tn3399_openwrt/target
Thomas Aldrian f755d81999 ramips: add support for Wavlink WL-WN578A2
This commit adds support for the Wavlink WL-WN578A2 dual-band wall-plug
wireless router. This device is also sold under the name SilverCrest
SWV 733 A2.

Device Specifications:

- CPU: MediaTek MT7628AN (580MHz)
- Flash: 8MB
- RAM: 64MB
- Bootloader: U-Boot
- Ethernet: 2x 10/100 Mbps
- 2.4 GHz: 802.11b/g/n SoC
- 5 GHz: 802.11a/n/ac MT7610E
- Antennas: internal
- 4 green LEDs: WPS/Power, LAN, WAN, wifi-low, wifi-med, wifi-high
- Buttons: Reset, WPS
- Sliding mode switch: AP, repeater, client
- Small sliding power switch

Flashing instructions:

U-Boot launches TFTP client if WPS button is pressed during power-on.
Configure as follows:

- Server IP: 192.168.10.100
- Filename (rename sysupgrade file to this): firmware.bin

Flashing should not take more than a minute, device will reboot
automatically.

Signed-off-by: Thomas Aldrian <dev.aldrian@gmail.com>
2021-05-28 01:12:21 +02:00
..
imagebuilder imagebuilder: unset BINARY_FOLDER and DOWNLOAD_FOLDER in final archive 2021-05-08 12:14:00 +02:00
linux ramips: add support for Wavlink WL-WN578A2 2021-05-28 01:12:21 +02:00
sdk sdk: unset BINARY_FOLDER and DOWNLOAD_FOLDER in final archives 2021-05-08 12:14:04 +02:00
toolchain target: fix copying of licenses for SDK/toolchain 2021-02-14 21:56:29 +01:00
Config.in include/image*: add support for device-tree overlays 2021-03-17 17:45:34 +00:00
Makefile