Django Armstrong 1c2f7b5115 ath79: add support for Devolo WiFi Pro 1750e ... Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) 1x Atheros AR8033 WiFi2: QCA9558 3T3R (SiGE SE2565T 2.4 GHz power amp x3) WiFi5: QCA9880 3T3R (Skyworks 5003L1 5 GHz power amp x3) BTN: 1x Reset 1x WPS 1x USB eject LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is pin closest to rear ports) Dupont 4 pin header Rear RJ45 serial port non-functional USB: 1x v2.0 Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password previously set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: Django Armstrong <iamdjango@hotmail.com>		2019-01-26 21:46:33 +01:00
..
imagebuilder	imagebuilder: manifest function show stderr	2018-08-06 06:54:42 +02:00
linux	ath79: add support for Devolo WiFi Pro 1750e	2019-01-26 21:46:33 +01:00
sdk	sdk: find kernel modules when KDIR is a symlink	2018-11-29 09:36:14 +01:00
toolchain	merge: etc: update remaining files	2017-12-08 19:41:18 +01:00
Config.in	build: add support for enabling the rootfs/boot partition size option via target feature	2018-09-03 12:06:24 +02:00
Makefile