tn3399_openwrt/package/firmware
Pawel Dembicki c30220d458 ipq40xx: add support for Cell C RTL30VW
Cell C RTL30VW is a LTE router with tho gigabit ethernets and integrated
QMI mPCIE modem.

This is stripped version of ASKEY RTL0030VW.

Hardware:

Specification:
-CPU: IPQ4019
-RAM: 256MB
-Flash: NAND 128MB + NOR 16MB
-WiFi: Integrated bgn/ac
-LTE: mPCIe card (Modem chipset MDM9230)
-LAN: 2 Gigabit Ports
-USB: 2x USB2.0
-Serial console: RJ-45 115200 8n1
-Unsupported VoIP

Known issues:

None so far.

Instruction install:

There are two methods: Factory web-gui and serial + tftp.

Web-gui:
1. Apply factory image via stock web-gui.

Serial + initramfs:
1. Rename OpenWrt initramfs image to "image"
2. Connect serial console (115200,8n1)
3. Set IP to different than 192.168.1.11, but 24 bit mask, eg. 192.168.1.4.

4. U-Boot commands:
sf probe && sf read 0x80000000 0x180000 0x10000
setenv serverip 192.168.1.4
set fdt_high 0x85000000
tftpboot 0x84000000 image
bootm 0x84000000

5. Install sysupgrade image via "sysupgrade -n"

Back to stock:

All is needed is swap 0x4c byte in mtd8 from 0 to 1 or 1 to 0,
do firstboot and factory reset with OFW:

1. read mtd8:
dd if=/dev/mtd8 of=/tmp/mtd8
2. go to tmp:
cd /tmp/
3. write first part of partition:
dd if=mtd8 of=mtd8.new bs=1 count=76
4. check which layout uses bootloader:
cat /proc/mtd
5a. If first are kernel_1 and rootfs_1 write 0:
echo -n -e '\x00' >> mtd8.new
5b. If first are kernel and rootfs write 1:
echo -n -e '\x01' >> mtd8.new
6. fill with rest of data:
dd if=mtd8 bs=1 skip=77 >> mtd8.new
7. CHECK IF mtd8.new HAVE CHANGED ONLY ONE BYTE! e.g with:
hexdump mtd8.new
8. write new mtd8 to flash:
mtd write mtd8.new /dev/mtd8
9. do firstboot
10.reboot
11. Do back to factory defaults in OFW GUI.

Based on work: Cezary Jackiewicz <cezary@eko.one.pl>

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2020-04-10 15:22:26 +02:00
..
amd64-microcode Revert "amd64-microcode: create early load microcode image" 2018-11-27 18:58:33 +01:00
ath10k-firmware ath10k-firmware: update ath10k-ct firmware images 2020-03-27 10:18:41 +01:00
b43legacy-firmware treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
cypress-firmware cypress-firmware: update to v4.14.77-2020_0115 2020-02-01 10:59:51 +01:00
cypress-nvram brcm2708: rename target to bcm27xx 2020-02-14 14:10:51 +01:00
intel-microcode firmware: intel-microcode: bump to 20190918 2019-11-10 23:39:29 +01:00
ipq-wifi ipq40xx: add support for Cell C RTL30VW 2020-04-10 15:22:26 +02:00
lantiq/dsl-vrx200-firmware-xdsl treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
layerscape layerscape: resurrect support for FRDM-LS1012A 2020-03-12 12:59:44 +01:00
linux-firmware linux-firmware: add firmware for RTL8723BS SDIO modules 2020-03-28 13:03:02 +01:00
prism54-firmware treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
vsc73x5-ucode treewide: clean up download hashes 2016-12-16 22:39:22 +01:00
wireless-regdb wireless-regdb: Make it build with python2 2019-11-21 23:47:35 +01:00