ImmortalWrt/package/firmware
Mohammad Sayful Islam 46a2490e8f ipq807x: add support for Linksys MX4200 V1 and V2
Linksys MX4200 is a 802.11ax Tri-band router/AP.
Specifications:
* CPU: Qualcomm IPQ8174 Quad core Cortex-A53 1.4GHz
* RAM: 512MB of DDR3
* Storage: 512Mb NAND
* Ethernet: 4x1G RJ45 ports (QCA8075)
* WLAN:
	* 2.4GHz: Qualcomm QCN5024 2x2 802.11b/g/n/ax 574 Mbps PHY rate
	* 5GHz: Qualcomm QCN5054 2x2@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate
	* 5GHz: Qualcomm QCN5054 4x4@80MHz or 2x2@160MHz 802.11a/b/g/n/ac/ax 2402 PHY rate
* LED-s:
	* RGB system led

* Buttons: 1x Soft reset 1x WPS
* Power: 12V DC Jack

Installation instructions:
Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup.
Login with your admin password. The default password can be found on a sticker under the device.
To enter into the support mode, click on the “CA” link and the bottom of the page.
Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button.
Click start. Ignore all the prompts and warnings by click “yes” in all the popups.
The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device.
Then you would need to write openwrt to the other partition for it to work
- First Check booted partition
fw_printenv -n boot_part

- Then install Openwrt to the other partition if booted in slot 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin alt_kernel

- If in slot 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq807x-linksys_mx4200v(X)-squashfs-factory.bin kernel

Replace (X) with your model version either 1 or 2

Signed-off-by: Mohammad Sayful Islam <sayf.mohammad01@gmail.com>
Reviewed-by: Robert Marko <robimarko@gmail.com>
2024-01-06 16:13:23 +01:00
..
ath10k-ct-firmware ath10k-ct-firmware: set DL_DIR to package specific subdirectory 2022-09-22 16:48:36 -04:00
ath11k-firmware ath11k-firmware: update to stable WLAN.HK.2.9.0.1-01890 2023-09-12 23:39:04 +02:00
broadcom-sprom broadcom-sprom: update to latest version 2023-04-27 17:46:12 +02:00
cypress-firmware cypress-firmware: update to v5.10.9-2022_0909 2022-11-17 16:43:55 +01:00
cypress-nvram cypress-nvram: consolidate NVRAM packages 2022-11-16 20:14:13 +01:00
intel-microcode packages: assign PKG_CPE_ID for all missing packages 2023-09-19 20:21:13 +02:00
ipq-wifi ipq807x: add support for Linksys MX4200 V1 and V2 2024-01-06 16:13:23 +01:00
ixp4xx-microcode firmware: Resurrect the ixp4xx microcode package 2023-10-25 11:28:15 +02:00
lantiq/dsl-vrx200-firmware-xdsl treewide: unify OpenWrt hosted source via @OPENWRT 2021-02-05 12:00:24 -10:00
layerscape ls-dpl: update source.codeaurora.org repository link 2023-06-11 15:20:01 +02:00
linux-firmware linux-firmware: update to 20231211 2023-12-19 14:22:28 +01:00
prism54-firmware prism54-firmware: set DL_DIR to package specific subdirectory 2022-09-22 16:48:37 -04:00
wireless-regdb wireless-regdb: update to 2023.09.01 2023-09-03 23:06:09 +02:00