20ea6adbf1
Build system: x86_64 Build-tested: bcm2708, bcm2709, bcm2710, bcm2711 Run-tested: bcm2708/RPiB+, bcm2709/RPi3B, bcm2710/RPi3B, bcm2711/RPi4B Signed-off-by: Marty Jones <mj8263788@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
45 lines
1.5 KiB
Diff
45 lines
1.5 KiB
Diff
From 8387866a1d91c78d9aa75052821b1dafa25fff0f Mon Sep 17 00:00:00 2001
|
|
From: Alex Crawford <raspberrypi/linux@code.acrawford.com>
|
|
Date: Fri, 28 Jan 2022 13:36:51 -0800
|
|
Subject: [PATCH] i2c: bcm2835: Make clock-stretch timeout configurable
|
|
|
|
The default clock-stretch timeout is 35 mS, which works well for
|
|
SMBus, but there are some I2C devices which can stretch the clock even
|
|
longer. Rather than trying to prescribe a safe default for everyone,
|
|
allow the timeout to be configured.
|
|
|
|
Signed-off-by: Alex Crawford <raspberrypi/linux@code.acrawford.com>
|
|
---
|
|
drivers/i2c/busses/i2c-bcm2835.c | 10 +++++++---
|
|
1 file changed, 7 insertions(+), 3 deletions(-)
|
|
|
|
--- a/drivers/i2c/busses/i2c-bcm2835.c
|
|
+++ b/drivers/i2c/busses/i2c-bcm2835.c
|
|
@@ -60,6 +60,10 @@ static unsigned int debug;
|
|
module_param(debug, uint, 0644);
|
|
MODULE_PARM_DESC(debug, "1=err, 2=isr, 3=xfer");
|
|
|
|
+static unsigned int clk_tout_ms = 35; /* SMBUs-recommended 35ms */
|
|
+module_param(clk_tout_ms, uint, 0644);
|
|
+MODULE_PARM_DESC(clk_tout_ms, "clock-stretch timeout (mS)");
|
|
+
|
|
#define BCM2835_DEBUG_MAX 512
|
|
struct bcm2835_debug {
|
|
struct i2c_msg *msg;
|
|
@@ -219,12 +223,12 @@ static int clk_bcm2835_i2c_set_rate(stru
|
|
(redl << BCM2835_I2C_REDL_SHIFT));
|
|
|
|
/*
|
|
- * Set the clock stretch timeout to the SMBUs-recommended 35ms.
|
|
+ * Set the clock stretch timeout.
|
|
*/
|
|
- if (rate > 0xffff*1000/35)
|
|
+ if (rate > 0xffff*1000/clk_tout_ms)
|
|
clk_tout = 0xffff;
|
|
else
|
|
- clk_tout = 35*rate/1000;
|
|
+ clk_tout = clk_tout_ms*rate/1000;
|
|
|
|
bcm2835_i2c_writel(div->i2c_dev, BCM2835_I2C_CLKT, clk_tout);
|
|
|