tn3399_openwrt/target/linux/ath79
Ryan Mounce 6d6985ff0e ath79: add support for WD My Net N750
SoC: AR9344
RAM: 128MB
Flash: 16MiB Winbond 25Q128BVFG SPI NOR
5GHz WiFi: AR9380 PCIe 3x3:3 802.11n
2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n

5x Gigabit ethernet via AR8327N switch (green + amber LEDs)
2x USB 2.0 via GL850G hub
4x front LEDs from SoC GPIO
1x front WPS button from SoC GPIO
1x bottom reset button from SoC GPIO

Known issues:
AR8327N LEDs only have default functionality, not presented in sysfs.
This is a regression from ar71xx.

UART header JP1, 115200 no parity 1 stop
TX
GND
VCC
(N/P)
RX

See https://openwrt.org/toh/wd/n750 for flashing detail.
Procedures unchanged from ar71xx.

Tested sysupgrade + factory flash from WD Emergency Recovery

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
2019-05-27 22:44:08 +02:00
..
base-files ath79: add support for WD My Net N750 2019-05-27 22:44:08 +02:00
dts ath79: add support for WD My Net N750 2019-05-27 22:44:08 +02:00
files ath79: ag71xx: Enable tx hang workaround for the rest of ar724x SoCs 2019-04-08 18:37:04 +02:00
generic ath79: add support for jjPlus JA76PF2 2019-03-18 20:43:09 +01:00
image ath79: add support for WD My Net N750 2019-05-27 22:44:08 +02:00
nand treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.118 2019-05-13 19:17:41 +02:00
patches-4.19 kernel: bump 4.19 to 4.19.44 2019-05-21 09:45:15 +02:00
tiny treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
config-4.14 ath79: add support for D-Link DIR-859 A1 2018-12-30 20:08:13 +01:00
config-4.19 ath79: add support for linux 4.19 2019-03-24 01:44:25 +01:00
Makefile build: add a config option for enabling a testing version of the target kernel 2019-05-11 11:37:10 +02:00
modules.mk