ipq807x: add Arcadyan AW1000 support
Hardware specification:
SoC: Qualcomm IPQ8072A
Flash: Toshiba NAND 1GiB
RAM: 1 GiB of DDR3 466 MHz
Ethernet: 4x 1Gbps + 1x 2.5Gbps
WiFi1: QCN5024 2.4GHz ax 4x4
WiFi2: QCN5054 5GHz ax 4x4
Button: WiFi, WPS, Reset
Modem: RG500Q-EA
USB: 1 x USB 3.0
Power: DC 12V 4A
Flash instructions:
1. Download the initramfs image, rename it to
initramfs.bin, and host it with tftp server.
2. Interrupt U-Boot and run these commands:
tftpboot initramfs.bin
bootm
3. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
This commit is contained in:
Chukun Pan
Christian Marangi
parent
ab6a029573
commit
fbcda3616e
|
|
@ -28,6 +28,7 @@ endef
|
|||
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
|
||||
|
||||
ALLWIFIBOARDS:= \
|
||||
arcadyan_aw1000 \
|
||||
buffalo_wxr-5950ax12 \
|
||||
compex_wpq873 \
|
||||
dynalink_dl-wrx36 \
|
||||
|
|
@ -136,6 +137,7 @@ endef
|
|||
# Board files should follow this name structure:
|
||||
# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
|
||||
|
||||
$(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
|
||||
$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
|
||||
$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
|
||||
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
|
||||
|
|
|
|||
|
|
@ -0,0 +1,345 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/* Copyright (c) 2023, Chukun Pan <amadeus@jmu.edu.cn> */
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq8074.dtsi"
|
||||
#include "ipq8074-hk-cpu.dtsi"
|
||||
#include "ipq8074-ess.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Arcadyan AW1000";
|
||||
compatible = "arcadyan,aw1000", "qcom,ipq8074";
|
||||
|
||||
aliases {
|
||||
led-boot = &led_power;
|
||||
led-failsafe = &led_power;
|
||||
led-running = &led_power;
|
||||
led-upgrade = &led_power;
|
||||
serial0 = &blsp1_uart5;
|
||||
/*
|
||||
* Aliases as required by u-boot
|
||||
* to patch MAC addresses
|
||||
*/
|
||||
ethernet0 = &dp1;
|
||||
ethernet1 = &dp2;
|
||||
ethernet2 = &dp3;
|
||||
ethernet3 = &dp4;
|
||||
ethernet4 = &dp6_syn;
|
||||
label-mac-device = &dp1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-append = " root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
gpio-export {
|
||||
compatible = "gpio-export";
|
||||
|
||||
lte-pwrkey {
|
||||
gpio-export,name = "lte_pwrkey";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lte-power {
|
||||
gpio-export,name = "lte_power";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
lte-reset {
|
||||
gpio-export,name = "lte_reset";
|
||||
gpio-export,output = <1>;
|
||||
gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
usb-vbus {
|
||||
gpio-export,name = "usb_vbus";
|
||||
gpio-export,output = <0>;
|
||||
gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
wlan {
|
||||
label = "wlan";
|
||||
linux,code = <KEY_WLAN>;
|
||||
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wps {
|
||||
label = "wps";
|
||||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
led-spi {
|
||||
compatible = "spi-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
|
||||
mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
led_gpio: led-gpio@0 {
|
||||
compatible = "fairchild,74hc595";
|
||||
reg = <0>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
registers-number = <2>;
|
||||
spi-max-frequency = <1000000>;
|
||||
enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led_power: power {
|
||||
label = "green:power";
|
||||
gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "green:wifi";
|
||||
gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
internet {
|
||||
label = "green:internet";
|
||||
gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
5g-red {
|
||||
label = "red:5g";
|
||||
gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
5g-green {
|
||||
label = "green:5g";
|
||||
gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
5g-blue {
|
||||
label = "blue:5g";
|
||||
gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal-red {
|
||||
label = "red:signal";
|
||||
gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal-green {
|
||||
label = "green:signal";
|
||||
gpios = <&led_gpio 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
signal-blue {
|
||||
label = "blue:signal";
|
||||
gpios = <&led_gpio 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
phone {
|
||||
label = "green:phone";
|
||||
gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
mdio_pins: mdio-pins {
|
||||
mdc {
|
||||
pins = "gpio68";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio69";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
partitions {
|
||||
compatible = "qcom,smem-part";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qusb_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qusb_phy_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssphy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssphy_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
||||
|
||||
qca8075_0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
qca8075_1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
qca8075_2: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
qca8075_3: ethernet-phy@3 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <3>;
|
||||
};
|
||||
|
||||
qca8081: ethernet-phy@28 {
|
||||
compatible = "ethernet-phy-id004d.d101";
|
||||
reg = <28>;
|
||||
reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
|
||||
switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
|
||||
switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
|
||||
switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@1 {
|
||||
port_id = <1>;
|
||||
phy_address = <0>;
|
||||
};
|
||||
port@2 {
|
||||
port_id = <2>;
|
||||
phy_address = <1>;
|
||||
};
|
||||
port@3 {
|
||||
port_id = <3>;
|
||||
phy_address = <2>;
|
||||
};
|
||||
port@4 {
|
||||
port_id = <4>;
|
||||
phy_address = <3>;
|
||||
};
|
||||
port@6 {
|
||||
port_id = <6>;
|
||||
phy_address = <28>;
|
||||
port_mac_sel = "QGMAC_PORT";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dp1 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_0>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
&dp2 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_1>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
&dp3 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_2>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
&dp4 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_3>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
&dp6_syn {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8081>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
|
||||
qcom,ath11k-calibration-variant = "Arcadyan-AW1000";
|
||||
};
|
||||
|
|
@ -33,6 +33,20 @@ define Build/wax6xx-netgear-tar
|
|||
rm -rf $@.tmp
|
||||
endef
|
||||
|
||||
define Device/arcadyan_aw1000
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Arcadyan
|
||||
DEVICE_MODEL := AW1000
|
||||
BLOCKSIZE := 256k
|
||||
PAGESIZE := 4096
|
||||
DEVICE_DTS_CONFIG := config@hk09
|
||||
SOC := ipq8072
|
||||
DEVICE_PACKAGES := ipq-wifi-arcadyan_aw1000 kmod-spi-gpio \
|
||||
kmod-gpio-nxp-74hc164 kmod-usb-serial-option uqmi
|
||||
endef
|
||||
TARGET_DEVICES += arcadyan_aw1000
|
||||
|
||||
define Device/buffalo_wxr-5950ax12
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := Buffalo
|
||||
|
|
|
|||
|
|
@ -6,6 +6,10 @@ board_config_update
|
|||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,aw1000)
|
||||
ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
|
||||
;;
|
||||
edgecore,eap102)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@ ipq807x_setup_interfaces()
|
|||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
arcadyan,aw1000|\
|
||||
buffalo,wxr-5950ax12|\
|
||||
dynalink,dl-wrx36|\
|
||||
xiaomi,ax9000)
|
||||
|
|
|
|||
|
|
@ -9,6 +9,7 @@ board=$(board_name)
|
|||
case "$FIRMWARE" in
|
||||
"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
|
||||
case "$board" in
|
||||
arcadyan,aw1000|\
|
||||
buffalo,wxr-5950ax12|\
|
||||
compex,wpq873|\
|
||||
dynalink,dl-wrx36|\
|
||||
|
|
|
|||
|
|
@ -0,0 +1,17 @@
|
|||
[ "$ACTION" == "add" ] || exit 0
|
||||
|
||||
PHYNBR=${DEVPATH##*/phy}
|
||||
|
||||
[ -n $PHYNBR ] || exit 0
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
arcadyan,aw1000)
|
||||
[ "$PHYNBR" = "0" ] && macaddr_add $(get_mac_label) 1 > /sys${DEVPATH}/macaddress
|
||||
[ "$PHYNBR" = "1" ] && macaddr_add $(get_mac_label) 2 > /sys${DEVPATH}/macaddress
|
||||
;;
|
||||
esac
|
||||
|
|
@ -43,14 +43,7 @@ platform_pre_upgrade() {
|
|||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
buffalo,wxr-5950ax12)
|
||||
CI_KERN_UBIPART="rootfs"
|
||||
CI_ROOT_UBIPART="user_property"
|
||||
buffalo_upgrade_prepare
|
||||
nand_do_flash_file "$1" || nand_do_upgrade_failed
|
||||
nand_do_restore_config || nand_do_upgrade_failed
|
||||
buffalo_upgrade_optvol
|
||||
;;
|
||||
arcadyan,aw1000|\
|
||||
compex,wpq873|\
|
||||
dynalink,dl-wrx36|\
|
||||
edimax,cax1800|\
|
||||
|
|
@ -60,6 +53,14 @@ platform_do_upgrade() {
|
|||
netgear,wax630)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
buffalo,wxr-5950ax12)
|
||||
CI_KERN_UBIPART="rootfs"
|
||||
CI_ROOT_UBIPART="user_property"
|
||||
buffalo_upgrade_prepare
|
||||
nand_do_flash_file "$1" || nand_do_upgrade_failed
|
||||
nand_do_restore_config || nand_do_upgrade_failed
|
||||
buffalo_upgrade_optvol
|
||||
;;
|
||||
edgecore,eap102)
|
||||
active="$(fw_printenv -n active)"
|
||||
if [ "$active" -eq "1" ]; then
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user