ecf1abe5bf
Usb node now are disabled by default in dtsi. Enable again them in each device dts. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
467 lines
7.8 KiB
Plaintext
467 lines
7.8 KiB
Plaintext
#include "qcom-ipq8065-smb208.dtsi"
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
memory@0 {
|
|
reg = <0x42000000 0x1e000000>;
|
|
device_type = "memory";
|
|
};
|
|
|
|
reserved-memory {
|
|
rsvd@5fe00000 {
|
|
reg = <0x5fe00000 0x200000>;
|
|
reusable;
|
|
};
|
|
|
|
ramoops@42100000 {
|
|
compatible = "ramoops";
|
|
reg = <0x42100000 0x40000>;
|
|
record-size = <0x4000>;
|
|
console-size = <0x4000>;
|
|
ftrace-size = <0x4000>;
|
|
pmsg-size = <0x4000>;
|
|
};
|
|
};
|
|
|
|
aliases {
|
|
label-mac-device = &gmac2;
|
|
|
|
led-boot = &power_white;
|
|
led-failsafe = &power_amber;
|
|
led-running = &power_white;
|
|
led-upgrade = &power_amber;
|
|
|
|
mdio-gpio0 = &mdio0;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&button_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
wifi {
|
|
label = "wifi";
|
|
gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RFKILL>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
debounce-interval = <60>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
leds: leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-0 = <&led_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
power_white: power_white {
|
|
label = "white:power";
|
|
gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
|
default-state = "keep";
|
|
};
|
|
|
|
power_amber: power_amber {
|
|
label = "amber:power";
|
|
gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wan_white {
|
|
label = "white:wan";
|
|
gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wan_amber {
|
|
label = "amber:wan";
|
|
gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wifi {
|
|
label = "white:wifi";
|
|
gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
wps {
|
|
label = "white:wps";
|
|
gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&qcom_pinmux {
|
|
button_pins: button_pins {
|
|
mux {
|
|
pins = "gpio6", "gpio54", "gpio65";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
led_pins: led_pins {
|
|
mux {
|
|
pins = "gpio7", "gpio8", "gpio9",
|
|
"gpio22", "gpio23", "gpio24",
|
|
"gpio26", "gpio53", "gpio64";
|
|
function = "gpio";
|
|
drive-strength = <2>;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
mdio0_pins: mdio0-pins {
|
|
clk {
|
|
pins = "gpio1";
|
|
input-disable;
|
|
};
|
|
};
|
|
|
|
rgmii2_pins: rgmii2-pins {
|
|
tx {
|
|
pins = "gpio27", "gpio28", "gpio29",
|
|
"gpio30", "gpio31", "gpio32";
|
|
input-disable;
|
|
};
|
|
};
|
|
|
|
spi_pins: spi_pins {
|
|
mux {
|
|
pins = "gpio18", "gpio19", "gpio21";
|
|
function = "gsbi5";
|
|
bias-pull-down;
|
|
};
|
|
|
|
data {
|
|
pins = "gpio18", "gpio19";
|
|
drive-strength = <10>;
|
|
};
|
|
|
|
cs {
|
|
pins = "gpio20";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
clk {
|
|
pins = "gpio21";
|
|
drive-strength = <12>;
|
|
};
|
|
};
|
|
|
|
spi6_pins: spi6_pins {
|
|
mux {
|
|
pins = "gpio55", "gpio56", "gpio58";
|
|
function = "gsbi6";
|
|
bias-pull-down;
|
|
};
|
|
|
|
mosi {
|
|
pins = "gpio55";
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
miso {
|
|
pins = "gpio56";
|
|
drive-strength = <14>;
|
|
};
|
|
|
|
cs {
|
|
pins = "gpio57";
|
|
drive-strength = <12>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
clk {
|
|
pins = "gpio58";
|
|
drive-strength = <12>;
|
|
};
|
|
|
|
reset {
|
|
pins = "gpio33";
|
|
drive-strength = <10>;
|
|
bias-pull-down;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
usb0_pwr_en_pins: usb0_pwr_en_pins {
|
|
mux {
|
|
pins = "gpio15";
|
|
function = "gpio";
|
|
drive-strength = <12>;
|
|
bias-pull-down;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
usb1_pwr_en_pins: usb1_pwr_en_pins {
|
|
mux {
|
|
pins = "gpio16", "gpio68";
|
|
function = "gpio";
|
|
drive-strength = <12>;
|
|
bias-pull-down;
|
|
output-high;
|
|
};
|
|
};
|
|
};
|
|
|
|
&nand {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
compatible = "qcom,nandcs";
|
|
|
|
nand-ecc-strength = <4>;
|
|
nand-bus-width = <8>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
nand-is-boot-medium;
|
|
qcom,boot-partitions = <0x0 0x1180000>;
|
|
|
|
partitions: partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "qcadata";
|
|
reg = <0x0000000 0x0c80000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@c80000 {
|
|
label = "APPSBL";
|
|
reg = <0x0c80000 0x0500000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1180000 {
|
|
label = "APPSBLENV";
|
|
reg = <0x1180000 0x0080000>;
|
|
read-only;
|
|
};
|
|
|
|
art: partition@1200000 {
|
|
label = "art";
|
|
reg = <0x1200000 0x0140000>;
|
|
read-only;
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_art_0: macaddr@0 {
|
|
reg = <0x0 0x6>;
|
|
};
|
|
|
|
macaddr_art_6: macaddr@6 {
|
|
reg = <0x6 0x6>;
|
|
};
|
|
|
|
precal_art_1000: precal@1000 {
|
|
reg = <0x1000 0x2f20>;
|
|
};
|
|
|
|
precal_art_5000: precal@5000 {
|
|
reg = <0x5000 0x2f20>;
|
|
};
|
|
};
|
|
|
|
partition@1340000 {
|
|
label = "artbak";
|
|
reg = <0x1340000 0x0140000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1480000 {
|
|
label = "kernel";
|
|
reg = <0x1480000 0x0400000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&mdio0_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
qca,ar8327-initvals = <
|
|
0x00004 0x7600000 /* PAD0_MODE */
|
|
0x00008 0x1000000 /* PAD5_MODE */
|
|
0x0000c 0x80 /* PAD6_MODE */
|
|
0x000e4 0xaa545 /* MAC_POWER_SEL */
|
|
0x000e0 0xc74164de /* SGMII_CTRL */
|
|
0x0007c 0x4e /* PORT0_STATUS */
|
|
0x00094 0x4e /* PORT6_STATUS */
|
|
0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
|
|
0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
|
|
0x00978 0x19008643 /* QM_PORT1_CTRL0 */
|
|
0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
|
|
0x00980 0x19008643 /* QM_PORT2_CTRL0 */
|
|
0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
|
|
0x00988 0x19008643 /* QM_PORT3_CTRL0 */
|
|
0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
|
|
0x00990 0x19008643 /* QM_PORT4_CTRL0 */
|
|
0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
|
|
0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
|
|
0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
|
|
0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
|
|
0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
|
|
>;
|
|
qca,ar8327-vlans = <
|
|
0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
|
|
0x2 0x21 /* VLAN2 Ports 0/5 */
|
|
>;
|
|
};
|
|
|
|
phy4: ethernet-phy@4 {
|
|
reg = <4>;
|
|
qca,ar8327-initvals = <
|
|
0x000e4 0x6a545 /* MAC_POWER_SEL */
|
|
0x0000c 0x80 /* PAD6_MODE */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&gmac1 {
|
|
status = "okay";
|
|
|
|
phy-mode = "rgmii";
|
|
qcom,id = <1>;
|
|
qcom,phy_mdio_addr = <4>;
|
|
qcom,poll_required = <0>;
|
|
qcom,rgmii_delay = <1>;
|
|
qcom,phy_mii_type = <0>;
|
|
qcom,emulation = <0>;
|
|
qcom,irq = <255>;
|
|
mdiobus = <&mdio0>;
|
|
|
|
pinctrl-0 = <&rgmii2_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
nvmem-cells = <&macaddr_art_6>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&gmac2 {
|
|
status = "okay";
|
|
|
|
phy-mode = "sgmii";
|
|
qcom,id = <2>;
|
|
qcom,phy_mdio_addr = <0>; /* none */
|
|
qcom,poll_required = <0>; /* no polling */
|
|
qcom,rgmii_delay = <0>;
|
|
qcom,phy_mii_type = <1>;
|
|
qcom,emulation = <0>;
|
|
qcom,irq = <258>;
|
|
mdiobus = <&mdio0>;
|
|
|
|
nvmem-cells = <&macaddr_art_0>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&adm_dma {
|
|
status = "okay";
|
|
};
|
|
|
|
&sata_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&sata {
|
|
status = "okay";
|
|
};
|
|
|
|
&hs_phy_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ss_phy_0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_0 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&usb0_pwr_en_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&hs_phy_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ss_phy_1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb3_1 {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&usb1_pwr_en_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
|
|
bridge@0,0 {
|
|
reg = <0x00000000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi0: wifi@1,0 {
|
|
compatible = "pci168c,0046";
|
|
reg = <0x00010000 0 0 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "okay";
|
|
|
|
max-link-speed = <1>;
|
|
|
|
bridge@0,0 {
|
|
reg = <0x00000000 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
wifi1: wifi@1,0 {
|
|
compatible = "pci168c,0046";
|
|
reg = <0x00010000 0 0 0 0>;
|
|
};
|
|
};
|
|
};
|