuard
|
|
DEVICE_MODEL := Firebox M300
|
|
DEVICE_COMPAT_MESSAGE := \
|
|
Kernel switched to FIT uImage. Update U-Boot environment.
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/fsl
|
|
DEVICE_PACKAGES := \
|
|
kmod-hwmon-w83793 kmod-ptp-qoriq kmod-rtc-rs5c372a kmod-tpm-i2c-atmel
|
|
KERNEL := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_SUFFIX := -fit-uImage.itb
|
|
IMAGES := sdcard.img.gz sysupgrade.img.gz
|
|
IMAGE/sysupgrade.img.gz := sdcard-img | gzip | append-metadata
|
|
IMAGE/sdcard.img.gz := sdcard-img | gzip
|
|
endef
|
|
TARGET_DEVICES += watchguard_firebox-m300
|