scripts/flashing/flash.sh: Add missing quotes

These are in if statements (where they should be), and echo output that is
not piped to anything. These should be safe.

Found with shellcheck.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
This commit is contained in:
Rosen Penev 2020-01-05 18:27:06 -08:00 committed by Adrian Schmutzler
parent 9a1f4b2f83
commit 34a2780395

View File

@ -20,8 +20,8 @@
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
if [ -z "$1" ] || [ ! -f $1 ] || [ -z $2 ]; then
echo Usage: $0 firmware vendor
if [ -z "$1" ] || [ ! -f "$1" ] || [ -z "$2" ]; then
echo Usage: "$0" firmware vendor
cat << EOF
IMPORTANT:
Notes for Linksys / Asus WL500gx router:
@ -52,15 +52,15 @@ fi
if [ "$2" = "asus" ]; then
echo Confirming IP address setting...
echo -en "get ASUSSPACELINK\x01\x01\xa8\xc0 /dev/null\nquit\n" | tftp 192.168.1.1
echo Flashing 192.168.1.1 using $1...
echo Flashing 192.168.1.1 using "$1"...
echo -en "binary\nput $1 ASUSSPACELINK\nquit\n" | tftp 192.168.1.1
echo Please wait until leds stops flashing.
elif [ "$2" = "linksys" ]; then
echo Flashing 192.168.1.1 using $1...
echo Flashing 192.168.1.1 using "$1"...
echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.1.1
echo Please wait until power led stops flashing. Do not poweroff! Then you can login via telnet 192.168.1.1.
elif [ "$2" = "toshiba" ]; then
echo Flashing 192.168.10.1 using $1...
echo Flashing 192.168.10.1 using "$1"...
echo -en "rexmt 1\ntrace\nbinary\nput $1\nquit\n" | tftp 192.168.10.1
echo Unit will automatically reboot within 5 minutes. Do not power off. Then you can login via telnet 192.168.10.1.
fi