源码是从
https://gitee.com/de-eem/openwrt
搬过来的
6ebb46a40a
Fixing pvs1 bin voltage as found in GPL tarball and Qualcomm SDK. Also adjusting smb208_s2a/b minimum voltage to reflect lowest value in pvs table. Current ipq8065 devices in LEDE choose (based on eFuse data) pvs bin n4, that has correct values in DT, but in future a new device may choose n1 or n6. Without this change n1 is semi-correct and n6 is not available, because OPP driver disregards bins with voltage values that regulator cannot supply. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> |
||
|---|---|---|
| .github | ||
| config | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf.default | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
This is the buildsystem for the LEDE Linux distribution. Please use "make menuconfig" to choose your preferred configuration for the toolchain and firmware. You need to have installed gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers. Run "./scripts/feeds update -a" to get all the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install -a" to install symlinks of all of them into package/feeds/. Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your LEDE Community http://www.lede-project.org