183130227/tn3399_openwrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
86e18f6706
tn3399_openwrt/target/linux
History
Sven Eckelmann 86e18f6706 ipq806x: add support for OpenMesh A42 
* QCA IPQ401x
* 256 MB of RAM
* 32 MB of SPI NOR flash (s25fl256s1)
  - 2x 15 MB available; but one of the 15 MB regions is the recovery image
* 2T2R 2.4 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=OM-A42
* 2T2R 5 GHz
  - QCA4019 hw1.0 (SoC)
  - requires special BDF in QCA4019/hw1.0/board-2.bin with
    bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=OM-A42
* multi-color LED (controlled via red/green/blue GPIOs)
* 1x button (reset; kmod-input-gpio-keys compatible)
* external watchdog
  - triggered GPIO
* 1x USB (xHCI)
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 2x gigabit ethernet
* powered only via POE
  - 802.3af POE on Ethernet 1
  - 18-24v passive POE (mode B) on Ethernet 2

The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the factory image to the u-boot when the device boots up.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2018-01-13 08:00:14 +01:00
..
adm5120 treewide: populate boardname and model earlier 2017-07-15 23:13:34 +02:00
adm8668
apm821xx apm821xx: remove kernel 4.9 support 2018-01-12 08:00:05 +01:00
ar7 kernel: Update kernel 4.9 to 4.9.70 2017-12-19 22:45:27 +01:00
ar71xx kernel: bump 4.4 to 4.4.110 2018-01-10 00:11:39 +02:00
arc770 arc770: mark as source-only 2017-10-28 13:59:03 +02:00
archs38 treewide: drop target board_name functions 2017-07-15 23:13:34 +02:00
armvirt armvirt: Resync kernel configuration 2018-01-12 15:14:27 -08:00
at91 at91: create device specific sdcard images 2018-01-11 20:35:33 +01:00
ath25 kernel: cleanup CONFIG_SCHED_HRTICK 2017-06-29 04:46:59 +02:00
au1000 kernel: update kernel 3.18 to version 3.18.43 2016-10-24 20:25:14 +03:00
bcm53xx bcm53xx: rename SPI driver fix to use 0xx prefix as it was accepted 2018-01-12 23:29:48 +01:00
brcm47xx brcm47xx: image: build firmware for Asus WL-500g Deluxe 2017-12-29 23:18:19 +01:00
brcm63xx kernel: bump 4.4 to 4.4.107 2017-12-23 15:36:01 +01:00
brcm2708 kernel: move CONFIG_KASAN to generic config 2018-01-02 21:55:46 +02:00
cns3xxx kernel: bump 4.9 to 4.9.72 2017-12-26 23:31:00 +01:00
gemini kernel: Update kernel 4.4 to 4.4.100 2017-11-25 19:48:39 +01:00
generic kernel: Add a bunch of missing symbols 2018-01-12 15:14:27 -08:00
imx6 treewide: add only one device when appending to TARGET_DEVICES 2017-12-12 18:47:26 +01:00
ipq806x ipq806x: add support for OpenMesh A42 2018-01-13 08:00:14 +01:00
ixp4xx kernel: bump 4.4 to 4.4.107 2017-12-23 15:36:01 +01:00
kirkwood kirkwood: sort occurrences of boardame alphabetically 2018-01-09 22:06:55 +01:00
lantiq lantiq: create ATM/PTM interfaces with dsl as netdev name 2018-01-10 08:08:53 +01:00
layerscape kernel: bump 4.9 to 4.9.76 2018-01-11 20:32:36 +01:00
malta malta: bump tp v4.14 2018-01-09 10:26:16 +01:00
mcs814x merge: targets: update image generation and targets 2017-12-08 19:41:18 +01:00
mediatek kernel: bump 4.9 to 4.9.72 2017-12-26 23:31:00 +01:00
mpc85xx mpc85xx: use image metadata 2017-10-25 09:22:13 +02:00
mvebu kernel: bump 4.9 to 4.9.76 2018-01-11 20:32:36 +01:00
mxs treewide: drop target board_name functions 2017-07-15 23:13:34 +02:00
octeon kernel: bump 4.14 to 4.14.13 2018-01-11 20:34:33 +01:00
omap omap: clean up configuration 2017-10-18 21:46:05 +02:00
omap24xx merge: ssid: update default ssid 2017-12-08 19:41:18 +01:00
orion orion: Switch to 4.9 kernel 2017-10-24 18:39:17 -07:00
oxnas kernel: bump 4.4 to 4.4.110 2018-01-10 00:11:39 +02:00
pistachio kernel: bump 4.9 to 4.9.67 2017-12-07 01:41:09 +02:00
ppc40x treewide: drop target board_name functions 2017-07-15 23:13:34 +02:00
ppc44x ppc44x: mark as broken 2017-01-10 12:49:34 +01:00
ramips ramips: fix cpuclock for the GB-PC1 2018-01-12 08:02:51 +01:00
rb532 treewide: drop obsolete kernel config options 2017-10-04 20:08:15 +02:00
sunxi sunxi: enable missing config symbol 2018-01-11 03:14:07 +01:00
uml merge: targets: update image generation and targets 2017-12-08 19:41:18 +01:00
x86 kernel: bump 4.9 to 4.9.75 2018-01-10 00:11:39 +02:00
xburst xburst: enable high-res timers, refresh kernel config 2017-06-07 18:31:10 +02:00
zynq treewide: use only board_name function to get name 2017-07-15 23:13:34 +02:00
Makefile