faa79f97b6
In preparation for a cleanup of 5.15 patches copy the files dir to 5.10 and 5.15 kernel version. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
426 lines
7.7 KiB
Plaintext
426 lines
7.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "qcom-ipq8065.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
model = "Arris TR4400 v2";
|
|
compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064";
|
|
|
|
memory@0 {
|
|
reg = <0x42000000 0x1e000000>;
|
|
device_type = "memory";
|
|
};
|
|
|
|
aliases {
|
|
led-boot = &led_status_blue;
|
|
led-failsafe = &led_status_red;
|
|
led-running = &led_status_blue;
|
|
led-upgrade = &led_status_red;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "rootfstype=squashfs noinitrd";
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&button_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&led_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
led_status_red: status_red {
|
|
label = "red:status";
|
|
gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_status_blue: status_blue {
|
|
label = "blue:status";
|
|
gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qcom_pinmux {
|
|
button_pins: button_pins {
|
|
mux {
|
|
pins = "gpio6", "gpio54";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
led_pins: led_pins {
|
|
mux {
|
|
pins = "gpio7", "gpio8";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
rgmii2_pins: rgmii2_pins {
|
|
tx {
|
|
pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32";
|
|
input-disable;
|
|
};
|
|
};
|
|
|
|
spi_pins: spi_pins {
|
|
cs {
|
|
pins = "gpio20";
|
|
drive-strength = <12>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&gsbi5 {
|
|
qcom,mode = <GSBI_PROT_SPI>;
|
|
status = "okay";
|
|
|
|
spi@1a280000 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&spi_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
|
|
|
|
flash@0 {
|
|
compatible = "everspin,mr25h256";
|
|
spi-max-frequency = <40000000>;
|
|
reg = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&nand_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
compatible = "qcom,nandcs";
|
|
|
|
nand-ecc-strength = <4>;
|
|
nand-bus-width = <8>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "0:SBL1";
|
|
reg = <0x0000000 0x0040000>;
|
|
read-only;
|
|
};
|
|
partition@40000 {
|
|
label = "0:MIBIB";
|
|
reg = <0x0040000 0x0140000>;
|
|
read-only;
|
|
};
|
|
partition@180000 {
|
|
label = "0:SBL2";
|
|
reg = <0x0180000 0x0140000>;
|
|
read-only;
|
|
};
|
|
partition@2c0000 {
|
|
label = "0:SBL3";
|
|
reg = <0x02c0000 0x0280000>;
|
|
read-only;
|
|
};
|
|
partition@540000 {
|
|
label = "0:DDRCONFIG";
|
|
reg = <0x0540000 0x0120000>;
|
|
read-only;
|
|
};
|
|
partition@660000 {
|
|
label = "0:SSD";
|
|
reg = <0x0660000 0x0120000>;
|
|
read-only;
|
|
};
|
|
partition@780000 {
|
|
label = "0:TZ";
|
|
reg = <0x0780000 0x0280000>;
|
|
read-only;
|
|
};
|
|
partition@a00000 {
|
|
label = "0:RPM";
|
|
reg = <0x0a00000 0x0280000>;
|
|
read-only;
|
|
};
|
|
partition@c80000 {
|
|
label = "0:APPSBL";
|
|
reg = <0x0c80000 0x0500000>;
|
|
read-only;
|
|
};
|
|
partition@1180000 {
|
|
label = "0:APPSBLENV";
|
|
reg = <0x1180000 0x0080000>;
|
|
};
|
|
partition@1200000 {
|
|
label = "0:ART";
|
|
reg = <0x1200000 0x0140000>;
|
|
read-only;
|
|
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
precal_ART_1000: precal@1000 {
|
|
reg = <0x1000 0x2f20>;
|
|
};
|
|
precal_ART_5000: precal@5000 {
|
|
reg = <0x5000 0x2f20>;
|
|
};
|
|
};
|
|
stock_partition@1340000 {
|
|
label = "stock_rootfs";
|
|
reg = <0x1340000 0x4000000>;
|
|
};
|
|
partition@5340000 {
|
|
label = "0:BOOTCONFIG";
|
|
reg = <0x5340000 0x0060000>;
|
|
read-only;
|
|
};
|
|
partition@53a0000 {
|
|
label = "0:SBL2_1";
|
|
reg = <0x53a0000 0x0140000>;
|
|
read-only;
|
|
};
|
|
partition@54e0000 {
|
|
label = "0:SBL3_1";
|
|
reg = <0x54e0000 0x0280000>;
|
|
read-only;
|
|
};
|
|
partition@5760000 {
|
|
label = "0:DDRCONFIG_1";
|
|
reg = <0x5760000 0x0120000>;
|
|
read-only;
|
|
};
|
|
partition@5880000 {
|
|
label = "0:SSD_1";
|
|
reg = <0x5880000 0x0120000>;
|
|
read-only;
|
|
};
|
|
partition@59a0000 {
|
|
label = "0:TZ_1";
|
|
reg = <0x59a0000 0x0280000>;
|
|
read-only;
|
|
};
|
|
partition@5c20000 {
|
|
label = "0:RPM_1";
|
|
reg = <0x5c20000 0x0280000>;
|
|
read-only;
|
|
};
|
|
partition@5ea0000 {
|
|
label = "0:BOOTCONFIG1";
|
|
reg = <0x5ea0000 0x0060000>;
|
|
read-only;
|
|
};
|
|
partition@5f00000 {
|
|
label = "0:APPSBL_1";
|
|
reg = <0x5f00000 0x0500000>;
|
|
read-only;
|
|
};
|
|
stock_partition@6400000 {
|
|
label = "stock_rootfs_1";
|
|
reg = <0x6400000 0x4000000>;
|
|
};
|
|
stock_partition@a400000 {
|
|
label = "stock_fw_env";
|
|
reg = <0xa400000 0x0100000>;
|
|
};
|
|
stock_partition@a500000 {
|
|
label = "stock_config";
|
|
reg = <0xa500000 0x0800000>;
|
|
};
|
|
stock_partition@ad00000 {
|
|
label = "stock_PKI";
|
|
reg = <0xad00000 0x0200000>;
|
|
};
|
|
stock_partition@af00000 {
|
|
label = "stock_scfgmgr";
|
|
reg = <0xaf00000 0x0100000>;
|
|
};
|
|
|
|
partition@6400000 {
|
|
label = "fw_env";
|
|
reg = <0x6400000 0x0100000>;
|
|
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_fw_env_0: macaddr@0 {
|
|
reg = <0x00 0x6>;
|
|
};
|
|
macaddr_fw_env_6: macaddr@6 {
|
|
reg = <0x06 0x6>;
|
|
};
|
|
macaddr_fw_env_c: macaddr@c {
|
|
reg = <0x0c 0x6>;
|
|
};
|
|
macaddr_fw_env_12: macaddr@12 {
|
|
reg = <0x12 0x6>;
|
|
};
|
|
macaddr_fw_env_18: macaddr@18 {
|
|
reg = <0x18 0x6>;
|
|
};
|
|
};
|
|
partition@6500000 {
|
|
label = "ubi";
|
|
reg = <0x6500000 0x9b00000>;
|
|
};
|
|
partition@1340000 {
|
|
label = "extra";
|
|
reg = <0x1340000 0x4000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&mdio0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
ethernet-phy@0 {
|
|
reg = <0x0>;
|
|
qca,ar8327-initvals = <
|
|
0x00004 0x7600000 /* PAD0_MODE */
|
|
0x00008 0x1000000 /* PAD5_MODE */
|
|
0x0000c 0x80 /* PAD6_MODE */
|
|
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
|
0x000e0 0xc74164de /* SGMII_CTRL */
|
|
0x0007c 0x4e /* PORT0_STATUS */
|
|
0x00094 0x4e /* PORT6_STATUS */
|
|
>;
|
|
};
|
|
|
|
phy7: ethernet-phy@7 {
|
|
reg = <7>;
|
|
};
|
|
};
|
|
|
|
&gmac0 {
|
|
status = "okay";
|
|
phy-mode = "rgmii";
|
|
qcom,id = <0>;
|
|
|
|
nvmem-cells = <&macaddr_fw_env_18>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
pinctrl-0 = <&rgmii2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&gmac1 {
|
|
status = "okay";
|
|
phy-mode = "sgmii";
|
|
qcom,id = <1>;
|
|
|
|
nvmem-cells = <&macaddr_fw_env_0>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&gmac3 {
|
|
status = "okay";
|
|
phy-mode = "sgmii";
|
|
qcom,id = <3>;
|
|
phy-handle = <&phy7>;
|
|
|
|
nvmem-cells = <&macaddr_fw_env_6>;
|
|
nvmem-cell-names = "mac-address";
|
|
};
|
|
|
|
&adm_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&pcie0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
bridge@0,0 {
|
|
reg = <0x00000000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi0: wifi@1,0 {
|
|
compatible = "pci168c,0046";
|
|
reg = <0x00010000 0 0 0 0>;
|
|
|
|
nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>;
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "okay";
|
|
reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-0 = <&pcie1_pins>;
|
|
pinctrl-names = "default";
|
|
max-link-speed = <1>;
|
|
|
|
bridge@0,0 {
|
|
reg = <0x00000000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi1: wifi@1,0 {
|
|
compatible = "pci168c,0040";
|
|
reg = <0x00010000 0 0 0 0>;
|
|
|
|
nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>;
|
|
nvmem-cell-names = "pre-calibration", "mac-address";
|
|
};
|
|
};
|
|
};
|