ramips: mt7621: add support for Cudy X6 v2
Rename existing device to v1 and create common .dtsi
Difference to v1: 16MB Flash
Specifications:
SoC: MediaTek MT7621
RAM: 256 MB
Flash: 16 MB (SPI NOR, XM25QH128C on my device)
WiFi: MediaTek MT7915E
Switch: 1 WAN, 4 LAN (Gigabit)
Buttons: Reset, WPS
LEDs: Two Power LEDs (blue and red; together they form purple)
Power: DC 12V 1A center positive
Serial: 115200 8N1
C440 - (3V3 - GND - RX - TX) - C41 | v1 and v2
(P - G - R - T) | v2 labels them on the board
Installation:
Download and flash the manufacturer's built OpenWrt image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWrt image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings.
Recovery:
Loads only signed manufacture firmware due to bootloader RSA verification
Serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
Connect to any lan ethernet port
Power on the device while holding the reset button
Wait at least 8 seconds before releasing reset button for image to
download
MAC addresses as verified by OEM firmware:
use address source
LAN f4:a4:54:86:75:a2 label
WAN f4:a4:54:86:75:a3 label + 1
2g f4:a4:54:86:75:a2 label
5g f6:a4:54:b6:75:a2 label + LA-Bit set + 4th oktet increased
The label MAC address is found in bdinfo 0xde00.
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
This commit is contained in:
Felix Baumann
David Bauer
parent
cf8d861978
commit
e38de40f8d
58
target/linux/ramips/dts/mt7621_cudy_x6-v1.dts
Normal file
58
target/linux/ramips/dts/mt7621_cudy_x6-v1.dts
Normal file
|
|
@ -0,0 +1,58 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621_cudy_x6.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "cudy,x6-v1", "mediatek,mt7621-soc";
|
||||
model = "CUDY X6 v1";
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x1f80000>;
|
||||
};
|
||||
|
||||
partition@1fd0000 {
|
||||
label = "debug";
|
||||
reg = <0x1fd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fe0000 {
|
||||
label = "backup";
|
||||
reg = <0x1fe0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1ff0000 {
|
||||
label = "bdinfo";
|
||||
reg = <0x1ff0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_bdinfo_de00: macaddr@de00 {
|
||||
reg = <0xde00 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
58
target/linux/ramips/dts/mt7621_cudy_x6-v2.dts
Normal file
58
target/linux/ramips/dts/mt7621_cudy_x6-v2.dts
Normal file
|
|
@ -0,0 +1,58 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "mt7621_cudy_x6.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "cudy,x6-v2", "mediatek,mt7621-soc";
|
||||
model = "CUDY X6 v2";
|
||||
};
|
||||
|
||||
&partitions {
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0xf80000>;
|
||||
};
|
||||
|
||||
partition@fd0000 {
|
||||
label = "debug";
|
||||
reg = <0xfd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@fe0000 {
|
||||
label = "backup";
|
||||
reg = <0xfe0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@ff0000 {
|
||||
label = "bdinfo";
|
||||
reg = <0xff0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_bdinfo_de00: macaddr@de00 {
|
||||
reg = <0xde00 0x6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
|
@ -6,9 +6,6 @@
|
|||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
compatible = "cudy,x6", "mediatek,mt7621-soc";
|
||||
model = "CUDY X6";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_internet_blue;
|
||||
led-failsafe = &led_internet_red;
|
||||
|
|
@ -61,7 +58,7 @@
|
|||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
partitions: partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
@ -84,37 +81,7 @@
|
|||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
compatible = "denx,uimage";
|
||||
label = "firmware";
|
||||
reg = <0x50000 0x1f80000>;
|
||||
};
|
||||
|
||||
partition@1fd0000 {
|
||||
label = "debug";
|
||||
reg = <0x1fd0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fe0000 {
|
||||
label = "backup";
|
||||
reg = <0x1fe0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1ff0000 {
|
||||
label = "bdinfo";
|
||||
reg = <0x1ff0000 0x10000>;
|
||||
read-only;
|
||||
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_bdinfo_de00: macaddr@de00 {
|
||||
reg = <0xde00 0x6>;
|
||||
};
|
||||
};
|
||||
/* additional partitions in DTS */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -124,30 +91,18 @@
|
|||
};
|
||||
|
||||
&pcie1 {
|
||||
wifi@0,0 {
|
||||
wifi:wifi@0,0 {
|
||||
compatible = "mediatek,mt76";
|
||||
reg = <0x0000 0 0 0 0>;
|
||||
mediatek,mtd-eeprom = <&factory 0x0000>;
|
||||
mediatek,disable-radar-background;
|
||||
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
status = "okay";
|
||||
label = "wan";
|
||||
phy-handle = <ðphy4>;
|
||||
|
||||
nvmem-cells = <&macaddr_bdinfo_de00>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
mac-address-increment = <1>;
|
||||
};
|
||||
|
||||
&mdio {
|
||||
|
|
@ -543,16 +543,29 @@ define Device/cudy_wr2100
|
|||
endef
|
||||
TARGET_DEVICES += cudy_wr2100
|
||||
|
||||
define Device/cudy_x6
|
||||
define Device/cudy_x6-v1
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 32256k
|
||||
DEVICE_VENDOR := Cudy
|
||||
DEVICE_MODEL := X6
|
||||
DEVICE_VARIANT := v1
|
||||
UIMAGE_NAME := R13
|
||||
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
|
||||
SUPPORTED_DEVICES += R13
|
||||
SUPPORTED_DEVICES += cudy,x6 R13
|
||||
endef
|
||||
TARGET_DEVICES += cudy_x6
|
||||
TARGET_DEVICES += cudy_x6-v1
|
||||
|
||||
define Device/cudy_x6-v2
|
||||
$(Device/dsa-migration)
|
||||
IMAGE_SIZE := 15872k
|
||||
DEVICE_VENDOR := Cudy
|
||||
DEVICE_MODEL := X6
|
||||
DEVICE_VARIANT := v2
|
||||
UIMAGE_NAME := R30
|
||||
DEVICE_PACKAGES := kmod-mt7915-firmware -uboot-envtools
|
||||
SUPPORTED_DEVICES += cudy,x6 R30
|
||||
endef
|
||||
TARGET_DEVICES += cudy_x6-v2
|
||||
|
||||
define Device/dlink_dap-1620-b1
|
||||
DEVICE_VENDOR := D-Link
|
||||
|
|
|
|||
|
|
@ -27,7 +27,8 @@ case "$board" in
|
|||
hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
|
||||
[ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
cudy,x6)
|
||||
cudy,x6-v1|\
|
||||
cudy,x6-v2)
|
||||
hw_mac_addr="$(mtd_get_mac_binary bdinfo 0xde00)"
|
||||
[ "$PHYNBR" = "1" ] && \
|
||||
macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user