iptables: remove obsolete files
Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45494
This commit is contained in:
Felix Fietkau
parent
af4d04ed36
commit
563c26a34f
|
|
@ -1,28 +0,0 @@
|
|||
# AIM - AOL instant messenger (OSCAR and TOC)
|
||||
# Pattern attributes: good slow notsofast
|
||||
# Protocol groups: chat proprietary
|
||||
# Wiki: http://www.protocolinfo.org/wiki/AIM
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Usually runs on port 5190
|
||||
#
|
||||
# This may also match ICQ traffic.
|
||||
#
|
||||
# This pattern has been tested and is believed to work well.
|
||||
|
||||
aim
|
||||
# See http://gridley.res.carleton.edu/~straitm/final (and various other places)
|
||||
# The first bit matches OSCAR signon and data commands, but not sure what
|
||||
# \x03\x0b matches, but it works apparently.
|
||||
# The next three bits match various parts of the TOC signon process.
|
||||
# The third one is the magic number "*", then 0x01 for "signon", then up to four
|
||||
# bytes ("up to" because l7-filter strips out nulls) which contain a sequence
|
||||
# number (2 bytes) the data length (2 more) and 3 nulls (which don't count),
|
||||
# then 0x01 for the version number (not sure if there ever has been another
|
||||
# version)
|
||||
# The fourth one is a command string, followed by some stuff, then the
|
||||
# beginning of the "roasted" password
|
||||
|
||||
# This pattern is too slow!
|
||||
|
||||
^(\*[\x01\x02].*\x03\x0b|\*\x01.?.?.?.?\x01)|flapon|toc_signon.*0x
|
||||
|
|
@ -1,25 +0,0 @@
|
|||
# Bittorrent - P2P filesharing / publishing tool - http://www.bittorrent.com
|
||||
# Pattern attributes: good slow594 notsofast undermatch
|
||||
# Protocol groups: p2p open_source
|
||||
# Wiki: http://www.protocolinfo.org/wiki/Bittorrent
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# This pattern has been tested and is believed to work well.
|
||||
# It will, however, not work on bittorrent streams that are encrypted, since
|
||||
# it's impossible to match (well) encrypted data.
|
||||
|
||||
bittorrent
|
||||
|
||||
# Does not attempt to match the HTTP download of the tracker
|
||||
# 0x13 is the length of "bittorrent protocol"
|
||||
# Second two bits match UDP wierdness
|
||||
# Next bit matches something Azureus does
|
||||
# Ditto on the next bit. Could also match on "user-agent: azureus", but that's in the next
|
||||
# packet and perhaps this will match multiple clients.
|
||||
# bitcomet-specific strings contributed by liangjun.
|
||||
|
||||
# This is not a valid GNU basic regular expression (but that's ok).
|
||||
^(\x13bittorrent protocol|azver\x01$|get /scrape\?info_hash=get /announce\?info_hash=|get /client/bitcomet/|GET /data\?fid=)|d1:ad2:id20:|\x08'7P\)[RP]
|
||||
|
||||
# This pattern is "fast", but won't catch as much
|
||||
#^(\x13bittorrent protocol|azver\x01$|get /scrape\?info_hash=)
|
||||
|
|
@ -1,37 +0,0 @@
|
|||
# eDonkey2000 - P2P filesharing - http://edonkey2000.com and others
|
||||
# Pattern attributes: good veryfast fast overmatch
|
||||
# Protocol groups: p2p
|
||||
# Wiki: http://www.protocolinfo.org/wiki/EDonkey
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Tested recently (April/May 2006) with eMule 0.47a and eDonkey2000 1.4
|
||||
# and a long time ago with something else.
|
||||
#
|
||||
# In addition to matching what you might expect, this matches much of
|
||||
# what eMule does when you tell it to only connect to the KAD network.
|
||||
# I don't quite know what to make of this.
|
||||
|
||||
# Thanks to Matt Skidmore <fox AT woozle.org>
|
||||
|
||||
edonkey
|
||||
|
||||
# http://gd.tuwien.ac.at/opsys/linux/sf/p/pdonkey/eDonkey-protocol-0.6
|
||||
#
|
||||
# In addition to \xe3, \xc5 and \xd4, I see a lot of \xe5.
|
||||
# As of April 2006, I also see some \xe4.
|
||||
#
|
||||
# God this is a mess. What an irritating protocol.
|
||||
# This will match about 2% of streams with random data in them!
|
||||
# (But fortunately much fewer than 2% of streams that are other protocols.
|
||||
# You can test this with the data in ../testing/)
|
||||
|
||||
^[\xc5\xd4\xe3-\xe5].?.?.?.?([\x01\x02\x05\x14\x15\x16\x18\x19\x1a\x1b\x1c\x20\x21\x32\x33\x34\x35\x36\x38\x40\x41\x42\x43\x46\x47\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f\x50\x51\x52\x53\x54\x55\x56\x57\x58[\x60\x81\x82\x90\x91\x93\x96\x97\x98\x99\x9a\x9b\x9c\x9e\xa0\xa1\xa2\xa3\xa4]|\x59................?[ -~]|\x96....$)
|
||||
|
||||
# matches everything and too much
|
||||
# ^(\xe3|\xc5|\xd4)
|
||||
|
||||
# ipp2p essentially uses "\xe3....\x47", which doesn't seem at all right to me.
|
||||
|
||||
# bandwidtharbitrator uses
|
||||
# e0.*@.*6[a-z].*p$|e0.*@.*[a-z]6[a-z].*p0$|e.*@.*[0-9]6.*p$|emule|edonkey
|
||||
# no comments to explain what all the mush is, of course...
|
||||
|
|
@ -1,23 +0,0 @@
|
|||
# FastTrack - P2P filesharing (Kazaa, Morpheus, iMesh, Grokster, etc)
|
||||
# Pattern attributes: good slow notsofast
|
||||
# Protocol groups: p2p
|
||||
# Wiki: http://www.protocolinfo.org/wiki/Fasttrack
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Tested with Kazaa Lite Resurrection 0.0.7.6F
|
||||
#
|
||||
# This appears to match the download connections well, but not the search
|
||||
# connections (I think they are encrypted :-( ).
|
||||
|
||||
fasttrack
|
||||
# while this is a valid http request, this will be caught because
|
||||
# the http pattern matches the response (and therefore the next packet)
|
||||
# Even so, it's best to put this match earlier in the chain.
|
||||
# http://cvs.berlios.de/cgi-bin/viewcvs.cgi/gift-fasttrack/giFT-FastTrack/PROTOCOL?rev=HEAD&content-type=text/vnd.viewcvs-markup
|
||||
|
||||
# This pattern is kinda slow, but not too bad.
|
||||
^get (/.download/[ -~]*|/.supernode[ -~]|/.status[ -~]|/.network[ -~]*|/.files|/.hash=[0-9a-f]*/[ -~]*) http/1.1|user-agent: kazaa|x-kazaa(-username|-network|-ip|-supernodeip|-xferid|-xferuid|tag)|^give [0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]?[0-9]?[0-9]?
|
||||
|
||||
# This isn't much faster:
|
||||
#^get (/.download/.*|/.supernode.|/.status.|/.network.*|/.files|/.hash=[0-9a-f]*/.*) http/1.1|user-agent: kazaa|x-kazaa(-username|-network|-ip|-supernodeip|-xferid|-xferuid|tag)|^give [0-9][0-9][0-9][0-9][0-9][0-9][0-9][0-9]?[0-9]?[0-9]?
|
||||
|
||||
|
|
@ -1,46 +0,0 @@
|
|||
# FTP - File Transfer Protocol - RFC 959
|
||||
# Pattern attributes: great notsofast fast
|
||||
# Protocol groups: document_retrieval ietf_internet_standard
|
||||
# Wiki: http://protocolinfo.org/wiki/FTP
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Usually runs on port 21. Note that the data stream is on a dynamically
|
||||
# assigned port, which means that you will need the FTP connection
|
||||
# tracking module in your kernel to usefully match FTP data transfers.
|
||||
#
|
||||
# This pattern is well tested.
|
||||
#
|
||||
# Handles the first two things a server should say:
|
||||
#
|
||||
# First, the server says it's ready by sending "220". Most servers say
|
||||
# something after 220, even though they don't have to, and it usually
|
||||
# includes the string "ftp" (l7-filter is case insensitive). This
|
||||
# includes proftpd, vsftpd, wuftpd, warftpd, pureftpd, Bulletproof FTP
|
||||
# Server, and whatever ftp.microsoft.com uses. Almost all servers use only
|
||||
# ASCII printable characters between the "220" and the "FTP", but non-English
|
||||
# ones might use others.
|
||||
#
|
||||
# The next thing the server sends is a 331. All the above servers also
|
||||
# send something including "password" after this code. By default, we
|
||||
# do not match on this because it takes another packet and is more work
|
||||
# for regexec.
|
||||
|
||||
ftp
|
||||
# by default, we allow only ASCII
|
||||
^220[\x09-\x0d -~]*ftp
|
||||
|
||||
# This covers UTF-8 as well
|
||||
#^220[\x09-\x0d -~\x80-\xfd]*ftp
|
||||
|
||||
# This allows any characters and is about 4x faster than either of the above
|
||||
# (which are about the same as each other)
|
||||
#^220.*ftp
|
||||
|
||||
# This is much slower
|
||||
#^220[\x09-\x0d -~]*ftp|331[\x09-\x0d -~]*password
|
||||
|
||||
# This pattern is more precise, but takes longer to match. (3 packets vs. 1)
|
||||
#^220[\x09-\x0d -~]*\x0d\x0aUSER[\x09-\x0d -~]*\x0d\x0a331
|
||||
|
||||
# same as above, but slightly less precise and only takes 2 packets.
|
||||
#^220[\x09-\x0d -~]*\x0d\x0aUSER[\x09-\x0d -~]*\x0d\x0a
|
||||
|
|
@ -1,34 +0,0 @@
|
|||
# Gnutella - P2P filesharing
|
||||
# Pattern attributes: good notsofast notsofast
|
||||
# Protocol groups: p2p open_source
|
||||
# Wiki: http://www.protocolinfo.org/wiki/Gnutella
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# This should match both Gnutella and "Gnutella2" ("Mike's protocol")
|
||||
#
|
||||
# Various clients use this protocol including Mactella, Shareaza,
|
||||
# GTK-gnutella, Gnucleus, Gnotella, LimeWire, iMesh and BearShare.
|
||||
#
|
||||
# This is tested with gtk-gnutella and Shareaza.
|
||||
|
||||
# http://www.gnutella2.com/tiki-index.php?page=UDP%20Transceiver
|
||||
# http://rfc-gnutella.sf.net/
|
||||
# http://www.gnutella2.com/tiki-index.php?page=Gnutella2%20Specification
|
||||
# http://en.wikipedia.org/wiki/Shareaza
|
||||
|
||||
gnutella
|
||||
|
||||
# The first part matches UDP messages - All start with "GND", then have
|
||||
# a flag byte which is either \x00, \x01 or \x02, then two sequence bytes
|
||||
# that can be anything, then a fragment number, which must start at 1.
|
||||
# The rest matches TCP first client message or first server message (in case
|
||||
# we can't see client messages). Some parts of this are empirical rather than
|
||||
# document based. Assumes version is between 0.0 and 2.9. (usually is
|
||||
# 0.4 or 0.6). I'm guessing at many of the user-agents.
|
||||
# The last bit is emprical and probably only matches Limewire.
|
||||
^(gnd[\x01\x02]?.?.?\x01|gnutella connect/[012]\.[0-9]\x0d\x0a|get /uri-res/n2r\?urn:sha1:|get /.*user-agent: (gtk-gnutella|bearshare|mactella|gnucleus|gnotella|limewire|imesh)|get /.*content-type: application/x-gnutella-packets|giv [0-9]*:[0-9a-f]*/|queue [0-9a-f]* [1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?:[1-9][0-9]?[0-9]?[0-9]?|gnutella.*content-type: application/x-gnutella|...................?lime)
|
||||
|
||||
# Needlessly precise, at the expense of time
|
||||
#^(gnd[\x01\x02]?.?.?\x01|gnutella connect/[012]\.[0-9]\x0d\x0a|get /uri-res/n2r\?urn:sha1:|get /[\x09-\x0d -~]*user-agent: (gtk-gnutella|bearshare|mactella|gnucleus|gnotella|limewire|imesh)|get /[\x09-\x0d -~]*content-type: application/x-gnutella-packets|giv [0-9]*:[0-9a-f]*/|queue [0-9a-f]* [1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?\.[1-9][0-9]?[0-9]?:[1-9][0-9]?[0-9]?[0-9]?|gnutella[\x09-\x0d -~]*content-type: application/x-gnutella|..................lime)
|
||||
|
||||
|
||||
|
|
@ -1,28 +0,0 @@
|
|||
# HTTP - HyperText Transfer Protocol - RFC 2616
|
||||
# Pattern attributes: great slow notsofast superset
|
||||
# Protocol groups: document_retrieval ietf_draft_standard
|
||||
# Wiki: http://protocolinfo.org/wiki/HTTP
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Usually runs on port 80
|
||||
#
|
||||
# This pattern has been tested and is believed to work well.
|
||||
#
|
||||
# this intentionally catches the response from the server rather than
|
||||
# the request so that other protocols which use http (like kazaa) can be
|
||||
# caught based on specific http requests regardless of the ordering of
|
||||
# filters... also matches posts
|
||||
|
||||
# Sites that serve really long cookies may break this by pushing the
|
||||
# server response too far away from the beginning of the connection. To
|
||||
# fix this, increase the kernel's data buffer length.
|
||||
|
||||
http
|
||||
# Status-Line = HTTP-Version SP Status-Code SP Reason-Phrase CRLF (rfc 2616)
|
||||
# As specified in rfc 2616 a status code is preceeded and followed by a
|
||||
# space.
|
||||
http/(0\.9|1\.0|1\.1) [1-5][0-9][0-9] [\x09-\x0d -~]*(connection:|content-type:|content-length:|date:)|post [\x09-\x0d -~]* http/[01]\.[019]
|
||||
# A slightly faster version that might be good enough:
|
||||
#http/(0\.9|1\.0|1\.1) [1-5][0-9][0-9]|post [\x09-\x0d -~]* http/[01]\.[019]
|
||||
# old pattern(s):
|
||||
#(http[\x09-\x0d -~]*(200 ok|302 |304 )[\x09-\x0d -~]*(connection:|content-type:|content-length:))|^(post [\x09-\x0d -~]* http/)
|
||||
|
|
@ -1,15 +0,0 @@
|
|||
# Ident - Identification Protocol - RFC 1413
|
||||
# Pattern attributes: good fast fast
|
||||
# Protocol groups: networking ietf_proposed_standard
|
||||
# Wiki: http://www.protocolinfo.org/wiki/Ident
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Usually runs on port 113
|
||||
#
|
||||
# This pattern is believed to work.
|
||||
|
||||
ident
|
||||
# "number , numberCRLF" possibly without the CR and/or LF.
|
||||
# ^$ is appropriate because the first packet should never have anything
|
||||
# else in it.
|
||||
^[1-9][0-9]?[0-9]?[0-9]?[0-9]?[\x09-\x0d]*,[\x09-\x0d]*[1-9][0-9]?[0-9]?[0-9]?[0-9]?(\x0d\x0a|[\x0d\x0a])?$
|
||||
|
|
@ -1,20 +0,0 @@
|
|||
# IRC - Internet Relay Chat - RFC 1459
|
||||
# Pattern attributes: great veryfast fast
|
||||
# Protocol groups: chat ietf_proposed_standard
|
||||
# Wiki: http://www.protocolinfo.org/wiki/IRC
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Usually runs on port 6666 or 6667
|
||||
# Note that chat traffic runs on these ports, but IRC-DCC traffic (which
|
||||
# can use much more bandwidth) uses a dynamically assigned port, so you
|
||||
# must have the IRC connection tracking module in your kernel to classify
|
||||
# this.
|
||||
#
|
||||
# This pattern has been tested and is believed to work well.
|
||||
|
||||
irc
|
||||
# First thing that happens is that the client sends NICK and USER, in
|
||||
# either order. This allows MIRC color codes (\x02-\x0d instead of
|
||||
# \x09-\x0d).
|
||||
^(nick[\x09-\x0d -~]*user[\x09-\x0d -~]*:|user[\x09-\x0d -~]*:[\x02-\x0d -~]*nick[\x09-\x0d -~]*\x0d\x0a)
|
||||
|
||||
|
|
@ -1,24 +0,0 @@
|
|||
# Jabber (XMPP) - open instant messenger protocol - RFC 3920 - http://jabber.org
|
||||
# Pattern attributes: good notsofast notsofast
|
||||
# Protocol groups: chat ietf_proposed_standard
|
||||
# Wiki: http://www.protocolinfo.org/wiki/Jabber
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# This pattern has been tested with Gaim and Gabber. It is only tested
|
||||
# with non-SSL mode Jabber with no proxies.
|
||||
|
||||
# Thanks to Jan Hudec for some improvements.
|
||||
|
||||
# Jabber seems to take a long time to set up a connection. I'm
|
||||
# connecting with Gabber 0.8.8 to 12jabber.org and the first 8 packets
|
||||
# is this:
|
||||
# <stream:stream to='12jabber.com' xmlns='jabber:client'
|
||||
# xmlns:stream='http://etherx.jabber.org/streams'><?xml
|
||||
# version='1.0'?><stream:stream
|
||||
# xmlns:stream='http://etherx.jabber.org/streams' id='3f73e951'
|
||||
# xmlns='jabber:client' from='12jabber.com'>
|
||||
#
|
||||
# No mention of my username or password yet, you'll note.
|
||||
|
||||
jabber
|
||||
<stream:stream[\x09-\x0d ][ -~]*[\x09-\x0d ]xmlns=['"]jabber
|
||||
|
|
@ -1,28 +0,0 @@
|
|||
# MSN Messenger - Microsoft Network chat client
|
||||
# Pattern attributes: good slow notsofast
|
||||
# Protocol groups: chat proprietary
|
||||
# Wiki: http://www.protocolinfo.org/wiki/MSN_Messenger
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Usually uses TCP port 1863
|
||||
# http://www.hypothetic.org/docs/msn/index.php
|
||||
# http://msnpiki.msnfanatic.com/
|
||||
#
|
||||
# This pattern has been tested and is believed to work well.
|
||||
|
||||
msnmessenger
|
||||
|
||||
# First branch: login
|
||||
# ver: allow versions up to 99.
|
||||
# I've never seen a cvr other than cvr0. Maybe this will be trouble later?
|
||||
# Can't anchor at the beginning because sometimes this is encapsulated in
|
||||
# HTTP. But either way, the first packet ends like this.
|
||||
# Second/Third branches: accepting/sending a message
|
||||
# I will assume that these can also be encapsulated in HTTP, although I have
|
||||
# not checked. Example of each direction:
|
||||
# ANS 1 quadong@hotmail.com 1139803431.29427 17522047
|
||||
# USR 1 quadong@hotmail.com 530423708.968145.366138
|
||||
|
||||
# Branches are written entirely separately for better performance.
|
||||
ver [0-9]+ msnp[1-9][0-9]? [\x09-\x0d -~]*cvr0\x0d\x0a$|usr 1 [!-~]+ [0-9. ]+\x0d\x0a$|ans 1 [!-~]+ [0-9. ]+\x0d\x0a$
|
||||
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
# (S)NTP - (Simple) Network Time Protocol - RFCs 1305 and 2030
|
||||
# Pattern attributes: good fast fast overmatch
|
||||
# Protocol groups: time_synchronization ietf_draft_standard
|
||||
# Wiki: http://www.protocolinfo.org/wiki/NTP
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# This pattern is tested and is believed to work.
|
||||
|
||||
# client|server
|
||||
# Requires the server's timestamp to be in the present or future (of 2005).
|
||||
# Tested with ntpdate on Linux.
|
||||
# Assumes version 2, 3 or 4.
|
||||
|
||||
# Note that ntp packets are always 48 bytes, so you should match on that too.
|
||||
|
||||
ntp
|
||||
^([\x13\x1b\x23\xd3\xdb\xe3]|[\x14\x1c$].......?.?.?.?.?.?.?.?.?[\xc6-\xff])
|
||||
|
|
@ -1,50 +0,0 @@
|
|||
# POP3 - Post Office Protocol version 3 (popular e-mail protocol) - RFC 1939
|
||||
# Pattern attributes: great veryfast fast
|
||||
# Protocol groups: mail ietf_internet_standard
|
||||
# Wiki: http://www.protocolinfo.org/wiki/POP
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# This pattern has been tested somewhat.
|
||||
|
||||
# this is a difficult protocol to match because of the relative lack of
|
||||
# distinguishing information. Read on.
|
||||
pop3
|
||||
|
||||
# this the most conservative pattern. It should definitely work.
|
||||
#^(\+ok|-err)
|
||||
|
||||
# this pattern assumes that the server says _something_ after +ok or -err
|
||||
# I think this is probably the way to go.
|
||||
^(\+ok |-err )
|
||||
|
||||
# more that 90% of servers seem to say "pop" after "+ok", but not all.
|
||||
#^(\+ok .*pop)
|
||||
|
||||
# Here's another tack. I think this is my second favorite.
|
||||
#^(\+ok [\x09-\x0d -~]*(ready|hello|pop|starting)|-err [\x09-\x0d -~]*(invalid|unknown|unimplemented|unrecognized|command))
|
||||
|
||||
# this matches the server saying "you have N messages that are M bytes",
|
||||
# which the client probably asks for early in the session (not tested)
|
||||
#\+ok [0-9]+ [0-9]+
|
||||
|
||||
# some sample servers:
|
||||
# RFC example: +OK POP3 server ready <1896.697170952@dbc.mtview.ca.us>
|
||||
# mail.dreamhost.com: +OK Hello there.
|
||||
# pop.carleton.edu: +OK POP3D(*) Server PMDFV6.2.2 at Fri, 12 Sep 2003 19:28:10 -0500 (CDT) (APOP disabled)
|
||||
# mail.earthlink.net: +OK NGPopper vEL_4_38 at earthlink.net ready <25509.1063412951@falcon>
|
||||
# *.email.umn.edu: +OK Cubic Circle's v1.22 1998/04/11 POP3 ready <7d1e0000da67623f@aquamarine.tc.umn.edu>
|
||||
# mail.yale.edu: +OK POP3 pantheon-po01 v2002.81 server ready
|
||||
# mail.gustavus.edu: +OK POP3 solen v2001.78 server ready
|
||||
# mail.reed.edu: +OK POP3 letra.reed.edu v2002.81 server ready
|
||||
# mail.bowdoin.edu: +OK mail.bowdoin.edu POP3 service (iPlanet Messaging Server 5.2 HotFix 1.15 (built Apr 28 2003))
|
||||
# pop.colby.edu: +OK Qpopper (version 4.0.5) at basalt starting.
|
||||
# mail.mac.com: +OK Netscape Messaging Multiplexor ready
|
||||
|
||||
# various error strings:
|
||||
#-ERR Invalid command.
|
||||
#-ERR invalid command
|
||||
#-ERR unimplemented
|
||||
#-ERR Invalid command, try one of: USER name, PASS string, QUIT
|
||||
#-ERR Unknown AUTHORIZATION state command
|
||||
#-ERR Unrecognized command
|
||||
#-ERR Unknown command: "sadf'".
|
||||
|
|
@ -1,40 +0,0 @@
|
|||
# SMTP - Simple Mail Transfer Protocol - RFC 2821 (See also RFC 1869)
|
||||
# Pattern attributes: great notsofast fast
|
||||
# Protocol groups: mail ietf_internet_standard
|
||||
# Wiki: http://www.protocolinfo.org/wiki/SMTP
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# usually runs on port 25
|
||||
#
|
||||
# This pattern has been tested and is believed to work well.
|
||||
|
||||
# As usual, no text is required after "220", but all known servers have some
|
||||
# there. It (almost?) always has string "smtp" in it. The RFC examples
|
||||
# does not, so we match those too, just in case anyone has copied them
|
||||
# literally.
|
||||
#
|
||||
# Some examples:
|
||||
# 220 mail.stalker.com ESMTP CommuniGate Pro 4.1.3
|
||||
# 220 mail.vieodata.com ESMTP Merak 6.1.0; Mon, 15 Sep 2003 13:48:11 -0400
|
||||
# 220 mail.ut.caldera.com ESMTP
|
||||
# 220 persephone.pmail.gen.nz ESMTP server ready.
|
||||
# 220 smtp1.superb.net ESMTP
|
||||
# 220 mail.kerio.com Kerio MailServer 5.6.7 ESMTP ready
|
||||
# 220-mail.deerfield.com ESMTP VisNetic.MailServer.v6.0.9.0; Mon, 15 Sep 2003 13:4
|
||||
# 220 altn.com ESMTP MDaemon 6.8.5; Mon, 15 Sep 2003 12:46:42 -0500
|
||||
# 220 X1 NT-ESMTP Server ipsmin0165atl2.interland.net (IMail 6.06 73062-3)
|
||||
# 220 mail.icewarp.com ESMTP Merak 6.1.1; Mon, 15 Sep 2003 19:43:23 +0200
|
||||
# 220-mail.email-scan.com ESMTP
|
||||
# 220 smaug.dreamhost.com ESMTP
|
||||
# 220 kona.carleton.edu -- Server ESMTP (PMDF V6.2#30648)
|
||||
# 220 letra.reed.edu ESMTP Sendmail 8.12.9/8.12.9; Mon, 15 Sep 2003 10:35:57 -0700 (PDT)
|
||||
# 220-swan.mail.pas.earthlink.net ESMTP Exim 3.33 #1 Mon, 15 Sep 2003 10:32:15 -0700
|
||||
#
|
||||
# RFC examples:
|
||||
# 220 xyz.com Simple Mail Transfer Service Ready (RFC example)
|
||||
# 220 dbc.mtview.ca.us SMTP service ready
|
||||
|
||||
smtp
|
||||
^220[\x09-\x0d -~]* (e?smtp|simple mail)
|
||||
userspace pattern=^220[\x09-\x0d -~]* (E?SMTP|[Ss]imple [Mm]ail)
|
||||
userspace flags=REG_NOSUB REG_EXTENDED
|
||||
|
|
@ -1,16 +0,0 @@
|
|||
# SSL and TLS - Secure Socket Layer / Transport Layer Security - RFC 2246
|
||||
# Pattern attributes: good notsofast fast superset
|
||||
# Protocol groups: secure ietf_proposed_standard
|
||||
# Wiki: http://www.protocolinfo.org/wiki/SSL
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# Usually runs on port 443
|
||||
#
|
||||
# This is a superset of validcertssl. For it to match, it must be first.
|
||||
#
|
||||
# This pattern has been tested and is believed to work well.
|
||||
|
||||
ssl
|
||||
# Server Hello with certificate | Client Hello
|
||||
# This allows SSL 3.X, which includes TLS 1.0, known internally as SSL 3.1
|
||||
^(.?.?\x16\x03.*\x16\x03|.?.?\x01\x03\x01?.*\x0b)
|
||||
|
|
@ -1,23 +0,0 @@
|
|||
# VNC - Virtual Network Computing. Also known as RFB - Remote Frame Buffer
|
||||
# Pattern attributes: great veryfast fast
|
||||
# Protocol groups: remote_access
|
||||
# Wiki: http://www.protocolinfo.org/wiki/VNC
|
||||
# Copyright (C) 2008 Matthew Strait, Ethan Sommer; See ../LICENSE
|
||||
#
|
||||
# http://www.realvnc.com/documentation.html
|
||||
#
|
||||
# This pattern has been verified with vnc v3.3.7 on WinXP and Linux
|
||||
#
|
||||
# Thanks to Trevor Paskett <tpaskett AT cymphonix.com> for this pattern.
|
||||
|
||||
vnc
|
||||
# Assumes single digit major and minor version numbers
|
||||
# This message should be all alone in the first packet, so ^$ is appropriate
|
||||
^rfb 00[1-9]\.00[0-9]\x0a$
|
||||
|
||||
# This is a more restrictive version which assumes the version numbers
|
||||
# are ones actually in existance at the time of this writing, i.e. 3.3,
|
||||
# 3.7 and 3.8 (with some clients wrongly reporting 3.5). It should be
|
||||
# slightly faster, but probably not worth the extra maintenance.
|
||||
# ^rfb 003\.00[3578]\x0a$
|
||||
|
||||
Loading…
Reference in New Issue
Block a user