mpc85xx: add support for Enterasys WS-AP3715i
Hardware
--------
SoC: NXP P1010 (1x e500 @ 800MHz)
RAM: 256M DDR3 (2x Samsung K4B1G1646G-BCH9)
FLASH: 32M NOR (Spansion S25FL256S)
BTN: 1x Reset
WiFi: 1x Atheros AR9590 2.4 bgn 3x3
2x Atheros AR9590 5.0 an 3x3
ETH: 2x Gigabit Ethernet (Atheros AR8033 / AR8035)
UART: 115200 8N1 (RJ-45 Cisco)
Installation
------------
1. Grab the OpenWrt initramfs, rename it to ap3715.bin. Place it in
the root directory of a TFTP server and serve it at
192.168.1.66/24.
2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
by pressing Enter when prompted. Credentials are identical to the one
in the APs interface. By default it is admin / new2day.
3. Alter the bootcmd in U-Boot:
$ setenv ramboot_openwrt "setenv ipaddr 192.168.1.1;
setenv serverip 192.168.1.66; tftpboot 0x2000000 ap3715.bin; bootm"
$ setenv boot_openwrt "sf probe 0; sf read 0x2000000 0x140000 0x1000000;
bootm 0x2000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
4. Boot the initramfs image
$ run ramboot_openwrt
5. Transfer the OpenWrt sysupgrade image to the AP using SCP. Install
using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
Signed-off-by: David Bauer <mail@david-bauer.net>
This commit is contained in:
David Bauer
parent
f058dad1b6
commit
765f66810a
|
|
@ -8,6 +8,10 @@ touch /etc/config/ubootenv
|
|||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
enterasys,ws-ap3715i)
|
||||
ubootenv_add_uci_config "$(find_mtd_part 'cfg1')" "0x0" "0x10000" "0x10000"
|
||||
ubootenv_add_uci_config "$(find_mtd_part 'cfg2')" "0x0" "0x10000" "0x10000"
|
||||
;;
|
||||
extreme-networks,ws-ap3825i)
|
||||
ubootenv_add_uci_config "$(find_mtd_part 'cfg1')" "0x0" "0x10000" "0x20000"
|
||||
ubootenv_add_uci_config "$(find_mtd_part 'cfg2')" "0x0" "0x10000" "0x20000"
|
||||
|
|
|
|||
|
|
@ -8,6 +8,7 @@ boardname="${board##*,}"
|
|||
board_config_update
|
||||
|
||||
case $board in
|
||||
enterasys,ws-ap3715i|\
|
||||
extreme-networks,ws-ap3825i)
|
||||
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth1"
|
||||
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth0"
|
||||
|
|
|
|||
|
|
@ -9,7 +9,8 @@ board_config_update
|
|||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
aerohive,hiveap-330)
|
||||
aerohive,hiveap-330|\
|
||||
enterasys,ws-ap3715i)
|
||||
ucidef_set_interfaces_lan_wan "eth1" "eth0"
|
||||
;;
|
||||
ocedo,panda)
|
||||
|
|
|
|||
|
|
@ -12,6 +12,10 @@ PHYNBR=${DEVPATH##*/phy}
|
|||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
enterasys,ws-ap3715i)
|
||||
[ "$PHYNBR" -eq 0 ] && mtd_get_mac_ascii cfg2 RADIOADDR1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" -eq 1 ] && mtd_get_mac_ascii cfg2 RADIOADDR0 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
enterasys,ws-ap3710i|\
|
||||
extreme-networks,ws-ap3825i)
|
||||
mtd_get_mac_ascii cfg2 RADIOADDR${PHYNBR} > /sys${DEVPATH}/macaddress
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@
|
|||
|
||||
preinit_set_mac_address() {
|
||||
case $(board_name) in
|
||||
enterasys,ws-ap3715i|\
|
||||
extreme-networks,ws-ap3825i)
|
||||
ip link set dev eth0 address $(mtd_get_mac_ascii cfg1 ethaddr)
|
||||
ip link set dev eth1 address $(mtd_get_mac_ascii cfg1 eth1addr)
|
||||
|
|
|
|||
|
|
@ -262,6 +262,7 @@ CONFIG_VDSO32=y
|
|||
CONFIG_VM_EVENT_COUNTERS=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
# CONFIG_WS_AP3710I is not set
|
||||
# CONFIG_WS_AP3715I is not set
|
||||
# CONFIG_WS_AP3825I is not set
|
||||
# CONFIG_XES_MPC85xx is not set
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
|
|
|
|||
293
target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3715i.dts
Normal file
293
target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3715i.dts
Normal file
|
|
@ -0,0 +1,293 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later or MIT
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/include/ "fsl/p1010si-pre.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Enterasys WS-AP3715i";
|
||||
compatible = "enterasys,ws-ap3715i";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_red;
|
||||
label-mac-device = &enet0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x10000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wifi1 {
|
||||
gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:radio1";
|
||||
linux,default-trigger = "phy1tpt";
|
||||
};
|
||||
|
||||
wifi2 {
|
||||
gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:radio2";
|
||||
linux,default-trigger = "phy0tpt";
|
||||
};
|
||||
|
||||
led_power_green: power_green {
|
||||
gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:power";
|
||||
};
|
||||
|
||||
led_power_red: power_red {
|
||||
gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
label = "red:power";
|
||||
};
|
||||
|
||||
lan1_red {
|
||||
gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>;
|
||||
label = "red:lan1";
|
||||
};
|
||||
|
||||
lan1_green {
|
||||
gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:lan1";
|
||||
};
|
||||
|
||||
lan2_red {
|
||||
gpios = <&spi_gpio 7 GPIO_ACTIVE_HIGH>;
|
||||
label = "red:lan2";
|
||||
};
|
||||
|
||||
lan2_green {
|
||||
gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>;
|
||||
label = "green:lan2";
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc@ffe00000 {
|
||||
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
||||
|
||||
gpio0: gpio-controller@fc00 {
|
||||
};
|
||||
|
||||
usb@22000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio@24000 {
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0x1>;
|
||||
};
|
||||
|
||||
phy2: ethernet-phy@2 {
|
||||
reg = <0x2>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@25000 {
|
||||
tbi_phy: tbi-phy@11 {
|
||||
reg = <0x11>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio@26000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet0: ethernet@b0000 {
|
||||
phy-handle = <&phy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
enet1: ethernet@b1000 {
|
||||
phy-handle = <&phy2>;
|
||||
phy-connection-type = "sgmii";
|
||||
|
||||
tbi-handle = <&tbi_phy>;
|
||||
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
enet2: ethernet@b2000 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhc@2e000 {
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
ifc: ifc@ffe1e000 {
|
||||
};
|
||||
|
||||
pci0: pcie@ffe09000 {
|
||||
reg = <0 0xffe09000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0xa0000000
|
||||
0x2000000 0x0 0xa0000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
|
||||
wifi@0,0,0 {
|
||||
compatible = "pci168c,0033";
|
||||
reg = <0x0 0 0 0 0>;
|
||||
ieee80211-freq-limit = <2400000 2500000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pci1: pcie@ffe0a000 {
|
||||
reg = <0 0xffe0a000 0 0x1000>;
|
||||
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
|
||||
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
|
||||
pcie@0 {
|
||||
ranges = <0x2000000 0x0 0x80000000
|
||||
0x2000000 0x0 0x80000000
|
||||
0x0 0x20000000
|
||||
|
||||
0x1000000 0x0 0x0
|
||||
0x1000000 0x0 0x0
|
||||
0x0 0x100000>;
|
||||
|
||||
wifi@0,0,0 {
|
||||
compatible = "pci168c,0033";
|
||||
reg = <0x0 0 0 0 0>;
|
||||
ieee80211-freq-limit = <5000000 6000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&soc {
|
||||
led_spi {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sck-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
|
||||
mosi-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
|
||||
num-chipselects = <0>;
|
||||
|
||||
spi_gpio: led_gpio@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
registers-number = <1>;
|
||||
spi-max-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
|
||||
spi0: spi@7000 {
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <25000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
reg = <0x0 0xa0000>;
|
||||
label = "boot-bak";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
reg = <0xa0000 0xa0000>;
|
||||
label = "boot-pri";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@120000 {
|
||||
reg = <0x120000 0x10000>;
|
||||
label = "cfg1";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@130000 {
|
||||
reg = <0x130000 0x10000>;
|
||||
label = "cfg2";
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
compatible = "denx,uimage";
|
||||
reg = <0x140000 0x1d80000>;
|
||||
label = "firmware";
|
||||
};
|
||||
|
||||
partition@1ec0000 {
|
||||
reg = <0x1ec0000 0x100000>;
|
||||
label = "nvram";
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "fsl/p1010si-post.dtsi"
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
PowerPC,P1010@0 {
|
||||
bus-frequency = <399999996>;
|
||||
timebase-frequency = <50000000>;
|
||||
clock-frequency = <799999992>;
|
||||
d-cache-block-size = <0x20>;
|
||||
d-cache-size = <0x8000>;
|
||||
d-cache-sets = <0x80>;
|
||||
i-cache-block-size = <0x20>;
|
||||
i-cache-size = <0x8000>;
|
||||
i-cache-sets = <0x80>;
|
||||
};
|
||||
};
|
||||
|
||||
soc@ffe00000 {
|
||||
bus-frequency = <399999996>;
|
||||
|
||||
serial@4600 {
|
||||
clock-frequency = <399999996>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
serial@4500 {
|
||||
clock-frequency = <399999996>;
|
||||
};
|
||||
|
||||
pic@40000 {
|
||||
clock-frequency = <399999996>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* For the OpenWrt 22.03 release, since Linux 5.10.138 now uses
|
||||
* aliases to determine PCI domain numbers, drop aliases so as not to
|
||||
* change the sysfs path of our wireless netdevs.
|
||||
*/
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
/delete-property/ pci0;
|
||||
/delete-property/ pci1;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,87 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
/*
|
||||
* Enterasys WS-AP3715i Board Setup
|
||||
*
|
||||
* Copyright (C) 2023 David Bauer <mail@david-bauer.net>
|
||||
*
|
||||
* Based on:
|
||||
* p1010rdb.c:
|
||||
* P1010 RDB Board Setup
|
||||
* Copyright 2011 Freescale Semiconductor Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#include <linux/stddef.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#include <asm/time.h>
|
||||
#include <asm/machdep.h>
|
||||
#include <asm/pci-bridge.h>
|
||||
#include <mm/mmu_decl.h>
|
||||
#include <asm/prom.h>
|
||||
#include <asm/udbg.h>
|
||||
#include <asm/mpic.h>
|
||||
|
||||
#include <sysdev/fsl_soc.h>
|
||||
#include <sysdev/fsl_pci.h>
|
||||
|
||||
#include "mpc85xx.h"
|
||||
|
||||
void __init wsap3715i_pic_init(void)
|
||||
{
|
||||
struct mpic *mpic;
|
||||
|
||||
mpic = mpic_alloc(NULL, 0,
|
||||
MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU,
|
||||
0, 256, " OpenPIC ");
|
||||
|
||||
BUG_ON(mpic == NULL);
|
||||
mpic_init(mpic);
|
||||
}
|
||||
|
||||
/*
|
||||
* Setup the architecture
|
||||
*/
|
||||
static void __init wsap3715i_setup_arch(void)
|
||||
{
|
||||
if (ppc_md.progress)
|
||||
ppc_md.progress("wsap3715i_setup_arch()", 0);
|
||||
|
||||
fsl_pci_assign_primary();
|
||||
|
||||
pr_info("WS-AP3715i from Enterasys\n");
|
||||
}
|
||||
|
||||
machine_arch_initcall(wsap3715i, mpc85xx_common_publish_devices);
|
||||
|
||||
/*
|
||||
* Called very early, device-tree isn't unflattened
|
||||
*/
|
||||
static int __init wsap3715i_probe(void)
|
||||
{
|
||||
if (of_machine_is_compatible("enterasys,ws-ap3715i"))
|
||||
return 1;
|
||||
return 0;
|
||||
}
|
||||
|
||||
define_machine(wsap3715i) {
|
||||
.name = "P1010 RDB",
|
||||
.probe = wsap3715i_probe,
|
||||
.setup_arch = wsap3715i_setup_arch,
|
||||
.init_IRQ = wsap3715i_pic_init,
|
||||
#ifdef CONFIG_PCI
|
||||
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
|
||||
.pcibios_fixup_phb = fsl_pcibios_fixup_phb,
|
||||
#endif
|
||||
.get_irq = mpic_get_irq,
|
||||
.calibrate_decr = generic_calibrate_decr,
|
||||
.progress = udbg_progress,
|
||||
};
|
||||
|
|
@ -14,6 +14,19 @@ define Build/spi-loader-okli
|
|||
mv "$@.new" "$@"
|
||||
endef
|
||||
|
||||
define Device/enterasys_ws-ap3715i
|
||||
DEVICE_VENDOR := Enterasys
|
||||
DEVICE_MODEL := WS-AP3715i
|
||||
BLOCKSIZE := 64k
|
||||
KERNEL_NAME := simpleImage.ws-ap3715i
|
||||
KERNEL_ENTRY := 0x1000000
|
||||
KERNEL_LOADADDR := 0x1000000
|
||||
KERNEL = kernel-bin | lzma | uImage lzma
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += enterasys_ws-ap3715i
|
||||
|
||||
define Device/tplink_tl-wdr4900-v1
|
||||
DEVICE_VENDOR := TP-Link
|
||||
DEVICE_MODEL := TL-WDR4900
|
||||
|
|
|
|||
|
|
@ -1,9 +1,11 @@
|
|||
CONFIG_AT803X_PHY=y
|
||||
CONFIG_CMDLINE_OVERRIDE=y
|
||||
# CONFIG_FSL_CORENET_CF is not set
|
||||
CONFIG_GPIO_74X164=y
|
||||
CONFIG_MTD_NAND_FSL_IFC=y
|
||||
CONFIG_MTD_SPLIT_FIRMWARE=y
|
||||
CONFIG_MTD_SPLIT_TPLINK_FW=y
|
||||
CONFIG_MTD_SPLIT_UIMAGE_FW=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
|
|
@ -18,6 +20,8 @@ CONFIG_REALTEK_PHY=y
|
|||
CONFIG_RED_15W_REV1=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_SPI_GPIO=y
|
||||
CONFIG_TL_WDR4900_V1=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_WS_AP3715I=y
|
||||
CONFIG_FIREBOX_T10=y
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
BOARDNAME:=P1010
|
||||
KERNEL_IMAGES:=simpleImage.tl-wdr4900-v1
|
||||
KERNEL_IMAGES:=simpleImage.tl-wdr4900-v1 simpleImage.ws-ap3715i
|
||||
|
||||
define Target/Description
|
||||
Build firmware images for P1010 based boards.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,50 @@
|
|||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -82,6 +82,17 @@ config WS_AP3710I
|
||||
This board is a Concurrent Dual-Band wireless access point with a
|
||||
Freescale P1020 SoC.
|
||||
|
||||
+config WS_AP3715I
|
||||
+ bool "Enterasys WS-AP3715i"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the Enterasys WS-AP3715i board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless access point with a
|
||||
+ Freescale P1010 SoC.
|
||||
+
|
||||
config WS_AP3825I
|
||||
bool "Extreme Networks WS-AP3825i"
|
||||
select DEFAULT_UIMAGE
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
obj-$(CONFIG_PANDA) += panda.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
|
||||
+obj-$(CONFIG_WS_AP3715I) += ws-ap3715i.o
|
||||
obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o
|
||||
obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -340,6 +340,7 @@ image-$(CONFIG_TQM8560) += cuImage.tqm
|
||||
image-$(CONFIG_SBC8548) += cuImage.sbc8548
|
||||
image-$(CONFIG_KSI8560) += cuImage.ksi8560
|
||||
image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
|
||||
+image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i
|
||||
image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i
|
||||
# Board ports in arch/powerpc/platform/86xx/Kconfig
|
||||
image-$(CONFIG_MVME7100) += dtbImage.mvme7100
|
||||
--- a/arch/powerpc/boot/wrapper
|
||||
+++ b/arch/powerpc/boot/wrapper
|
||||
@@ -324,6 +324,7 @@ adder875-redboot)
|
||||
platformo="$object/fixed-head.o $object/redboot-8xx.o"
|
||||
binary=y
|
||||
;;
|
||||
+simpleboot-ws-ap3715i|\
|
||||
simpleboot-ws-ap3825i|\
|
||||
simpleboot-tl-wdr4900-v1)
|
||||
platformo="$object/fixed-head.o $object/simpleboot.o"
|
||||
|
|
@ -0,0 +1,50 @@
|
|||
--- a/arch/powerpc/platforms/85xx/Kconfig
|
||||
+++ b/arch/powerpc/platforms/85xx/Kconfig
|
||||
@@ -82,6 +82,17 @@ config WS_AP3710I
|
||||
This board is a Concurrent Dual-Band wireless access point with a
|
||||
Freescale P1020 SoC.
|
||||
|
||||
+config WS_AP3715I
|
||||
+ bool "Enterasys WS-AP3715i"
|
||||
+ select DEFAULT_UIMAGE
|
||||
+ select ARCH_REQUIRE_GPIOLIB
|
||||
+ select GPIO_MPC8XXX
|
||||
+ help
|
||||
+ This option enables support for the Enterasys WS-AP3715i board.
|
||||
+
|
||||
+ This board is a Concurrent Dual-Band wireless access point with a
|
||||
+ Freescale P1010 SoC.
|
||||
+
|
||||
config WS_AP3825I
|
||||
bool "Extreme Networks WS-AP3825i"
|
||||
select DEFAULT_UIMAGE
|
||||
--- a/arch/powerpc/platforms/85xx/Makefile
|
||||
+++ b/arch/powerpc/platforms/85xx/Makefile
|
||||
@@ -27,6 +27,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
|
||||
obj-$(CONFIG_PANDA) += panda.o
|
||||
obj-$(CONFIG_TWR_P102x) += twr_p102x.o
|
||||
obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
|
||||
+obj-$(CONFIG_WS_AP3715I) += ws-ap3715i.o
|
||||
obj-$(CONFIG_WS_AP3825I) += ws-ap3825i.o
|
||||
obj-$(CONFIG_FIREBOX_T10) += firebox_t10.o
|
||||
obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
|
||||
--- a/arch/powerpc/boot/Makefile
|
||||
+++ b/arch/powerpc/boot/Makefile
|
||||
@@ -346,6 +346,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
|
||||
image-$(CONFIG_TQM8560) += cuImage.tqm8560
|
||||
image-$(CONFIG_KSI8560) += cuImage.ksi8560
|
||||
image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
|
||||
+image-$(CONFIG_WS_AP3715I) += simpleImage.ws-ap3715i
|
||||
image-$(CONFIG_WS_AP3825I) += simpleImage.ws-ap3825i
|
||||
# Board ports in arch/powerpc/platform/86xx/Kconfig
|
||||
image-$(CONFIG_MVME7100) += dtbImage.mvme7100
|
||||
--- a/arch/powerpc/boot/wrapper
|
||||
+++ b/arch/powerpc/boot/wrapper
|
||||
@@ -326,6 +326,7 @@ adder875-redboot)
|
||||
platformo="$object/fixed-head.o $object/redboot-8xx.o"
|
||||
binary=y
|
||||
;;
|
||||
+simpleboot-ws-ap3715i|\
|
||||
simpleboot-ws-ap3825i|\
|
||||
simpleboot-tl-wdr4900-v1)
|
||||
platformo="$object/fixed-head.o $object/simpleboot.o"
|
||||
Loading…
Reference in New Issue
Block a user