bmips: add support for Netgear DGND3700 v1, DGND3800B
The Netgear DGND3700 v1 and DGND3800B are the same device but with
different factory firmwares. It's an xDSL wifi router with a slim black
shiny casing and 4 PCB internal antennas connected via UFL to a miniPCI
detachable card.
Hardware:
- SoC: Broadcom BCM6368
- CPU: dual core BMIPS4350 V3.1 @400Mhz
- RAM: 128 MB DDR
- NOR Flash: 32 MB parallel (CFE and OS)
- NAND flash: 128 MB (empty)
- Ethernet LAN: 5x 1Gbit
- Wifi 2.4 GHz: Broadcom BCM43222 802.11bgn
- Wifi 5 GHz: Broadcom BCM43222 802.11abgn
- USB: 2x 2.0
- Buttons: 3x, 1 reset
- LEDs: 11x
- UART: yes
Installation via OEM web UI:
1. Open the Netgear administration web interface, by default:
http://192.168.0.1
user: admin
password: password
2. Look for "upgrade firmware" and proceed
3. Wait some minutes until it finishes
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
This commit is contained in:
Daniel González Cabanelas
Álvaro Fernández Rojas
parent
37c3d6105c
commit
ed79519b8d
@ -6,6 +6,15 @@
|
||||
board_config_update
|
||||
|
||||
case "$(board_name)" in
|
||||
netgear,dgnd3700-v1 |\
|
||||
netgear,dgnd3800b)
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "switch.1"
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
|
||||
ucidef_set_led_netdev "wlan0" "WIFI2G" "green:wifi2g" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan1" "WIFI5G" "blue:wifi5g" "phy1-ap0"
|
||||
ucidef_set_led_usbport "usb1" "USB1" "green:usb1" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "usb2" "USB2" "green:usb2" "usb1-port2" "usb2-port2"
|
||||
;;
|
||||
observa,vh4032n)
|
||||
ucidef_set_led_usbport "usb1" "USB1" "blue:hspa" "usb1-port1" "usb2-port1"
|
||||
ucidef_set_led_usbport "usb2" "USB2" "red:hspa" "1-2-port1" "1-2-port2"
|
||||
|
||||
@ -10,6 +10,11 @@ observa,vh4032n)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
|
||||
;;
|
||||
netgear,dgnd3700-v1 |\
|
||||
netgear,dgnd3800b)
|
||||
ucidef_set_bridge_device switch
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
8
target/linux/bmips/dts/bcm6368-netgear-dgnd3700-v1.dts
Normal file
8
target/linux/bmips/dts/bcm6368-netgear-dgnd3700-v1.dts
Normal file
@ -0,0 +1,8 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6368-netgear-dgnd3700.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Netgear DGND3700 v1";
|
||||
compatible = "netgear,dgnd3700-v1", "brcm,bcm6368";
|
||||
};
|
||||
266
target/linux/bmips/dts/bcm6368-netgear-dgnd3700.dtsi
Normal file
266
target/linux/bmips/dts/bcm6368-netgear-dgnd3700.dtsi
Normal file
@ -0,0 +1,266 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6368.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
led-boot = &led_power_green;
|
||||
led-failsafe = &led_power_red;
|
||||
led-running = &led_power_green;
|
||||
led-upgrade = &led_power_green;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
rfkill {
|
||||
label = "rfkill";
|
||||
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RFKILL>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
debounce-interval = <60>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led@2 {
|
||||
label = "green:dsl";
|
||||
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@4 {
|
||||
label = "red:wan";
|
||||
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@5 {
|
||||
label = "green:wan";
|
||||
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@11 {
|
||||
label = "green:wps";
|
||||
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* usb front */
|
||||
led@13 {
|
||||
label = "green:usb2";
|
||||
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* usb back */
|
||||
led@14 {
|
||||
label = "green:usb1";
|
||||
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_red: led@22 {
|
||||
label = "red:power";
|
||||
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
|
||||
panic-indicator;
|
||||
};
|
||||
|
||||
led@23 {
|
||||
label = "green:lan";
|
||||
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led_power_green: led@24 {
|
||||
label = "green:power";
|
||||
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
led@26 {
|
||||
label = "green:wifi2g";
|
||||
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led@27 {
|
||||
label = "blue:wifi5g";
|
||||
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ðernet {
|
||||
status = "okay";
|
||||
|
||||
nvmem-cells = <&macaddr_cfe_6a0>;
|
||||
nvmem-cell-names = "mac-address";
|
||||
};
|
||||
|
||||
&lsspi {
|
||||
status = "okay";
|
||||
|
||||
switch@1 {
|
||||
compatible = "brcm,bcm53115";
|
||||
reg = <1>;
|
||||
spi-max-frequency = <781000>;
|
||||
dsa,member = <1 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
wan@0 {
|
||||
reg = <0>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@8 {
|
||||
reg = <8>;
|
||||
|
||||
phy-mode = "rgmii";
|
||||
ethernet = <&switch0port5>;
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nflash {
|
||||
status = "okay";
|
||||
|
||||
nandcs@0 {
|
||||
compatible = "brcm,nandcs";
|
||||
reg = <0>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-ecc-strength = <15>;
|
||||
nand-on-flash-bbt;
|
||||
brcm,nand-oob-sector-size = <64>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "storage";
|
||||
reg = <0 0>; /* autodetected size */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pflash {
|
||||
status = "okay";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cfe: partition@0 {
|
||||
label = "CFE";
|
||||
reg = <0x0000000 0x0020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@20000 {
|
||||
compatible = "brcm,bcm963xx-imagetag";
|
||||
label = "firmware";
|
||||
reg = <0x0020000 0x1e20000>;
|
||||
};
|
||||
|
||||
partition@1e40000 {
|
||||
label = "board_data";
|
||||
reg = <0x1e40000 0x1a0000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1fe0000 {
|
||||
label = "nvram";
|
||||
reg = <0x1fe0000 0x020000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&switch0 {
|
||||
dsa,member = <0 0>;
|
||||
|
||||
ports {
|
||||
switch0port5: port@5 {
|
||||
reg = <5>;
|
||||
label = "extsw";
|
||||
|
||||
phy-mode = "rgmii";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbh {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cfe {
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
macaddr_cfe_6a0: macaddr@6a0 {
|
||||
reg = <0x6a0 0x6>;
|
||||
};
|
||||
};
|
||||
8
target/linux/bmips/dts/bcm6368-netgear-dgnd3800b.dts
Normal file
8
target/linux/bmips/dts/bcm6368-netgear-dgnd3800b.dts
Normal file
@ -0,0 +1,8 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later
|
||||
|
||||
#include "bcm6368-netgear-dgnd3700.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Netgear DGND3800B";
|
||||
compatible = "netgear,dgnd3800b", "brcm,bcm6368";
|
||||
};
|
||||
@ -313,6 +313,15 @@ define Device/bcm63xx-nand
|
||||
DEVICE_PACKAGES += nand-utils
|
||||
endef
|
||||
|
||||
define Device/bcm63xx_netgear
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
IMAGES := factory.chk sysupgrade.bin
|
||||
IMAGE/factory.chk := cfe-bin | netgear-chk
|
||||
NETGEAR_BOARD_ID :=
|
||||
NETGEAR_REGION :=
|
||||
endef
|
||||
|
||||
define Device/sercomm-nand
|
||||
$(Device/bcm63xx-nand)
|
||||
IMAGES := factory.img sysupgrade.bin
|
||||
|
||||
@ -14,6 +14,35 @@ define Device/comtrend_vr-3025u
|
||||
endef
|
||||
TARGET_DEVICES += comtrend_vr-3025u
|
||||
|
||||
define Device/netgear_dgnd3700-v1
|
||||
$(Device/bcm63xx_netgear)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := DGND3700
|
||||
DEVICE_VARIANT := v1
|
||||
CFE_BOARD_ID := 96368MVWG
|
||||
CHIP_ID := 6368
|
||||
BLOCKSIZE := 0x20000
|
||||
NETGEAR_BOARD_ID := U12L144T01_NETGEAR_NEWLED
|
||||
NETGEAR_REGION := 1
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
$(B43_PACKAGES)
|
||||
endef
|
||||
TARGET_DEVICES += netgear_dgnd3700-v1
|
||||
|
||||
define Device/netgear_dgnd3800b
|
||||
$(Device/bcm63xx_netgear)
|
||||
DEVICE_VENDOR := NETGEAR
|
||||
DEVICE_MODEL := DGND3800B
|
||||
CFE_BOARD_ID := 96368MVWG
|
||||
CHIP_ID := 6368
|
||||
BLOCKSIZE := 0x20000
|
||||
NETGEAR_BOARD_ID := U12L144T11_NETGEAR_NEWLED
|
||||
NETGEAR_REGION := 1
|
||||
DEVICE_PACKAGES += $(USB2_PACKAGES) \
|
||||
$(B43_PACKAGES)
|
||||
endef
|
||||
TARGET_DEVICES += netgear_dgnd3800b
|
||||
|
||||
define Device/observa_vh4032n
|
||||
$(Device/bcm63xx-cfe)
|
||||
DEVICE_VENDOR := Observa
|
||||
|
||||
Loading…
Reference in New Issue
Block a user