aio-3399b/ImmortalWrt
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ipq807x: add initial support for prpl Foundation Haze board

Browse Source 
Haze is prpl Foundation's reference board (WNC LVRP).

Board info:

 - IPQ8072A SoC
 - 2 GiB RAM
 - 4 GiB eMMC
 - 8MiB SPI NOR (MX25U6435F)

 - 3x 1GigE ports (QCA8075)
 - 1x 10GigE port (AQR113C)
 - 1x SFP cage

 - WiFi 6GHz 160MHz (QCN9074)
 - WiFi 5GHz 80+80MHz (QCN5054)
 - WiFi 2.4G (QCN5024)

 - ARM Standard 20-pin 2.54mm/0.1" JTAG (1V8 !!!)
 - Bluetooth v5.0 + EDR with integrated Class 1 PA (CYW20704)
 - 1x M.2 B-key socket with PCIe 3.0
 - 1x USB 3.0 port
 - UART marked J6 is 4-pin 2.54mm/0.1" connector 3V3(arrow),RX,TX,GND (115200 8N1)
 - Reset and WPS buttons

Flashing instructions:

 1. From U-Boot boot OpenWrt using initramfs image:

    IPQ807x# tftpboot openwrt-ipq807x-generic-prpl_haze-initramfs-uImage.itb && bootm

 2. In OpenWrt running from initramfs execute sysupgrade:

    root@OpenWrt:/# sysupgrade -n /tmp/openwrt-ipq807x-generic-prpl_haze-squashfs-sysupgrade.bin

Work in progress/known issues:

 * SFP feature not implemented/tested
 * M.2 feature not implemented/tested
 * Bluetooth feature not implemented/tested
 * 6GHz wireless should be working, but not tested
 * MAC address assigments for LAN interfaces

Signed-off-by: Petr Štetiar <ynezz@true.cz>
This commit is contained in:
Petr Štetiar 2023-06-05 12:13:04 +02:00
parent c2bb9f055b
commit 2e910039dd
No known key found for this signature in database
GPG Key ID: 58EE120F30CC02D3
6 changed files with 336 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
package/boot/uboot-envtools/files/ipq807x
View File

@ -36,6 +36,11 @@ xiaomi,ax9000)
[ -n "$idx2" ] && \
ubootenv_add_uci_sys_config "/dev/mtd$idx2" "0x0" "0x10000" "0x20000"
;;
prpl,haze)
mmcpart="$(find_mmc_part 0:APPSBLENV)"
[ -n "$mmcpart" ] && \
ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x400" "0x100"
;;
qnap,301w)
idx="$(find_mtd_index 0:appsblenv)"
[ -n "$idx" ] && \

3
target/linux/ipq807x/base-files/etc/board.d/02_network
View File

@ -25,6 +25,9 @@ ipq807x_setup_interfaces()
netgear,wax218)
ucidef_set_interface_lan "lan" "dhcp"
;;
prpl,haze)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
;;
qnap,301w)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
;;

9
target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
View File

@ -22,10 +22,17 @@ case "$FIRMWARE" in
zyxel,nbg7815)
caldata_extract "0:art" 0x1000 0x20000
;;
prpl,haze)
caldata_extract_mmc "0:ART" 0x1000 0x20000
;;
esac
;;
"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin")
"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
case "$board" in
prpl,haze)
caldata_extract_mmc "0:ART" 0x26800 0x20000
;;
xiaomi,ax9000)
caldata_extract "0:art" 0x26800 0x20000
;;

1
target/linux/ipq807x/base-files/lib/upgrade/platform.sh
View File

@ -71,6 +71,7 @@ platform_do_upgrade() {
netgear,wax218)
nand_do_upgrade "$1"
;;
prpl,haze|\
qnap,301w)
kernelname="0:HLOS"
rootfsname="rootfs"

308
target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8072-haze.dts Normal file
View File

@ -0,0 +1,308 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "ipq8074.dtsi"
#include "ipq8074-hk-cpu.dtsi"
#include "ipq8074-ess.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "prpl Foundation Haze";
compatible = "prpl,haze", "qcom,ipq8074";
aliases {
serial0 = &blsp1_uart5;
/* Aliases are required by U-Boot to patch MAC addresses */
ethernet0 = &dp6_syn;
ethernet1 = &dp4;
ethernet2 = &dp3;
ethernet3 = &dp2;
label-mac-device = &dp6_syn;
};
chosen {
stdout-path = "serial0:115200n8";
};
keys {
compatible = "gpio-keys";
pinctrl-0 = <&button_pins>;
pinctrl-names = "default";
wps-button {
label = "wps";
gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset-button {
label = "reset";
gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&tlmm {
mdio_pins: mdio-state {
mdc-pins {
pins = "gpio68";
function = "mdc";
drive-strength = <8>;
bias-pull-up;
};
mdio-pins {
pins = "gpio69";
function = "mdio";
drive-strength = <8>;
bias-pull-up;
};
};
button_pins: button-state {
wps-pins {
pins = "gpio42";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
rst-pins {
pins = "gpio44";
function = "gpio";
drive-strength = <8>;
bias-pull-up;
};
};
};
&blsp1_uart5 {
status = "okay";
};
&prng {
status = "okay";
};
&ssphy_0 {
status = "okay";
};
&qusb_phy_0 {
status = "okay";
};
&ssphy_1 {
status = "okay";
};
&qusb_phy_1 {
status = "okay";
};
&usb_0 {
status = "okay";
};
&usb_1 {
status = "okay";
};
&cryptobam {
status = "okay";
};
&crypto {
status = "okay";
};
&qpic_bam {
status = "okay";
};
&blsp1_spi1 { /* BLSP1 QUP1 */
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
cs-gpios = <0>;
status = "okay";
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
partitions {
compatible = "qcom,smem-part";
};
};
};
&mdio {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
qca8075_1: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
};
qca8075_2: ethernet-phy@1 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <1>;
};
qca8075_3: ethernet-phy@2 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <2>;
};
qca8075_4: ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <3>;
};
aqr113c: ethernet-phy@5 {
compatible ="ethernet-phy-ieee802.3-c45";
reg = <8>;
reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>;
};
};
&sdhc_1 {
status = "okay";
vqmmc-supply = <&l11>;
};
&switch {
status = "okay";
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
switch_lan_bmp = <0x1e>; /* lan port bitmap */
switch_wan_bmp = <0x60>; /* wan port bitmap */
switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
switch_mac_mode1 = <0xe>; /* mac mode for uniphy instance1*/
switch_mac_mode2 = <0xd>; /* mac mode for uniphy instance2*/
bm_tick_mode = <0>; /* bm tick mode */
tm_tick_mode = <0>; /* tm tick mode */
qcom,port_phyinfo {
port@0 {
port_id = <1>;
phy_address = <0>;
};
port@1 {
port_id = <2>;
phy_address = <1>;
};
port@2 {
port_id = <3>;
phy_address = <2>;
};
port@3 {
port_id = <4>;
phy_address = <3>;
};
port@4 {
port_id = <6>;
phy_address = <8>;
compatible = "ethernet-phy-ieee802.3-c45";
ethernet-phy-ieee802.3-c45;
};
};
};
&edma {
status = "okay";
};
/* Dummy LAN port */
&dp1 {
status = "disabled";
phy-handle = <&qca8075_1>;
label = "lan4";
};
&dp2 {
status = "okay";
phy-handle = <&qca8075_2>;
label = "lan3";
};
&dp3 {
status = "okay";
phy-handle = <&qca8075_3>;
label = "lan2";
};
&dp4 {
status = "okay";
phy-handle = <&qca8075_4>;
label = "lan1";
};
&dp6_syn {
status = "okay";
qcom,mactype = <1>;
phy-handle = <&aqr113c>;
label = "wan";
};
&pcie_qmp0 {
status = "okay";
};
&pcie0 {
status = "okay";
perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
bridge@0,0 {
reg = <0x00020000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
};
};
&pcie_qmp1 {
status = "okay";
};
&pcie1 {
status = "okay";
perst-gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
bridge@1,0 {
reg = <0x00010000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
ranges;
wifi@1,0 {
status = "okay";
/* ath11k has no DT compatible for PCI cards */
compatible = "pci17cb,1104";
reg = <0x00010000 0 0 0 0>;
qcom,ath11k-calibration-variant = "prpl-Haze";
};
};
};
&wifi {
status = "okay";
qcom,ath11k-calibration-variant = "prpl-Haze";
};

11
target/linux/ipq807x/image/generic.mk
View File

@ -108,6 +108,17 @@ define Device/netgear_wax218
endef
TARGET_DEVICES += netgear_wax218
define Device/prpl_haze
$(call Device/FitImage)
$(call Device/EmmcImage)
DEVICE_VENDOR := prpl Foundation
DEVICE_MODEL := Haze
DEVICE_DTS_CONFIG := config@hk09
SOC := ipq8072
DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci
endef
TARGET_DEVICES += prpl_haze
define Device/qnap_301w
$(call Device/FitImage)
$(call Device/EmmcImage)