86 lines
2.6 KiB
Diff
86 lines
2.6 KiB
Diff
From 98d2c4ca97dde30616fa78ad5677825b1966cec6 Mon Sep 17 00:00:00 2001
|
|
From: Claudiu Beznea <claudiu.beznea@microchip.com>
|
|
Date: Wed, 15 Sep 2021 10:48:35 +0300
|
|
Subject: [PATCH 232/247] ARM: dts: at91: sama7g5ek: use proper slew-rate
|
|
settings for GMACs
|
|
|
|
Datasheet chapter "EMAC Timings" specifies that while in 3.3V domain
|
|
GMAC's MDIO pins should be configured with slew-rate enabled, while the
|
|
data + signaling pins should be configured with slew-rate disabled when
|
|
GMAC works in RGMII or RMII modes. The pin controller for SAMA7G5 sets
|
|
the slew-rate as enabled for all pins. Adapt the device tree to comply
|
|
with these.
|
|
|
|
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
|
|
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
|
|
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
|
|
Link: https://lore.kernel.org/r/20210915074836.6574-2-claudiu.beznea@microchip.com
|
|
---
|
|
arch/arm/boot/dts/at91-sama7g5ek.dts | 28 ++++++++++++++++++++++------
|
|
1 file changed, 22 insertions(+), 6 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
|
|
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
|
|
@@ -355,7 +355,10 @@
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
- pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
|
|
+ pinctrl-0 = <&pinctrl_gmac0_default
|
|
+ &pinctrl_gmac0_mdio_default
|
|
+ &pinctrl_gmac0_txck_default
|
|
+ &pinctrl_gmac0_phy_irq>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
|
|
@@ -370,7 +373,9 @@
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-names = "default";
|
|
- pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
|
|
+ pinctrl-0 = <&pinctrl_gmac1_default
|
|
+ &pinctrl_gmac1_mdio_default
|
|
+ &pinctrl_gmac1_phy_irq>;
|
|
phy-mode = "rmii";
|
|
status = "okay";
|
|
|
|
@@ -425,14 +430,20 @@
|
|
<PIN_PA15__G0_TXEN>,
|
|
<PIN_PA30__G0_RXCK>,
|
|
<PIN_PA18__G0_RXDV>,
|
|
- <PIN_PA22__G0_MDC>,
|
|
- <PIN_PA23__G0_MDIO>,
|
|
<PIN_PA25__G0_125CK>;
|
|
+ slew-rate = <0>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_gmac0_mdio_default: gmac0_mdio_default {
|
|
+ pinmux = <PIN_PA22__G0_MDC>,
|
|
+ <PIN_PA23__G0_MDIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_gmac0_txck_default: gmac0_txck_default {
|
|
pinmux = <PIN_PA24__G0_TXCK>;
|
|
+ slew-rate = <0>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
@@ -449,8 +460,13 @@
|
|
<PIN_PD25__G1_RX0>,
|
|
<PIN_PD26__G1_RX1>,
|
|
<PIN_PD27__G1_RXER>,
|
|
- <PIN_PD24__G1_RXDV>,
|
|
- <PIN_PD28__G1_MDC>,
|
|
+ <PIN_PD24__G1_RXDV>;
|
|
+ slew-rate = <0>;
|
|
+ bias-disable;
|
|
+ };
|
|
+
|
|
+ pinctrl_gmac1_mdio_default: gmac1_mdio_default {
|
|
+ pinmux = <PIN_PD28__G1_MDC>,
|
|
<PIN_PD29__G1_MDIO>;
|
|
bias-disable;
|
|
};
|