ramips: add support for I-O DATA WN-DEAX1800GR
I-O DATA WN-DEAX1800GR is a 2.4/5 GHz band 11ax (Wi-Fi 6) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 256 MiB (Nanya NT5CC128M16JR-EK) - Flash : RAW NAND 128 MiB (Winbond W29N01HVSINF) - WLAN : 2.4/5 GHz (MediaTek MT7915) - Ethernet : 5x 10/100/1000 Mbps - Switch : MT7530 (SoC) - LEDs/Keys : 6x/3x - UART : through-hole on PCB (J2) - assignment: 3.3V, GND, TX, RX from "1" marking - settings : 115200n8 - Power : 12 VDC, 1 A Flash instruction using initramfs-factory image: 1. Boot WN-DEAX1800GR normally 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt initramfs-factory.bin image and click update ("更新") button to perform firmware update 4. On the initramfs image, perform sysupgrade with the squashfs-sysupgrade.bin image 5. Wait ~120 seconds to complete flashing Note: - This device has 2x OS images on the flash storage. In this support, the first one will be used. Warning: - Do not use "saveenv" command on U-Boot CLI. This device has wrong u-boot-env data. The actual length of individual env data installed to the device is 0x1000 (4 KiB), but installed U-Boot requires 0x20000 (128 KiB). So U-Boot determines the data is invalid. Then, if you perform saving environment data with saveenv on U-Boot CLI, installed env data will be overwritten with too few default values without individual values (SSID, password, MAC addresses, etc...). MAC addresses: LAN : 50:41:B9:xx:xx:F4 (Config, ethaddr (text)) WAN : 50:41:B9:xx:xx:F6 (Config, wanaddr (text)) 2.4 GHz: 50:41:B9:xx:xx:F4 (Config, rmac (text) / Factory, 0x4 (hex)) 5 GHz : 50:41:B9:xx:xx:F5 (none) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
This commit is contained in:
INAGAKI Hiroshi
Hauke Mehrtens
parent
9088b5445f
commit
ac68fbf526
239
target/linux/ramips/dts/mt7621_iodata_wn-deax1800gr.dts
Normal file
239
target/linux/ramips/dts/mt7621_iodata_wn-deax1800gr.dts
Normal file
|
|
@ -0,0 +1,239 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621.dtsi"
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
compatible = "iodata,wn-deax1800gr", "mediatek,mt7621-soc";
|
||||
model = "I-O DATA WN-DEAX1800GR";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_status_green;
|
||||
led-failsafe = &led_status_red;
|
||||
led-upgrade = &led_status_green;
|
||||
label-mac-device = &gmac1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_status_green: led-0 {
|
||||
label = "green:status";
|
||||
gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
led_status_red: led-1 {
|
||||
label = "red:status";
|
||||
gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
label = "green:wps_wifi";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WPS;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led-4 {
|
||||
label = "green:router";
|
||||
gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
};
|
||||
|
||||
led-5 {
|
||||
label = "green:internet";
|
||||
gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_WAN;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
|
||||
led_on {
|
||||
label = "led_on";
|
||||
gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <BTN_0>;
|
||||
linux,input-type = <EV_SW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
mediatek,nmbm;
|
||||
mediatek,bmt-remap-range =
|
||||
<0x0000000 0x780000>, /* u-boot - kernel1(6 MiB) */
|
||||
<0x2f80000 0x600000>, /* kernel2 - kernel2(6 MiB) */
|
||||
<0x5d80000 0x780000>; /* storage - working */
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x80000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
compatible = "nvmem-cells";
|
||||
label = "factory";
|
||||
reg = <0x100000 0x80000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
eeprom: eeprom@0 {
|
||||
reg = <0x0 0x1aa20>;
|
||||
};
|
||||
|
||||
macaddr_factory_4: macaddr@4 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x4 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "kernel";
|
||||
reg = <0x180000 0x600000>;
|
||||
};
|
||||
|
||||
partition@580000 {
|
||||
label = "ubi";
|
||||
reg = <0x780000 0x2800000>;
|
||||
};
|
||||
|
||||
partition@2f80000 {
|
||||
label = "firmware2";
|
||||
reg = <0x2f80000 0x2e00000>;
|
||||
};
|
||||
|
||||
partition@5d80000 {
|
||||
label = "storage";
|
||||
reg = <0x5d80000 0x600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6380000 {
|
||||
label = "idmkey";
|
||||
reg = <0x6380000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@6480000 {
|
||||
label = "working";
|
||||
reg = <0x6480000 0x80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_factory_4 0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy0>;
|
||||
|
||||
nvmem-cells = <&macaddr_factory_4 2>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
ports {
|
||||
port@1 {
|
||||
status = "okay";
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
status = "okay";
|
||||
label = "lan1";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* pcie0: MT7915 HIF (14c3,7916)
|
||||
* pcie1: MT7915 (14c3,7915)
|
||||
*/
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
|
||||
nvmem-cells = <&eeprom>;
|
||||
nvmem-cell-names = "eeprom";
|
||||
};
|
||||
};
|
||||
|
||||
&state_default {
|
||||
gpio {
|
||||
groups = "i2c", "jtag", "uart2", "uart3";
|
||||
function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&xhci {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -58,6 +58,37 @@ define Build/iodata-mstc-header
|
|||
)
|
||||
endef
|
||||
|
||||
define Build/iodata-mstc-header2
|
||||
$(eval model=$(word 1,$(1)))
|
||||
$(eval model_id=$(word 2,$(1)))
|
||||
|
||||
( \
|
||||
fw_len_crc=$$(gzip -c $@ | tail -c 8 | \
|
||||
od -An -tx8 --endian little); \
|
||||
printf "\x03\x1d\x61\x29\x07$(model)" | \
|
||||
dd bs=21 count=1 conv=sync 2>/dev/null; \
|
||||
printf "0.00.000" | dd bs=16 count=1 conv=sync 2>/dev/null; \
|
||||
printf "$$(echo $(REVISION) | cut -d- -f1 | head -c8)" | \
|
||||
dd bs=9 count=1 conv=sync 2>/dev/null; \
|
||||
printf "$(call toupper,$(LINUX_KARCH)) $(VERSION_DIST) Linux-$(LINUX_VERSION)" | \
|
||||
dd bs=33 count=1 conv=sync 2>/dev/null; \
|
||||
date -d "@$(SOURCE_DATE_EPOCH)" "+%F" | tr -d "\n" | \
|
||||
dd bs=15 count=1 conv=sync 2>/dev/null; \
|
||||
printf "$$(echo $(model_id) | sed 's/../\\x&/g')" | \
|
||||
dd bs=8 count=1 conv=sync 2>/dev/null; \
|
||||
printf "$$(echo $$fw_len_crc | sed 's/../\\x&/g')" | \
|
||||
dd bs=14 count=1 conv=sync 2>/dev/null; \
|
||||
cat $@; \
|
||||
) > $@.new
|
||||
( \
|
||||
header_crc="$$(head -c116 $@.new | gzip -c | tail -c8 | \
|
||||
od -An -tx4 -N4 --endian little)"; \
|
||||
printf "$$(echo $$header_crc | sed 's/../\\x&/g')"; \
|
||||
) | dd of=$@.new bs=4 oflag=seek_bytes seek=110 conv=notrunc
|
||||
|
||||
mv $@.new $@
|
||||
endef
|
||||
|
||||
define Build/znet-header
|
||||
$(eval version=$(word 1,$(1)))
|
||||
( \
|
||||
|
|
@ -1195,6 +1226,27 @@ define Device/iodata_wn-ax2033gr
|
|||
endef
|
||||
TARGET_DEVICES += iodata_wn-ax2033gr
|
||||
|
||||
define Device/iodata_wn-deax1800gr
|
||||
$(Device/dsa-migration)
|
||||
DEVICE_VENDOR := I-O DATA
|
||||
DEVICE_MODEL := WN-DEAX1800GR
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
KERNEL_SIZE := 6144k
|
||||
IMAGE_SIZE := 47104k
|
||||
UBINIZE_OPTS := -E 5
|
||||
KERNEL_LOADADDR := 0x82000000
|
||||
KERNEL := kernel-bin | relocate-kernel 0x80001000 | lzma | \
|
||||
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
ARTIFACTS := initramfs-factory.bin
|
||||
ARTIFACT/initramfs-factory.bin := append-image-stage initramfs-kernel.bin | \
|
||||
check-size | xor-image -p 29944a25120984c2 -x | \
|
||||
iodata-mstc-header2 WN-DEAX1800GR 00021003
|
||||
DEVICE_PACKAGES := kmod-mt7915-firmware
|
||||
endef
|
||||
TARGET_DEVICES += iodata_wn-deax1800gr
|
||||
|
||||
define Device/iodata_wn-dx1167r
|
||||
$(Device/iodata_nand)
|
||||
DEVICE_MODEL := WN-DX1167R
|
||||
|
|
|
|||
|
|
@ -67,6 +67,7 @@ ramips_setup_interfaces()
|
|||
beeline,smartbox-flash|\
|
||||
beeline,smartbox-giga|\
|
||||
glinet,gl-mt1300|\
|
||||
iodata,wn-deax1800gr|\
|
||||
iptime,a3002mesh|\
|
||||
jcg,q20|\
|
||||
lenovo,newifi-d1|\
|
||||
|
|
|
|||
|
|
@ -129,6 +129,10 @@ platform_do_upgrade() {
|
|||
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
iodata,wn-deax1800gr)
|
||||
iodata_mstc_set_flag "bootnum" "working" "0x4" "0,1" "0"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
iodata,wn-dx1200gr)
|
||||
iodata_mstc_set_flag "debugflag" "factory" "0x1fe75" "0,1" "1"
|
||||
iodata_mstc_set_flag "bootnum" "persist" "0x4" "1,2" "1"
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user