ipq807x: add support for ZTE MF269
Hardware specifications:
SoC: Qualcomm IPQ8071A
RAM: 512MB of DDR3
Flash1: Eon EN25S64 8MB
Flash2: MX30UF2G18AC 256MB
Ethernet: 2x 2.5G RJ45 port
Phone: 1x RJ11 port (SPI)
USB: 1x Type-C 2.0 port
WiFi1: QCN5024 2.4GHz
WiFi2: QCN5054 5GHz
Button: Reset, WPS
Flash instructions:
1. Connect the router via serial port (115200 8N1 1.8V)
2. Download the initramfs image, rename it to initramfs.bin,
and host it with the tftp server.
3. Interrupt U-Boot and run these commands:
tftpboot initramfs.bin
bootm
4. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Chukun Pan
parent
daba89bca3
commit
c22aa0be3e
|
|
@ -46,6 +46,7 @@ ALLWIFIBOARDS:= \
|
|||
xiaomi_ax9000 \
|
||||
yyets_le1 \
|
||||
yuncore_ax880 \
|
||||
zte_mf269 \
|
||||
zte_mf289f \
|
||||
zte_mf287 \
|
||||
zte_mf287plus \
|
||||
|
|
@ -155,6 +156,7 @@ $(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
|
|||
$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
|
||||
$(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))
|
||||
$(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880))
|
||||
$(eval $(call generate-ipq-wifi-package,zte_mf269,ZTE MF269))
|
||||
$(eval $(call generate-ipq-wifi-package,zte_mf289f,ZTE MF289F))
|
||||
$(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
|
||||
$(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
|
||||
|
|
|
|||
|
|
@ -0,0 +1,448 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq8074-512m.dtsi"
|
||||
#include "ipq8074-ac-cpu.dtsi"
|
||||
#include "ipq8074-ess.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "ZTE MF269";
|
||||
compatible = "zte,mf269", "qcom,ipq8074";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart5;
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
label-mac-device = &dp6_syn;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-append = " root=/dev/ubiblock0_0";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&button_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "white:power";
|
||||
gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
button_pins: button_pins {
|
||||
mux {
|
||||
pins = "gpio37", "gpio46";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_pins: i2c-pins {
|
||||
pins = "gpio21", "gpio22";
|
||||
function = "blsp4_i2c1";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
mdio_pins: mdio-pins {
|
||||
mdc {
|
||||
pins = "gpio68";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio69";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
usb_pwr_pins: usb_pwr_pins {
|
||||
mux {
|
||||
pins = "gpio29";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_spi1 {
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
cs-select = <0>;
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "0:sbl1";
|
||||
reg = <0x0 0x50000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "0:mibib";
|
||||
reg = <0x50000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "0:bootconfig";
|
||||
reg = <0x60000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "0:bootconfig1";
|
||||
reg = <0x80000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "0:qsee";
|
||||
reg = <0xa0000 0x180000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@220000 {
|
||||
label = "0:qsee_1";
|
||||
reg = <0x220000 0x180000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3a0000 {
|
||||
label = "0:devcfg";
|
||||
reg = <0x3a0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3b0000 {
|
||||
label = "0:devcfg_1";
|
||||
reg = <0x3b0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3c0000 {
|
||||
label = "0:apdp";
|
||||
reg = <0x3c0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3d0000 {
|
||||
label = "0:apdp_1";
|
||||
reg = <0x3d0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3e0000 {
|
||||
label = "0:rpm";
|
||||
reg = <0x3e0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@420000 {
|
||||
label = "0:rpm_1";
|
||||
reg = <0x420000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@460000 {
|
||||
label = "0:cdt";
|
||||
reg = <0x460000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@470000 {
|
||||
label = "0:cdt_1";
|
||||
reg = <0x470000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@480000 {
|
||||
label = "0:appsblenv";
|
||||
reg = <0x480000 0x10000>;
|
||||
};
|
||||
|
||||
partition@490000 {
|
||||
label = "0:appsbl";
|
||||
reg = <0x490000 0xc0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@550000 {
|
||||
label = "0:appsbl_1";
|
||||
reg = <0x550000 0xc0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@610000 {
|
||||
label = "0:art";
|
||||
reg = <0x610000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@650000 {
|
||||
label = "0:ethphyfw";
|
||||
reg = <0x650000 0x80000>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c5 {
|
||||
pinctrl-0 = <&i2c_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
/* No driver exists */
|
||||
aw9106: gpio-expander@5b {
|
||||
reg = <0x5b>;
|
||||
reset-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* Bootloader will find the NAND DT node by the compatible and
|
||||
* then "fixup" it by adding the partitions from the SMEM table
|
||||
* using the legacy bindings thus making it impossible for us
|
||||
* to change the partition table or utilize NVMEM for calibration.
|
||||
* So add a dummy partitions node that bootloader will populate
|
||||
* and set it as disabled so the kernel ignores it instead of
|
||||
* printing warnings due to the broken way bootloader adds the
|
||||
* partitions.
|
||||
*/
|
||||
partitions {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "fota-flag";
|
||||
reg = <0x0000000 0x00a0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "mac";
|
||||
reg = <0x00a0000 0x0080000>;
|
||||
read-only;
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_mac_0: macaddr@0 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x0 0x6>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
partition@120000 {
|
||||
label = "cfg-param";
|
||||
reg = <0x0120000 0x1400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1520000 {
|
||||
label = "log";
|
||||
reg = <0x1520000 0x0600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1b20000 {
|
||||
label = "oops";
|
||||
reg = <0x1b20000 0x00a0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1bc0000 {
|
||||
label = "web";
|
||||
reg = <0x1bc0000 0x0800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@23c0000 {
|
||||
label = "ubi_kernel";
|
||||
reg = <0x23c0000 0x3400000>;
|
||||
};
|
||||
|
||||
partition@57c0000 {
|
||||
label = "0:wififw";
|
||||
reg = <0x57c0000 0x0800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* rootfs partition is the result of squashing
|
||||
* consecutive stock partitions:
|
||||
* - openwrt_data (25 MiB)
|
||||
* - data (30 MiB)
|
||||
* - fota (99 MiB)
|
||||
*/
|
||||
partition@5fc0000 {
|
||||
label = "rootfs";
|
||||
reg = <0x5fc0000 0x9a00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qusb_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssphy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0 {
|
||||
pinctrl-0 = <&usb_pwr_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
qca8081_24: ethernet-phy@24 {
|
||||
compatible = "ethernet-phy-id004d.d101";
|
||||
reg = <24>;
|
||||
reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
qca8081_28: ethernet-phy@28 {
|
||||
compatible = "ethernet-phy-id004d.d101";
|
||||
reg = <28>;
|
||||
reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
switch_lan_bmp = <ESS_PORT5>; /* lan port bitmap */
|
||||
switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
|
||||
switch_mac_mode1 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance1*/
|
||||
switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@5 {
|
||||
port_id = <5>;
|
||||
phy_address = <24>;
|
||||
port_mac_sel = "QGMAC_PORT";
|
||||
};
|
||||
port@6 {
|
||||
port_id = <6>;
|
||||
phy_address = <28>;
|
||||
port_mac_sel = "QGMAC_PORT";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dp5_syn {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8081_24>;
|
||||
label = "lan";
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_mac_0 1>;
|
||||
};
|
||||
|
||||
&dp6_syn {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8081_28>;
|
||||
label = "wan";
|
||||
nvmem-cell-names = "mac-address";
|
||||
nvmem-cells = <&macaddr_mac_0 0>;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
qcom,ath11k-calibration-variant = "ZTE-MF269";
|
||||
qcom,ath11k-fw-memory-mode = <1>;
|
||||
};
|
||||
|
|
@ -271,6 +271,20 @@ define Device/yuncore_ax880
|
|||
endef
|
||||
TARGET_DEVICES += yuncore_ax880
|
||||
|
||||
define Device/zte_mf269
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := ZTE
|
||||
DEVICE_MODEL := MF269
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@ac04
|
||||
SOC := ipq8071
|
||||
KERNEL_SIZE := 53248k
|
||||
DEVICE_PACKAGES := ipq-wifi-zte_mf269
|
||||
endef
|
||||
TARGET_DEVICES += zte_mf269
|
||||
|
||||
define Device/zyxel_nbg7815
|
||||
$(call Device/FitImage)
|
||||
$(call Device/EmmcImage)
|
||||
|
|
|
|||
|
|
@ -23,7 +23,8 @@ ipq807x_setup_interfaces()
|
|||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
||||
;;
|
||||
edgecore,eap102|\
|
||||
yuncore,ax880)
|
||||
yuncore,ax880|\
|
||||
zte,mf269)
|
||||
ucidef_set_interfaces_lan_wan "lan" "wan"
|
||||
;;
|
||||
edimax,cax1800)
|
||||
|
|
|
|||
|
|
@ -24,6 +24,7 @@ case "$FIRMWARE" in
|
|||
xiaomi,ax3600|\
|
||||
xiaomi,ax9000|\
|
||||
yuncore,ax880|\
|
||||
zte,mf269|\
|
||||
zyxel,nbg7815)
|
||||
caldata_extract "0:art" 0x1000 0x20000
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -14,4 +14,8 @@ case "$board" in
|
|||
[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
zte,mf269)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 3 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
esac
|
||||
|
|
|
|||
|
|
@ -110,6 +110,11 @@ platform_do_upgrade() {
|
|||
fw_setenv upgrade_available 1
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
zte,mf269)
|
||||
CI_KERN_UBIPART="ubi_kernel"
|
||||
CI_ROOT_UBIPART="rootfs"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
zyxel,nbg7815)
|
||||
local config_mtdnum="$(find_mtd_index 0:bootconfig)"
|
||||
[ -z "$config_mtdnum" ] && reboot
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user