Commit Graph

60265 Commits

Author SHA1 Message Date
Florian Eckert
27d227b682 imagebuilder: check if BOARD is located in the feeds sub directory
Fixes the regression so that targets that were installed via a feed can
also be build again with the Image Builder.

Fixes: 84ec8c4 ("imagebuilder: copy from buildroot only target/linux")
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Tested-by: Thomas Richard <thomas.richard@bootlin.com>
2024-03-29 20:00:27 +01:00
Tianling Shen
163c3d0bde rockchip: remove redundant 'console' parameter from boot script
ttyS2 is the default console used for all rockchip boards.
The redundant 'console=tty1' parameter now breaks the console due to
recent procd update.

Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-03-29 19:34:42 +01:00
Tianling Shen
50e6c8ae8d rockchip: remove 'swiotlb' parameter from boot script
We have hardware IOMMU support and this is totally unnecessary.
The given value is also unreasonable, it's too small and causes
kernel panic in some cases:

[ 5706.856473] sdhci-dwcmshc fe310000.mmc: swiotlb buffer is full (sz: 28672 bytes), total 512 (slots), used 498 (slots)
[ 5706.864451] sdhci-dwcmshc fe310000.mmc: swiotlb buffer is full (sz: 65536 bytes), total 512 (slots), used 464 (slots)

This parameter seems to be added by mistake, so remove it.

Fixes: e35c7ab51f ("rockchip: merge bootscript")
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
2024-03-29 19:34:42 +01:00
Robert Marko
5876b4afb9 qualcommax: default to kernel 6.6
6.6 has been in testing on qualcommax for a while so it should be in a
good shape, but lets default to it to get a wider audience.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-29 18:56:31 +01:00
Petr Štetiar
d4b6b76443
Revert "tools/xz: update to 5.6.1" (CVE-2024-3094)
This reverts commit 714c91d1a6 as probably
the upstream xz repository and the xz tarballs have been backdoored.

References: https://www.openwall.com/lists/oss-security/2024/03/29/4.
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2024-03-29 16:59:56 +00:00
Jordan Woyak
f9f2426e39 config: Enable ext4 journaling by default.
Not having a journal by default is a major "gotcha".

Because openwrt does not fsck on boot, a power loss without journaling
can result in a dirty filesystem that openwrt will mount as read-only
which requires intervention to restore the router to working order.

Signed-off-by: Jordan Woyak <jordan.woyak@gmail.com>
2024-03-29 17:49:53 +01:00
Tomasz Maciej Nowak
d506ea3e80 kernel: kmod-phy-smsc: add dependency on crc16
Introduced WoL feature needs CRC16 support.

Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
2024-03-29 17:32:26 +01:00
Felix Fietkau
87de62dcb8 perf: fix build on linux 6.6
- use Makefile.perf to prevent overriding MAKEFLAGS
- fix path to PKG_CONFIG
- link libstdc++ statically (only used for demangling)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-03-29 15:41:16 +01:00
Felix Fietkau
383b68e73c tools/cmake: disable xcode generator
Fixes build on latest macOS SDK

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-03-29 15:40:25 +01:00
Felix Fietkau
c9ae8fd3d4 tools/e2fsprogs: disable building fuse2fs to avoid depending on libfuse
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2024-03-29 15:39:04 +01:00
Hauke Mehrtens
2ec025d554 kernel: bump 5.15 to 5.15.152
Removed because it is upstream:
generic/backport-5.15/081-v5.17-regmap-allow-to-define-reg_update_bits-for-no-bus.patch
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.15.y&id=fbddd48f1456db32b675fad95a902de38345902a

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-29 13:44:41 +01:00
Hauke Mehrtens
0307571124 kernel: bump 5.15 to 5.15.151
No manual changes needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2024-03-29 13:44:41 +01:00
Florian Eckert
535d487c41 linux-firmware: add missing LICENSE_FILES info
Where it is clear which lincense the firmware package has, the missing
information are added.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-03-29 13:11:47 +01:00
Florian Eckert
5c14de1d7e linux-firmware: add LICENSE_FILES and LICENSE file handling
The firmware blobs have all different licenses from the different
manufacturers of the binary blobs. This information is contained in the
upstream 'linux-firmware' repositroy.

This commit extends the package handling so that this information can be
added as an additional argument during packages generation.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
2024-03-29 13:11:47 +01:00
Robert Marko
b1d579f174 archs38: remove 5.15 support
Since 6.1 is now default, drop 5.15 support.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-29 09:58:45 +01:00
Robert Marko
00c26f4728 archs38: default to kernel 6.1
Default to kernel 6.1 on archs38.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-29 09:58:45 +01:00
Mieczyslaw Nalewaj
de8a6ce5ea generic: 6.6: add kernel missing symbol
Add missing symbol CONFIG_SSIF_IPMI_BMC causing bcm53xx compilation errors.

Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
2024-03-29 09:58:18 +01:00
Nick Hainke
b05aad58e8 tools/cmake: update to 3.29.0
Changelog:
- https://www.kitware.com/cmake-3-29-0-available-for-download/

Refresh patches:
- 120-curl-fix-libressl-linking.patch
- 130-bootstrap_parallel_make_flag.patch
- 150-zstd-libarchive.patch

Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-03-29 07:18:07 +01:00
Nick Hainke
714c91d1a6 tools/xz: update to 5.6.1
Change mirror to github.

Signed-off-by: Nick Hainke <vincent@systemli.org>
2024-03-29 06:56:43 +01:00
Rafał Miłecki
eb370ebc5f bcm47xx: refresh kernel 6.1 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-29 00:12:50 +01:00
Rafał Miłecki
8583a97c06 bcm47xx: add testing support for kernel 6.1
Tested on Luxul XWR-1750 (BCM4706). Working: switch (LAN, WAN), LEDs,
sysupgrade.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-29 00:11:04 +01:00
Rafał Miłecki
d4a40827ba bcm4908: refresh kernel 6.6 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 13:29:52 +01:00
Rafał Miłecki
c3dc52fb3c bcm4008: prepare to work on kernel 6.6
Don't add KERNEL_TESTING_PATCHVER yet as there are some issues with it.

On TP-Link Archer C2300 serial console seems to stop working after
preinit:
> Press the [f] key and hit [enter] to enter failsafe mode
> Press the [1], [2], [3] or [4] key and hit [enter] to select the de�

On Netgear R8000P XHCI causes external abort:
[    2.139586] Internal error: synchronous external abort: 0000000096000210 [#1] SMP
[    2.147212] Modules linked in: xhci_plat_hcd(+) xhci_hcd ohci_platform ohci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug(O) usbcore nls_base usb_common crc32c_generic
[    2.164774] CPU: 0 PID: 358 Comm: kmodloader Tainted: G           O       6.6.22 #0
[    2.172658] Hardware name: Netgear R8000P (DT)
[    2.177229] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.184395] pc : xhci_gen_setup+0x80/0x34c [xhci_hcd]
[    2.189591] lr : xhci_gen_setup+0x74/0x34c [xhci_hcd]
[    2.194788] sp : ffffffc0815d37b0
[    2.198194] x29: ffffffc0815d37b0 x28: ffffff8002000000 x27: ffffff8001172d88
[    2.205540] x26: ffffff8002000000 x25: 0000000000000000 x24: ffffffc078b603c0
[    2.212888] x23: ffffffc078b2a008 x22: ffffff8001172c10 x21: ffffff8002000000
[    2.220235] x20: ffffff8002000000 x19: ffffff8002000250 x18: 0000000000000000
[    2.227582] x17: 626d756e20737562 x16: 2064656e67697373 x15: ffffffffffffffff
[    2.234929] x14: ffffff80019e9915 x13: ffffff80019e9913 x12: 00000000ffffffea
[    2.242276] x11: 00000000ffffefff x10: 0000000000000062 x9 : 00000000ffffffd0
[    2.246760] bcm63138_nand ff801800.nand-controller: timeout waiting for command 0x4
[    2.249623] x8 : 0000000000000073 x7 : ffffffc0815d37c0 x6 : 0000000000000075
[    2.257513] bcm63138_nand ff801800.nand-controller: intfc status c00000e0
[    2.264855] x5 : 0000000000000081 x4 : 0000000000000000 x3 : ffffff8001b61800
[    2.279193] x2 : ffffffc080b5d000 x1 : ffffff80020003a8 x0 : ffffff8002000398
[    2.286540] Call trace:
[    2.289048]  xhci_gen_setup+0x80/0x34c [xhci_hcd]

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 13:29:52 +01:00
Rafał Miłecki
4aff8d0d52 bcm4908: switch to the kernel 6.1
Tested on Netgear R8000P and TP-Link Archer C2300.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 13:29:52 +01:00
Rafał Miłecki
359be94f5e bcm4908: use DT to mark NAND controller WP pin as not connected
Use cleaner and more upstream-fit solution.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 13:29:52 +01:00
Robert Marko
fd58b1a8bc airoha: remove 5.15 support
Now that 6.1 is default, remove 5.15 support.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-28 13:06:43 +01:00
Robert Marko
cbc2664d1d airoha: default to kernel 6.1
6.1 has been present as testing for a while now, so default to it.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-28 13:06:43 +01:00
Rafał Miłecki
6ddc9fc4b5 kernel: backport brcmnand support for "brcm,wp-not-connected"
It's required to support NAND controllers with WP pin on boards that
don't have it connected to NAND chip.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 08:52:23 +01:00
Rafał Miłecki
2feedab805 bcm53xx: refresh kernel 6.6 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 00:11:37 +01:00
Rafał Miłecki
f0d8ce4f48 bcm53xx: add testing support for kernel 6.6
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 00:06:26 +01:00
Rafał Miłecki
67b8ddbe34 bcm53xx: switch to the kernel 6.1
Successfully verified on Luxul XWR-3150 (BCM47094). Tested LAN, WAN,
Wi-Fi, USB, sysupgrade.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 00:05:50 +01:00
Rafał Miłecki
2481aa4a46 bcm53xx: refresh kernel 6.1 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 00:05:50 +01:00
Rafał Miłecki
dd78a59cd7 kernel: fix NVMEM looking for OTP NVMEM cells in wrong DT node
It was breaking NAND controllers drivers.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2024-03-28 00:05:50 +01:00
Chukun Pan
29515862ac sunxi: backport h616 thermal sensor support
Backport H616 thermal sensor support from linux-next.
Tested on the Orange Pi Zero 3 (H618 SoC).

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2024-03-26 21:56:57 +01:00
Chukun Pan
29b8ba75fa sunxi: add support for Orange Pi Zero 3
Key features:
  Allwinner H618 SoC (Quad core Cortex-A53)
  1/1.5/2/4 GiB LPDDR4 DRAM
  1 USB 2.0 type C port (Power + OTG)
  1 USB 2.0 host port
  1Gbps Ethernet port
  Micro-HDMI port
  MicroSD slot

Installation:
  Write the image to SD Card with dd.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2024-03-26 21:56:57 +01:00
Chukun Pan
85b156c113 generic: 6.1: backport AXP PMIC support
Backport AXP15060, AXP313a and AXP192 support.
The AXP15060 PMIC is used for starfive boards,
and the AXP313a PMIC is used for sunxi boards.
Remove conflicting patches from starfive target.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2024-03-26 21:56:57 +01:00
Chukun Pan
9a19ec79f9 uboot-sunxi: bump to 2024.01
This version supports LPDDR4 DRAM of H618 SoC.

Runtime-tested:
  Olimex Olinuxino Micro (A20)
  Orange Pi Zero 3 (H618)
  Pine64 SoPine (A64)

Tested-by: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
2024-03-26 21:56:57 +01:00
Robert Marko
1d33ee019f kernel: qca-ssdk: fix C45 MDIO support on kernel 6.6
Kernel 6.3 has introduced separate C45 read/write operations, and thus
split them out of the C22 operations completely so the old way of marking
C45 reads and writes via the register value does not work anymore.

This is causing SSDK to fail and find C45 only PHY-s such as Aquantia ones:
[   22.187877] ssdk_phy_driver_init[371]:INFO:dev_id = 0, phy_adress = 8, phy_id = 0x0 phytype doesn't match
[   22.209924] ssdk_phy_driver_init[371]:INFO:dev_id = 0, phy_adress = 0, phy_id = 0x0 phytype doesn't match

This in turn causes USXGMII MAC autoneg bit to not get set and then UNIPHY
autoneg will time out, causing the 10G ports not to work:
[   37.292784] uniphy autoneg time out!

So, lets detect C45 reads and writes by the magic BIT(30) in the register
argument and if so call separate C45 mdiobus read/write functions.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-26 18:10:50 +01:00
Josef Schlehofer
80b2288ea3 tools/expat: update to version 2.6.2
Release notes:
https://github.com/libexpat/libexpat/blob/R_2_6_2/expat/Changes

Fixes:
CVE-2024-28757

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
2024-03-26 10:37:37 +01:00
Daniel Golle
79e9ce354e generic: phy-mediatek-xfi-tphy: fix SGMII issue
Fix issue of transmitting abnormal data which leads to link problems
in 1G and 2.5G SerDes modes (SGMII, 1000Base-X, 2500Base-X) on the
MediaTek MT7988 SoC.

Link: b72d6cba92
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-03-25 22:00:37 +00:00
Goetz Goerisch
71ccb35017 realtek: add Zyxel GS1900-8 v2
The Zyxel GS1900-8 v2 or Rev.B1 is a newer variant of the GS1900-8, but
otherwise similar to the other GS1900 switches.

Differences
------------
* Front Button labeled RESTORE
* NO Power Switch on rear
* Serial Header next to the barrel power connector
* Part Number ends 0102F

Signed-off-by: Goetz Goerisch <ggoerisch@gmail.com>
2024-03-25 21:28:44 +01:00
Allen Zhao
640b0b79ff mediatek: filogic: add Unielec U7981-01 support
Hardware specification:
  SoC: MediaTek MT7981B 2x A53
  Flash: 8GB eMMC or 128 MB SPI-NAND
  RAM: 256MB
  Ethernet: 5x 10/100/1000 Mbps
  Switch: MediaTek MT7531AE
  WiFi: MediaTek MT7976C
  Button: Reset
  USB: M.2(B-key) for 4G/5G Module
  Power: DC 12V 1A
  UART: 3.3v, 115200n8
  --------------------------
  |         Layout         |
  |   -----------------    |
  | 4 | VCC RX TX GND | <= |
  |   -----------------    |
  --------------------------

The U-boot menu will automatically appear at startup, and then select
the required options through UP/DOWN Key.

NAND Flash and eMMC Flash instructions:
1. Set your computers IP adress to 192.168.1.2.
2. Run a TFTP server providing the sysupgrade.bin image.
3. Power on the router, into the U-Boot menu.
4. Select "2. Upgrade firmware"
5. Update sysupgrade.bin file name, input server IP and input device
   IP (if they deviate from the defaults)
6. Wait for automatic startup after burning

Signed-off-by: Allen Zhao <allenzhao@unielecinc.com>
2024-03-25 18:14:19 +00:00
Robert Marko
ff064b68d4 procd: update to Git HEAD (2024-03-25)
79f8cfa58ee7 ci: add github test workflow
428f40e7984f test commit fixing warnings
63058d1f81a5 ci: enable ujail builds
49ea930a862c utils: add key-value offset support to get_cmdline_val()
ca8c30208d5e inittab: fallback when multiple "console=" is detected

Required for the recent Elecom multiple console commits.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-25 11:50:19 +01:00
Robert Marko
bf4c04a4d0 hostapd: fix Argument list too long build error
Currently, both CI and local builds of wpa-supplicant will fail with:
/bin/sh: Argument list too long

Its happening as the argument list for mkdir in build.rules is too large
and over the MAX_ARG_STRLEN limit.

It seems that recent introduction of APK compatible version schema has
increased the argument size and thus pushed it over the limit uncovering
the issue.

Fixes: e8725a932e ("treewide: use APK compatible version schema")
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-03-25 11:02:16 +01:00
Paul Spooren
c02a2db05e treewide: update PKG_MIRROR_HASH after APK version schema
With the change in version schema the downloaded files changed, too,
mostly the hash is now prefixed with a tilde `~` instead of a dash `-`.

Since each downloaded archive contains folder with the same name as the
archive, the checksum changed.

Signed-off-by: Paul Spooren <mail@aparcar.org>
2024-03-25 09:32:48 +01:00
Pawel Dembicki
004eac14ab mpc85xx: add 6.6 testing kernel
This commit adds 6.6 kernel as testing verion.

Run tested:
p2020/p2020-rdb
p1010/TL-WDR4900-V1
p1010/BR200-WP

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-24 21:20:46 +01:00
Pawel Dembicki
7a43f185c9 mpc85xx: kernel: 6.6: refresh config
config-6.6 refreshed by 'make kernel_oldconfig'
p2020 config-default refreshed manually

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-24 21:20:46 +01:00
Pawel Dembicki
affdd9eee8 mpc85xx: kernel: 6.6: refresh patches
Manualy refreshed:
101-powerpc-85xx-hiveap-330-support.patch
105-powerpc-85xx-panda-support.patch

Rest done by 'make target/linux/refresh'

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-24 21:20:46 +01:00
Pawel Dembicki
3146fdfd71 kernel/mpc85xx: Restore kernel files for v6.1
This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.

See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-24 21:20:46 +01:00
Pawel Dembicki
25abc8f4ad kernel/mpc85xx: Create kernel files for v6.6 (from v6.1)
This is an automatically generated commit.

During a `git bisect` session, `git bisect --skip` is recommended.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2024-03-24 21:20:46 +01:00