ImmortalWrt

添加了AIO-3399B的支持

Go to file

Florian Fainelli 3eedb2a791 add the insight gdb frontend (#4701 ) SVN-Revision: 17019		2009-07-26 17:55:50 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857 )	2009-07-25 21:45:51 +00:00
package	lua: introduce soft memory limits that trigger a gc run but do not result in an oom error	2009-07-26 15:06:43 +00:00
scripts	Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason.	2009-06-08 21:17:58 +00:00
target	upgrade ppc40x to 2.6.30, unify magicbox and openrb board cuimages	2009-07-26 16:21:43 +00:00
toolchain	add the insight gdb frontend (#4701 )	2009-07-26 17:55:50 +00:00
tools	firmware-utils: add new tool for the wrt400n (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>)	2009-07-12 08:59:18 +00:00
.gitignore	add logs/ to .gitignore	2009-04-24 01:04:57 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857 )	2009-07-25 21:45:51 +00:00
feeds.conf.default	switch to LuCI 0.9.x branch	2009-06-10 23:55:19 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh	2009-05-28 18:40:37 +00:00
README	change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh	2008-12-31 14:52:23 +00:00
rules.mk	globally define IPv6 support or not in OpenWrt, just like for largefiles, ipv6 disabled by default (#4857 )	2009-07-25 21:45:51 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org